URL
https://opencores.org/ocsvn/gecko4/gecko4/trunk
Subversion Repositories gecko4
[/] [gecko4/] [trunk/] [GECKO4com/] [spartan200_an/] [vhdl/] [cmd_18_1e_if/] [cmd_18_1e_if-entity.vhdl] - Rev 5
Compare with Previous | Blame | View Log
-------------------------------------------------------------------------------- -- _ _ __ ____ -- -- / / | | / _| | __| -- -- | |_| | _ _ / / | |_ -- -- | _ | | | | | | | | _| -- -- | | | | | |_| | \ \_ | |__ -- -- |_| |_| \_____| \__| |____| microLab -- -- -- -- Bern University of Applied Sciences (BFH) -- -- Quellgasse 21 -- -- Room HG 4.33 -- -- 2501 Biel/Bienne -- -- Switzerland -- -- -- -- http://www.microlab.ch -- -------------------------------------------------------------------------------- -- GECKO4com -- -- 2010/2011 Dr. Theo Kluter -- -- This VHDL code is free code: you can redistribute it and/or modify -- it under the terms of the GNU General Public License as published by -- the Free Software Foundation, either version 3 of the License, or -- (at your option) any later version. -- -- This VHDL code is distributed in the hope that it will be useful, -- but WITHOUT ANY WARRANTY; without even the implied warranty of -- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -- GNU General Public License for more details. -- You should have received a copy of the GNU General Public License -- along with these sources. If not, see <http://www.gnu.org/licenses/>. -- LIBRARY ieee; USE ieee.std_logic_1164.all; USE ieee.std_logic_arith.all; ENTITY cmd_18_1e_if IS PORT ( clock : IN std_logic; reset : IN std_logic; -- Here the scpi interface is defined start_command : IN std_logic; command_id : IN std_logic_vector( 6 DOWNTO 0 ); command_done : OUT std_logic; -- Here the tx_fifo is defined push : OUT std_logic; push_size : OUT std_logic; push_data : OUT std_logic_vector( 7 DOWNTO 0 ); fifo_full : IN std_logic; -- Here the fpga_if is defined fpga_type : IN std_logic_vector( 2 DOWNTO 0 ); fpga_configured : IN std_logic; -- Here the flash if is defined flash_empty : IN std_logic; -- Here the board interface is defined n_usb_power : IN std_logic; n_bus_power : IN std_logic; n_usb_charge : IN std_logic); END cmd_18_1e_if;