OpenCores
URL https://opencores.org/ocsvn/mblite/mblite/trunk

Subversion Repositories mblite

[/] [mblite/] [trunk/] [hw/] [std/] [sram_4en.vhd] - Rev 2

Go to most recent revision | Compare with Previous | Blame | View Log

----------------------------------------------------------------------------------------------
--
--      Input file         : sram_4en.vhd
--      Design name        : sram_4en
--      Author             : Tamar Kranenburg
--      Company            : Delft University of Technology
--                         : Faculty EEMCS, Department ME&CE
--                         : Systems and Circuits group
--
--      Description          : Single Port Synchronous Random Access Memory with 4 write enable
--                             ports.
--      Architecture 'arch'  : Default implementation
--      Architecture 'arch2' : Alternative implementation
--
----------------------------------------------------------------------------------------------
 
LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
USE ieee.std_logic_unsigned.ALL;
 
LIBRARY mblite;
USE mblite.std_Pkg.ALL;
 
ENTITY sram_4en IS GENERIC
(
    WIDTH : positive := 32;
    SIZE  : positive := 16
);
PORT
(
    dat_o : OUT std_ulogic_vector(WIDTH - 1 DOWNTO 0);
    dat_i : IN std_ulogic_vector(WIDTH - 1 DOWNTO 0);
    adr_i : IN std_ulogic_vector(SIZE - 1 DOWNTO 0);
    wre_i : IN std_ulogic_vector(WIDTH/8 - 1 DOWNTO 0);
    ena_i : IN std_ulogic;
    clk_i : IN std_ulogic
);
END sram_4en;
 
-- Special implementation using four separate RAMs
-- this implementation is harder to simulate since
-- it can not be easily loaded with data. However,
-- synthesizers may give better results.
--ARCHITECTURE arch2 OF sram_4en IS
--BEGIN
--    CON: FOR i IN 0 TO WIDTH/8 - 1 GENERATE
--        mem : sram GENERIC MAP
--        (
--            WIDTH   => 8,
--            SIZE    => SIZE
--        )
--        PORT MAP
--        (
--            dat_o   => dat_o((i+1)*8 - 1 DOWNTO i*8),
--            dat_i   => dat_i((i+1)*8 - 1 DOWNTO i*8),
--            adr_i   => adr_i,
--            wre_i   => wre_i(i),
--            ena_i   => ena_i,
--            clk_i   => clk_i
--        );
--    END GENERATE;
--END arch2;
 
-- Standard implementation
ARCHITECTURE arch OF sram_4en IS
 
    TYPE ram_type IS array(2 ** SIZE - 1 DOWNTO 0) OF std_ulogic_vector(WIDTH - 1 DOWNTO 0);
    TYPE sel_type IS array(WIDTH/8 - 1 DOWNTO 0) OF std_ulogic_vector(7 DOWNTO 0);
 
    SIGNAL ram: ram_type;
    SIGNAL di: sel_type;
BEGIN
    PROCESS(wre_i, dat_i, adr_i)
    BEGIN
        FOR i IN 0 TO WIDTH/8 - 1 LOOP
            IF wre_i(i) = '1' THEN
                di(i) <= dat_i((i+1)*8 - 1 DOWNTO i*8);
            ELSE
                di(i) <= ram(my_conv_integer(adr_i))((i+1)*8 - 1 DOWNTO i*8);
            END IF;
        END LOOP;
    END PROCESS;
 
    PROCESS(clk_i)
    BEGIN
        IF rising_edge(clk_i) THEN
            IF ena_i = '1' THEN
                ram(my_conv_integer(adr_i)) <= di(3) & di(2) & di(1) & di(0);
                dat_o <= di(3) & di(2) & di(1) & di(0);
            END IF;
        END IF;
    END PROCESS;
END arch;
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.