OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_spram_256x32.v] - Rev 360

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  eth_spram_256x32.v                                          ////
////                                                              ////
////  This file is part of the Ethernet IP core project           ////
////  http://www.opencores.org/project,ethmac                     ////
////                                                              ////
////  Author(s):                                                  ////
////      - Igor Mohor (igorM@opencores.org)                      ////
////                                                              ////
////  All additional information is available in the Readme.txt   ////
////  file.                                                       ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2001, 2002 Authors                             ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.9  2003/12/05 12:43:06  tadejm
// Corrected address mismatch for xilinx RAMB4_S8 model which has wider address than RAMB4_S16.
//
// Revision 1.8  2003/12/04 14:59:13  simons
// Lapsus fixed (!we -> ~we).
//
// Revision 1.7  2003/11/12 18:24:59  tadejm
// WISHBONE slave changed and tested from only 32-bit accesss to byte access.
//
// Revision 1.6  2003/10/17 07:46:15  markom
// mbist signals updated according to newest convention
//
// Revision 1.5  2003/08/14 16:42:58  simons
// Artisan ram instance added.
//
// Revision 1.4  2002/10/18 17:04:20  tadejm
// Changed BIST scan signals.
//
// Revision 1.3  2002/10/10 16:29:30  mohor
// BIST added.
//
// Revision 1.2  2002/09/23 18:24:31  mohor
// ETH_VIRTUAL_SILICON_RAM supported (for ASIC implementation).
//
// Revision 1.1  2002/07/23 16:36:09  mohor
// ethernet spram added. So far a generic ram and xilinx RAMB4 are used.
//
//
//
 
`include "ethmac_defines.v"
`include "timescale.v"
 
module eth_spram_256x32(
	// Generic synchronous single-port RAM interface
	clk, rst, ce, we, oe, addr, di, dato
 
`ifdef ETH_BIST
  ,
  // debug chain signals
  mbist_si_i,       // bist scan serial in
  mbist_so_o,       // bist scan serial out
  mbist_ctrl_i        // bist chain shift control
`endif
 
 
 
);
 
   //
   // Generic synchronous single-port RAM interface
   //
   input           clk;  // Clock, rising edge
   input           rst;  // Reset, active high
   input           ce;   // Chip enable input, active high
   input  [3:0]    we;   // Write enable input, active high
   input           oe;   // Output enable input, active high
   input  [7:0]    addr; // address bus inputs
   input  [31:0]   di;   // input data bus
   output [31:0]   dato;   // output data bus
 
`ifdef ETH_BIST
   input           mbist_si_i;       // bist scan serial in
   output          mbist_so_o;       // bist scan serial out
   input [`ETH_MBIST_CTRL_WIDTH - 1:0] mbist_ctrl_i;       // bist chain shift control
`endif
 
`ifdef ETH_XILINX_RAMB4
 
   /*RAMB4_S16 ram0
    (
    .DO      (do[15:0]),
    .ADDR    (addr),
    .DI      (di[15:0]),
    .EN      (ce),
    .CLK     (clk),
    .WE      (we),
    .RST     (rst)
    );
 
    RAMB4_S16 ram1
    (
    .DO      (do[31:16]),
    .ADDR    (addr),
    .DI      (di[31:16]),
    .EN      (ce),
    .CLK     (clk),
    .WE      (we),
    .RST     (rst)
    );*/
 
   RAMB4_S8 ram0
     (
      .DO      (dato[7:0]),
      .ADDR    ({1'b0, addr}),
      .DI      (di[7:0]),
      .EN      (ce),
      .CLK     (clk),
      .WE      (we[0]),
      .RST     (rst)
      );
 
   RAMB4_S8 ram1
     (
      .DO      (dato[15:8]),
      .ADDR    ({1'b0, addr}),
      .DI      (di[15:8]),
      .EN      (ce),
      .CLK     (clk),
      .WE      (we[1]),
      .RST     (rst)
      );
 
   RAMB4_S8 ram2
     (
      .DO      (dato[23:16]),
      .ADDR    ({1'b0, addr}),
      .DI      (di[23:16]),
      .EN      (ce),
      .CLK     (clk),
      .WE      (we[2]),
      .RST     (rst)
      );
 
   RAMB4_S8 ram3
     (
      .DO      (dato[31:24]),
      .ADDR    ({1'b0, addr}),
      .DI      (di[31:24]),
      .EN      (ce),
      .CLK     (clk),
      .WE      (we[3]),
      .RST     (rst)
      );
 
`else   // !ETH_XILINX_RAMB4
 `ifdef  ETH_VIRTUAL_SILICON_RAM
  `ifdef ETH_BIST
   //vs_hdsp_256x32_bist ram0_bist
   vs_hdsp_256x32_bw_bist ram0_bist
  `else
     //vs_hdsp_256x32 ram0
     vs_hdsp_256x32_bw ram0
  `endif
       (
        .CK         (clk),
        .CEN        (!ce),
        .WEN        (~we),
        .OEN        (!oe),
        .ADR        (addr),
        .DI         (di),
        .DOUT       (dato)
 
  `ifdef ETH_BIST
        ,
        // debug chain signals
        .mbist_si_i       (mbist_si_i),
        .mbist_so_o       (mbist_so_o),
        .mbist_ctrl_i       (mbist_ctrl_i)
  `endif
       );
 
 `else   // !ETH_VIRTUAL_SILICON_RAM
 
  `ifdef  ETH_ARTISAN_RAM
   `ifdef ETH_BIST
   //art_hssp_256x32_bist ram0_bist
   art_hssp_256x32_bw_bist ram0_bist
   `else
     //art_hssp_256x32 ram0
     art_hssp_256x32_bw ram0
   `endif
       (
        .CLK        (clk),
        .CEN        (!ce),
        .WEN        (~we),
        .OEN        (!oe),
        .A          (addr),
        .D          (di),
        .Q          (dato)
 
   `ifdef ETH_BIST
        ,
        // debug chain signals
        .mbist_si_i       (mbist_si_i),
        .mbist_so_o       (mbist_so_o),
        .mbist_ctrl_i     (mbist_ctrl_i)
   `endif
       );
 
  `else   // !ETH_ARTISAN_RAM
   `ifdef ETH_ALTERA_ALTSYNCRAM
 
   altera_spram_256x32	altera_spram_256x32_inst
     (
      .address        (addr),
      .wren           (ce & we),
      .clock          (clk),
      .data           (di),
      .q              (dato)
      );  //exemplar attribute altera_spram_256x32_inst NOOPT TRUE
 
   `else   // !ETH_ALTERA_ALTSYNCRAM
 
 
   //
   // Generic single-port synchronous RAM model
   //
 
   //
   // Generic RAM's registers and wires
   //
   reg  [ 7: 0] mem0 [255:0]; // RAM content
   reg  [15: 8] mem1 [255:0]; // RAM content
   reg  [23:16] mem2 [255:0]; // RAM content
   reg  [31:24] mem3 [255:0]; // RAM content
   wire [31:0]  q;            // RAM output
   reg   [7:0]   raddr;        // RAM read address
   //
   // Data output drivers
   //
   assign dato = (oe & ce) ? q : {32{1'bz}};
 
   //
   // RAM read and write
   //
 
   // read operation
   always@(posedge clk)
     if (ce)
       raddr <=  addr; // read address needs to be registered to read clock
 
   assign  q = rst ? {32{1'b0}} : {mem3[raddr],
                                   mem2[raddr],
                                   mem1[raddr],
                                   mem0[raddr]};
 
    // write operation
    always@(posedge clk)
    begin
		if (ce && we[3])
		  mem3[addr] <=  di[31:24];
		if (ce && we[2])
		  mem2[addr] <=  di[23:16];
		if (ce && we[1])
		  mem1[addr] <=  di[15: 8];
		if (ce && we[0])
		  mem0[addr] <=  di[ 7: 0];
	     end
 
   // Task prints range of memory
   // *** Remember that tasks are non reentrant, don't call this task in parallel for multiple instantiations. 
   task print_ram;
      input [7:0] start;
      input [7:0] finish;
      integer     rnum;
      begin
    	 for (rnum={24'd0,start};rnum<={24'd0,finish};rnum=rnum+1)
           $display("Addr %h = %0h %0h %0h %0h",rnum,mem3[rnum],mem2[rnum],mem1[rnum],mem0[rnum]);
      end
   endtask
 
   `endif  // !ETH_ALTERA_ALTSYNCRAM
  `endif  // !ETH_ARTISAN_RAM
 `endif  // !ETH_VIRTUAL_SILICON_RAM
`endif  // !ETH_XILINX_RAMB4
 
endmodule
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.