Subversion Repositories debouncer_vhdl

Release 13.1 Map O.40d (nt)
Xilinx Map Application Log File for Design 'debounce_atlys_top'

Design Information
------------------
Command Line   : map -intstyle ise -p xc6slx45-csg324-2 -w -logic_opt off -ol
high -xe n -t 1 -xt 0 -register_duplication off -r 4 -global_opt area
-equivalent_register_removal on -mt 2 -detail -ir off -pr off -lc area -power
off -o debounce_atlys_top_map.ncd debounce_atlys_top.ngd debounce_atlys_top.pcf 
Target Device  : xc6slx45
Target Package : csg324
Target Speed   : -2
Mapper Version : spartan6 -- $Revision: 1.55 $
Mapped Date    : Thu Aug 11 21:31:29 2011

Running global optimization...
Mapping design into LUTs...
Running directed packing...
Running delay-based LUT packing...
Updating timing models...
INFO:Map:215 - The Interim Design Summary has been generated in the MAP Report
   (.mrp).
Running timing-driven placement...
Total REAL time at the beginning of Placer: 9 secs 
Total CPU  time at the beginning of Placer: 7 secs 

Phase 1.1  Initial Placement Analysis
Phase 1.1  Initial Placement Analysis (Checksum:ed93dd56) REAL time: 10 secs 

Phase 2.7  Design Feasibility Check
Phase 2.7  Design Feasibility Check (Checksum:ed93dd56) REAL time: 10 secs 

Phase 3.31  Local Placement Optimization
Phase 3.31  Local Placement Optimization (Checksum:ed93dd56) REAL time: 10 secs 

Phase 4.2  Initial Placement for Architecture Specific Features

Phase 4.2  Initial Placement for Architecture Specific Features
(Checksum:feb5d5d6) REAL time: 12 secs 

Phase 5.36  Local Placement Optimization
Phase 5.36  Local Placement Optimization (Checksum:feb5d5d6) REAL time: 12 secs 

Phase 6.30  Global Clock Region Assignment
Phase 6.30  Global Clock Region Assignment (Checksum:feb5d5d6) REAL time: 12 secs 

Phase 7.3  Local Placement Optimization
Phase 7.3  Local Placement Optimization (Checksum:feb5d5d6) REAL time: 12 secs 

Phase 8.5  Local Placement Optimization
Phase 8.5  Local Placement Optimization (Checksum:feb5d5d6) REAL time: 12 secs 

Phase 9.8  Global Placement
...
..
Phase 9.8  Global Placement (Checksum:6e34e131) REAL time: 12 secs 

Phase 10.5  Local Placement Optimization
Phase 10.5  Local Placement Optimization (Checksum:6e34e131) REAL time: 12 secs 

Phase 11.18  Placement Optimization
Phase 11.18  Placement Optimization (Checksum:ddc79b4e) REAL time: 12 secs 

Phase 12.5  Local Placement Optimization
Phase 12.5  Local Placement Optimization (Checksum:ddc79b4e) REAL time: 12 secs 

Phase 13.34  Placement Validation
Phase 13.34  Placement Validation (Checksum:d90e05db) REAL time: 12 secs 

Total REAL time to Placer completion: 12 secs 
Total CPU  time to Placer completion: 10 secs 
Running post-placement packing...
Writing output files...

Design Summary
--------------

Design Summary:
Number of errors:      0
Number of warnings:    0
Slice Logic Utilization:
  Number of Slice Registers:                    42 out of  54,576    1%
    Number used as Flip Flops:                  42
    Number used as Latches:                      0
    Number used as Latch-thrus:                  0
    Number used as AND/OR logics:                0
  Number of Slice LUTs:                         37 out of  27,288    1%
    Number used as logic:                       36 out of  27,288    1%
      Number using O6 output only:              18
      Number using O5 output only:              11
      Number using O5 and O6:                    7
      Number used as ROM:                        0
    Number used as Memory:                       0 out of   6,408    0%
    Number used exclusively as route-thrus:      1
      Number with same-slice register load:      0
      Number with same-slice carry load:         1
      Number with other load:                    0

Slice Logic Distribution:
  Number of occupied Slices:                    19 out of   6,822    1%
  Number of LUT Flip Flop pairs used:           56
    Number with an unused Flip Flop:            20 out of      56   35%
    Number with an unused LUT:                  19 out of      56   33%
    Number of fully used LUT-FF pairs:          17 out of      56   30%
    Number of unique control sets:               3
    Number of slice register sites lost
      to control set restrictions:               6 out of  54,576    1%

  A LUT Flip Flop pair for this architecture represents one LUT paired with
  one Flip Flop within a slice.  A control set is a unique combination of
  clock, reset, set, and enable signals for a registered element.
  The Slice Logic Distribution report is not meaningful if the design is
  over-mapped for a non-slice resource or if Placement fails.

IO Utilization:
  Number of bonded IOBs:                        31 out of     218   14%
    Number of LOCed IOBs:                       31 out of      31  100%

Specific Feature Utilization:
  Number of RAMB16BWERs:                         0 out of     116    0%
  Number of RAMB8BWERs:                          0 out of     232    0%
  Number of BUFIO2/BUFIO2_2CLKs:                 0 out of      32    0%
  Number of BUFIO2FB/BUFIO2FB_2CLKs:             0 out of      32    0%
  Number of BUFG/BUFGMUXs:                       1 out of      16    6%
    Number used as BUFGs:                        1
    Number used as BUFGMUX:                      0
  Number of DCM/DCM_CLKGENs:                     0 out of       8    0%
  Number of ILOGIC2/ISERDES2s:                   0 out of     376    0%
  Number of IODELAY2/IODRP2/IODRP2_MCBs:         0 out of     376    0%
  Number of OLOGIC2/OSERDES2s:                   0 out of     376    0%
  Number of BSCANs:                              0 out of       4    0%
  Number of BUFHs:                               0 out of     256    0%
  Number of BUFPLLs:                             0 out of       8    0%
  Number of BUFPLL_MCBs:                         0 out of       4    0%
  Number of DSP48A1s:                            0 out of      58    0%
  Number of ICAPs:                               0 out of       1    0%
  Number of MCBs:                                0 out of       2    0%
  Number of PCILOGICSEs:                         0 out of       2    0%
  Number of PLL_ADVs:                            0 out of       4    0%
  Number of PMVs:                                0 out of       1    0%
  Number of STARTUPs:                            0 out of       1    0%
  Number of SUSPEND_SYNCs:                       0 out of       1    0%

Average Fanout of Non-Clock Nets:                2.37

Peak Memory Usage:  295 MB
Total REAL time to MAP completion:  14 secs 
Total CPU time to MAP completion (all processors):   11 secs 

Mapping completed.
See MAP report file "debounce_atlys_top_map.mrp" for details.