Subversion Repositories ft816float

`timescale 1ns / 1ps
// ============================================================================
//        __
//   \\__/ o\    (C) 2006-2018  Robert Finch, Waterloo
//    \  __ /    All rights reserved.
//     \/_//     robfinch<remove>@finitron.ca
//       ||
//
//	fpDiv.v
//    - floating point divider
//    - parameterized width
//    - IEEE 754 representation
//
//
// This source file is free software: you can redistribute it and/or modify 
// it under the terms of the GNU Lesser General Public License as published 
// by the Free Software Foundation, either version 3 of the License, or     
// (at your option) any later version.                                      
//                                                                          
// This source file is distributed in the hope that it will be useful,      
// but WITHOUT ANY WARRANTY; without even the implied warranty of           
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            
// GNU General Public License for more details.                             
//                                                                          
// You should have received a copy of the GNU General Public License        
// along with this program.  If not, see <http://www.gnu.org/licenses/>.    
//                                                                          
//	Floating Point Multiplier / Divider
//
//Properties:
//+-inf * +-inf = -+inf    (this is handled by exOver)
//+-inf * 0     = QNaN
//+-0 / +-0      = QNaN
// ============================================================================
 
module fpDiv(clk, ce, ld, a, b, o, done, sign_exe, overflow, underflow);
 
parameter WID = 128;
localparam MSB = WID-1;
localparam EMSB = WID==128 ? 14 :
                  WID==96 ? 14 :
                  WID==80 ? 14 :
                  WID==64 ? 10 :
				  WID==52 ? 10 :
				  WID==48 ? 11 :
				  WID==44 ? 10 :
				  WID==42 ? 10 :
				  WID==40 ?  9 :
				  WID==32 ?  7 :
				  WID==24 ?  6 : 4;
localparam FMSB = WID==128 ? 111 :
                  WID==96 ? 79 :
                  WID==80 ? 63 :
                  WID==64 ? 51 :
				  WID==52 ? 39 :
				  WID==48 ? 34 :
				  WID==44 ? 31 :
				  WID==42 ? 29 :
				  WID==40 ? 28 :
				  WID==32 ? 22 :
				  WID==24 ? 15 : 9;
 
localparam FX = (FMSB+2)*2-1;	// the MSB of the expanded fraction
localparam EX = FX + 1 + EMSB + 1 + 1 - 1;
 
input clk;
input ce;
input ld;
input [MSB:0] a, b;
output [EX:0] o;
output done;
output sign_exe;
output overflow;
output underflow;
 
// registered outputs
reg sign_exe;
reg inf;
reg	overflow;
reg	underflow;
 
reg so;
reg [EMSB:0] xo;
reg [FX:0] mo;
assign o = {so,xo,mo};
 
// constants
wire [EMSB:0] infXp = {EMSB+1{1'b1}};	// infinite / NaN - all ones
// The following is the value for an exponent of zero, with the offset
// eg. 8'h7f for eight bit exponent, 11'h7ff for eleven bit exponent, etc.
wire [EMSB:0] bias = {1'b0,{EMSB{1'b1}}};	//2^0 exponent
// The following is a template for a quiet nan. (MSB=1)
wire [FMSB:0] qNaN  = {1'b1,{FMSB{1'b0}}};
 
// variables
wire [EMSB+2:0] ex1;	// sum of exponents
wire [(FMSB+9)*2-1:0] divo;
 
// Operands
wire sa, sb;			// sign bit
wire [EMSB:0] xa, xb;	// exponent bits
wire [FMSB+1:0] fracta, fractb;
wire a_dn, b_dn;			// a/b is denormalized
wire az, bz;
wire aInf, bInf;
wire aNan,bNan;
wire done1;
wire [7:0] lzcnt;
 
// -----------------------------------------------------------
// - decode the input operands
// - derive basic information
// - calculate exponent
// - calculate fraction
// -----------------------------------------------------------
 
fpDecomp #(WID) u1a (.i(a), .sgn(sa), .exp(xa), .fract(fracta), .xz(a_dn), .vz(az), .inf(aInf), .nan(aNan) );
fpDecomp #(WID) u1b (.i(b), .sgn(sb), .exp(xb), .fract(fractb), .xz(b_dn), .vz(bz), .inf(bInf), .nan(bNan) );
 
// Compute the exponent.
// - correct the exponent for denormalized operands
// - adjust the difference by the bias (add 127)
// - also factor in the different decimal position for division
assign ex1 = (xa|a_dn) - (xb|b_dn) + bias + FMSB + 9 - lzcnt;
 
// check for exponent underflow/overflow
wire under = ex1[EMSB+2];	// MSB set = negative exponent
wire over = (&ex1[EMSB:0] | ex1[EMSB+1]) & !ex1[EMSB+2];
 
// Perform divide
// could take either 1 or 16 clock cycles
fpdivr8 #(FMSB+9,2) u2 (.clk(clk), .ld(ld), .a({fracta,7'b0}), .b({fractb,7'b0}), .q(divo), .r(), .done(done1), .lzcnt(lzcnt));
delay1 #(1) u3 (.clk(clk), .ce(ce), .i(done1), .o(done));
 
 
// determine when a NaN is output
wire qNaNOut = (az&bz)|(aInf&bInf);
wire [(FMSB+9)*2-1:0] divo1 = divo[(FMSB+9)*2-1:0] << (lzcnt-2);
 
always @(posedge clk)
	if (ce) begin
		if (done1) begin
			casez({qNaNOut|aNan|bNan,bInf,bz,over,under})
			5'b1????:		xo = infXp;	// NaN exponent value
			5'b01???:		xo = 0;		// divide by inf
			5'b001??:		xo = infXp;	// divide by zero
			5'b0001?:		xo = infXp;	// overflow
			5'b00001:		xo = 0;		// underflow
			default:		xo = ex1;	// normal or underflow: passthru neg. exp. for normalization
			endcase
 
			casez({aNan,bNan,qNaNOut,bInf,bz,over})
			6'b1?????:      mo = {1'b1,a[FMSB:0],{FMSB+1{1'b0}}};
			6'b01????:      mo = {1'b1,b[FMSB:0],{FMSB+1{1'b0}}};
			6'b001???:		mo = {1'b1,qNaN[FMSB:0]|{aInf,1'b0}|{az,bz},{FMSB+1{1'b0}}};
			6'b0001??:		mo = 0;	// div by inf
			6'b00001?:		mo = 0;	// div by zero
			6'b000001:		mo = 0;	// Inf exponent
			default:		mo = divo1[(FMSB+9)*2-1:14];	// plain div
			endcase
 
			so  		= sa ^ sb;
			sign_exe 	= sa & sb;
			overflow	= over;
			underflow 	= under;
		end
	end
 
endmodule
 
module fpDivnr(clk, ce, ld, a, b, o, rm, done, sign_exe, inf, overflow, underflow);
parameter WID=32;
localparam MSB = WID-1;
localparam EMSB = WID==128 ? 14 :
                  WID==96 ? 14 :
                  WID==80 ? 14 :
                  WID==64 ? 10 :
				  WID==52 ? 10 :
				  WID==48 ? 11 :
				  WID==44 ? 10 :
				  WID==42 ? 10 :
				  WID==40 ?  9 :
				  WID==32 ?  7 :
				  WID==24 ?  6 : 4;
localparam FMSB = WID==128 ? 111 :
                  WID==96 ? 79 :
                  WID==80 ? 63 :
                  WID==64 ? 51 :
				  WID==52 ? 39 :
				  WID==48 ? 34 :
				  WID==44 ? 31 :
				  WID==42 ? 29 :
				  WID==40 ? 28 :
				  WID==32 ? 22 :
				  WID==24 ? 15 : 9;
 
localparam FX = (FMSB+2)*2-1;	// the MSB of the expanded fraction
localparam EX = FX + 1 + EMSB + 1 + 1 - 1;
input clk;
input ce;
input ld;
input  [MSB:0] a, b;
output [MSB:0] o;
input [2:0] rm;
output sign_exe;
output done;
output inf;
output overflow;
output underflow;
 
wire [EX:0] o1;
wire sign_exe1, inf1, overflow1, underflow1;
wire [MSB+3:0] fpn0;
wire done1;
 
fpDiv       #(WID) u1 (clk, ce, ld, a, b, o1, done1, sign_exe1, overflow1, underflow1);
fpNormalize #(WID) u2(.clk(clk), .ce(ce), .under(underflow1), .i(o1), .o(fpn0) );
fpRoundReg  #(WID) u3(.clk(clk), .ce(ce), .rm(rm), .i(fpn0), .o(o) );
delay2      #(1)   u4(.clk(clk), .ce(ce), .i(sign_exe1), .o(sign_exe));
delay2      #(1)   u5(.clk(clk), .ce(ce), .i(inf1), .o(inf));
delay2      #(1)   u6(.clk(clk), .ce(ce), .i(overflow1), .o(overflow));
delay2      #(1)   u7(.clk(clk), .ce(ce), .i(underflow1), .o(underflow));
delay2		#(1)   u8(.clk(clk), .ce(ce), .i(done1), .o(done));
endmodule