Subversion Repositories fpu100

-------------------------------------------------------------------------------
--
-- Project:	<Floating Point Unit Core>
--  	
-- Description: post-normalization entity for the addition/subtraction unit
-------------------------------------------------------------------------------
--
--				100101011010011100100
--				110000111011100100000
--				100000111011000101101
--				100010111100101111001
--				110000111011101101001
--				010000001011101001010
--				110100111001001100001
--				110111010000001100111
--				110110111110001011101
--				101110110010111101000
--				100000010111000000000
--
-- 	Author:		 Jidan Al-eryani 
-- 	E-mail: 	 jidan@gmx.net
--
--  Copyright (C) 2006
--
--	This source file may be used and distributed without        
--	restriction provided that this copyright statement is not   
--	removed from the file and that any derivative work contains 
--	the original copyright notice and the associated disclaimer.
--                                                           
--		THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     
--	EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   
--	TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   
--	FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      
--	OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         
--	INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    
--	(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   
--	GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        
--	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
--	LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  
--	(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
--	OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         
--	POSSIBILITY OF SUCH DAMAGE. 
--
 
library ieee ;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_misc.all;
 
library work;
use work.fpupack.all;
 
entity post_norm_addsub is
	port(
			clk_i 			: in std_logic;
			opa_i 			: in std_logic_vector(FP_WIDTH-1 downto 0);
			opb_i 			: in std_logic_vector(FP_WIDTH-1 downto 0);
			fract_28_i		: in std_logic_vector(FRAC_WIDTH+4 downto 0);	-- carry(1) & hidden(1) & fraction(23) & guard(1) & round(1) & sticky(1)
			exp_i			: in std_logic_vector(EXP_WIDTH-1 downto 0);
			sign_i			: in std_logic;
			fpu_op_i		: in std_logic;
			rmode_i			: in std_logic_vector(1 downto 0);
			output_o		: out std_logic_vector(FP_WIDTH-1 downto 0);
			ine_o			: out std_logic
		);
end post_norm_addsub;
 
 
architecture rtl of post_norm_addsub is
 
 
signal s_opa_i, s_opb_i 	: std_logic_vector(FP_WIDTH-1 downto 0);
signal s_fract_28_i			: std_logic_vector(FRAC_WIDTH+4 downto 0);	
signal s_exp_i				: std_logic_vector(EXP_WIDTH-1 downto 0);
signal s_sign_i				: std_logic;
signal s_fpu_op_i			: std_logic;
signal s_rmode_i			: std_logic_vector(1 downto 0);
signal s_output_o			: std_logic_vector(FP_WIDTH-1 downto 0);
signal s_ine_o 				: std_logic;
signal s_overflow			: std_logic;
 
signal s_zeros, s_shr1, s_shl1 : std_logic_vector(5 downto 0);
signal s_shr2, s_carry : std_logic;
 
signal s_exp10: std_logic_vector(9 downto 0);
signal s_expo9_1, s_expo9_2, s_expo9_3: std_logic_vector(EXP_WIDTH downto 0);
 
signal s_fracto28_1, s_fracto28_2, s_fracto28_rnd : std_logic_vector(FRAC_WIDTH+4 downto 0);
 
signal s_roundup : std_logic;
signal s_sticky : std_logic;
 
signal s_zero_fract : std_logic;	
signal s_lost : std_logic;
signal s_infa, s_infb : std_logic;
signal s_nan_in, s_nan_op, s_nan_a, s_nan_b, s_nan_sign : std_logic;
 
begin
 
	-- Input Register
	--process(clk_i)
	--begin
	--	if rising_edge(clk_i) then	
			s_opa_i <= opa_i;
			s_opb_i <= opb_i;
			s_fract_28_i <= fract_28_i;
			s_exp_i <= exp_i;
			s_sign_i <= sign_i;
			s_fpu_op_i <= fpu_op_i;
			s_rmode_i <= rmode_i;
	--	end if;
	--end process;	
 
	-- Output Register
	process(clk_i)
	begin
		if rising_edge(clk_i) then	
			output_o <= s_output_o;
			ine_o <= s_ine_o;
		end if;
	end process;
 
	--*** Stage 1 ****
	-- figure out the output exponent and howmuch the fraction has to be shiftd right/left
 
	s_carry <= s_fract_28_i(27);
 
 
	s_zeros <= count_l_zeros(s_fract_28_i(26 downto 0)) when s_fract_28_i(27)='0' else "000000";
 
 
	s_exp10 <= ("00"&s_exp_i) + ("000000000"&s_carry) - ("0000"&s_zeros); -- negative flag & large flag & exp		
 
	process(clk_i)
	begin
	if rising_edge(clk_i) then
			if s_exp10(9)='1' or s_exp10="0000000000" then
				s_shr1 <= (others =>'0');
				if or_reduce(s_exp_i)/='0' then
					s_shl1 <= s_exp_i(5 downto 0) - "000001";
				else
					s_shl1 <= "000000";
				end if;
				s_expo9_1 <= "000000001";
			elsif s_exp10(8)='1' then
				s_shr1 <= (others =>'0');
				s_shl1 <= (others =>'0');
				s_expo9_1 <= "011111111";
			else
				s_shr1 <= ("00000"&s_carry);
				s_shl1 <= s_zeros;
				s_expo9_1 <= s_exp10(8 downto 0);
			end if;
	end if;
	end process;
 
---
	-- *** Stage 2 ***
	-- Shifting the fraction and rounding
 
	process(clk_i)
	begin
		if rising_edge(clk_i) then
			if s_shr1 /= "000000" then
				s_fracto28_1 <= shr(s_fract_28_i, s_shr1);
			else 
				s_fracto28_1 <= shl(s_fract_28_i, s_shl1); 
			end if;
		end if;
	end process;
 
	s_expo9_2 <= s_expo9_1 - "000000001" when s_fracto28_1(27 downto 26)="00" else s_expo9_1;
 
	-- round
	s_sticky <='1' when s_fracto28_1(0)='1' or (s_fract_28_i(0) and s_fract_28_i(27))='1' else '0'; --check last bit, before and after right-shift
 
	s_roundup <= s_fracto28_1(2) and ((s_fracto28_1(1) or s_sticky)or s_fracto28_1(3)) when s_rmode_i="00" else -- round to nearset even
							 (s_fracto28_1(2) or s_fracto28_1(1) or s_sticky) and (not s_sign_i) when s_rmode_i="10" else -- round up
							 (s_fracto28_1(2) or s_fracto28_1(1) or s_sticky) and (s_sign_i) when s_rmode_i="11" else -- round down
							 '0'; -- round to zero(truncate = no rounding)
 
	s_fracto28_rnd <= s_fracto28_1 + "0000000000000000000000001000" when s_roundup='1' else s_fracto28_1;
 
	-- ***Stage 3***
	-- right-shift after rounding (if necessary)
	s_shr2 <= s_fracto28_rnd(27); 
 
	s_expo9_3 <= s_expo9_2 + "000000001" when s_shr2='1' and s_expo9_2 /= "011111111" else s_expo9_2;
	s_fracto28_2 <= ("0"&s_fracto28_rnd(27 downto 1)) when s_shr2='1' else s_fracto28_rnd;	
-----
 
	s_infa <= '1' when s_opa_i(30 downto 23)="11111111"  else '0';
	s_infb <= '1' when s_opb_i(30 downto 23)="11111111"  else '0';
 
	s_nan_a <= '1' when (s_infa='1' and or_reduce (s_opa_i(22 downto 0))='1') else '0';
	s_nan_b <= '1' when (s_infb='1' and or_reduce (s_opb_i(22 downto 0))='1') else '0';
	s_nan_in <= '1' when s_nan_a='1' or  s_nan_b='1' else '0';
	s_nan_op <= '1' when (s_infa and s_infb)='1' and (s_opa_i(31) xor (s_fpu_op_i xor s_opb_i(31)) )='1' else '0'; -- inf-inf=Nan
 
	s_nan_sign <= s_sign_i when (s_nan_a and s_nan_b)='1' else
								s_opa_i(31) when s_nan_a='1' else 
								s_opb_i(31);
 
	-- check if result is inexact;
	s_lost <= (s_shr1(0) and s_fract_28_i(0)) or (s_shr2 and s_fracto28_rnd(0)) or or_reduce(s_fracto28_2(2 downto 0));
	s_ine_o <= '1' when (s_lost or s_overflow)='1' and (s_infa or s_infb)='0' else '0';	
 
	s_overflow <='1' when s_expo9_3="011111111" and (s_infa or s_infb)='0' else '0'; 
	s_zero_fract <= '1' when s_zeros=27 and s_fract_28_i(27)='0' else '0'; -- '1' if fraction result is zero
 
	process(s_sign_i, s_expo9_3, s_fracto28_2, s_nan_in, s_nan_op, s_nan_sign, s_infa, s_infb, s_overflow, s_zero_fract)
	begin
		if (s_nan_in or s_nan_op)='1' then
			s_output_o <= s_nan_sign & QNAN;
		elsif (s_infa or s_infb)='1' or s_overflow='1' then
				s_output_o <= s_sign_i & INF;	
		elsif s_zero_fract='1' then
				s_output_o <= s_sign_i & ZERO_VECTOR;
		else
				s_output_o <= s_sign_i & s_expo9_3(7 downto 0) & s_fracto28_2(25 downto 3);
		end if;
	end process;
 
 
end rtl;