OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] [rc-1.0/] [utils/] [setup/] [or1200v1_hwbkpt.patch] - Rev 167

Go to most recent revision | Compare with Previous | Blame | View Log

--- ../../../Bennu/Hardware/or1200v1/rtl/verilog/or1200_defines.v	2010-08-25 23:25:38.000000000 -0500
+++ ./or1200_defines.v	2010-08-26 21:31:42.000000000 -0500
@@ -971,7 +971,7 @@
 // however already enough for use
 // with or32 gdb)
 //
-//`define OR1200_DU_HWBKPTS
+`define OR1200_DU_HWBKPTS
 
 // Number of DVR/DCR pairs if HW breakpoints enabled
 `define OR1200_DU_DVRDCR_PAIRS 8
@@ -1038,17 +1038,15 @@
 `define OR1200_DU_DMR1_CW7	15:14
 `define OR1200_DU_DMR1_CW8	17:16
 `define OR1200_DU_DMR1_CW9	19:18
-`define OR1200_DU_DMR1_CW10	21:20
+`define OR1200_DU_DMR1_RES	21:20
 `define OR1200_DU_DMR1_ST	22
 `define OR1200_DU_DMR1_BT	23
-`define OR1200_DU_DMR1_DXFW	24
-`define OR1200_DU_DMR1_ETE	25
 
 // DMR2 bits
 `define OR1200_DU_DMR2_WCE0	0
 `define OR1200_DU_DMR2_WCE1	1
-`define OR1200_DU_DMR2_AWTC	12:2
-`define OR1200_DU_DMR2_WGB	23:13
+`define OR1200_DU_DMR2_AWTC	11:2
+`define OR1200_DU_DMR2_WGB	21:12
 
 // DWCR bits
 `define OR1200_DU_DWCR_COUNT	15:0
--- /cygdrive/c/Projects/Bennu/Hardware/or1200v1/rtl/verilog/or1200_top.v	2010-08-25 23:25:40.000000000 -0500
+++ ./or1200_top.v	2010-06-12 16:59:02.000000000 -0500
@@ -43,6 +43,13 @@
 //
 // CVS Revision History
 //
+// $Log: or1200v1_hwbkpt.patch,v $
+// Revision 1.1  2010-08-27 02:43:07  Nathan
+// Moved patches for third-party software to a separate, dedicated directory structure.
+//
+// Revision 1.13  2004/06/08 18:17:36  lampret
+// Non-functional changes. Coding style fixes.
+//
 // $Log: not supported by cvs2svn $
 // Revision 1.12  2004/04/05 08:29:57  lampret
 // Merged branch_qmem into main tree.
@@ -933,6 +936,7 @@ or1200_du or1200_du(
 	.dcpu_cycstb_i(dcpu_cycstb_cpu),
 	.dcpu_we_i(dcpu_we_cpu),
 	.dcpu_adr_i(dcpu_adr_cpu),
+	.dcpu_be_i(dcpu_sel_cpu),
 	.dcpu_dat_lsu(dcpu_dat_cpu),
 	.dcpu_dat_dc(dcpu_dat_qmem),
 	.icpu_cycstb_i(icpu_cycstb_cpu),
--- /cygdrive/c/Projects/Bennu/Hardware/or1200v1/rtl/verilog/or1200_du.v	2010-08-25 23:25:38.000000000 -0500
+++ ./or1200_du.v	2010-08-26 21:28:32.000000000 -0500
@@ -124,8 +124,8 @@
 module or1200_du(
 	// RISC Internal Interface
 	clk, rst,
-	dcpu_cycstb_i, dcpu_we_i, dcpu_adr_i, dcpu_dat_lsu,
-	dcpu_dat_dc, icpu_cycstb_i,
+	dcpu_cycstb_i, dcpu_we_i, dcpu_adr_i, dcpu_be_i, 
+	dcpu_dat_lsu, dcpu_dat_dc, icpu_cycstb_i,
 	ex_freeze, branch_op, ex_insn, id_pc,
 	spr_dat_npc, rf_dataw,
 	du_dsr, du_stall, du_addr, du_dat_i, du_dat_o,
@@ -152,6 +152,7 @@ input				rst;		// Reset
 input				dcpu_cycstb_i;	// LSU status
 input				dcpu_we_i;	// LSU status
 input	[31:0]			dcpu_adr_i;	// LSU addr
+input   [3:0]       dcpu_be_i;
 input	[31:0]			dcpu_dat_lsu;	// LSU store data
 input	[31:0]			dcpu_dat_dc;	// LSU load data
 input	[`OR1200_FETCHOP_WIDTH-1:0]	icpu_cycstb_i;	// IFETCH unit status
@@ -192,6 +193,7 @@ input	[dw-1:0]	dbg_dat_i;	// External Da
 output	[dw-1:0]	dbg_dat_o;	// External Data Output
 output			dbg_ack_o;	// External Data Acknowledge (not WB compatible)
 
+reg	[9:0]		wp;
 
 //
 // Some connections go directly from the CPU through DU to Debug I/F
@@ -216,7 +218,7 @@ assign dbg_is_o = 2'b00;
 assign dbg_lss_o = dcpu_cycstb_i ? {dcpu_we_i, 3'b000} : 4'b0000;
 assign dbg_is_o = {1'b0, icpu_cycstb_i};
 `endif
-assign dbg_wp_o = 11'b000_0000_0000;
+assign dbg_wp_o = {1'b0, wp};  //11'b000_0000_0000;
 assign dbg_dat_o = du_dat_i;
 
 //
@@ -253,9 +255,9 @@ wire	[24:0]			dmr1;		// DMR1 not impleme
 // Debug Mode Register 2
 //
 `ifdef OR1200_DU_DMR2
-reg	[23:0]			dmr2;		// DMR2 implemented
+reg	[21:0]			dmr2;		// DMR2 implemented
 `else
-wire	[23:0]			dmr2;		// DMR2 not implemented
+wire	[21:0]			dmr2;		// DMR2 not implemented
 `endif
 
 //
@@ -473,6 +475,14 @@ reg	[31:0]			match_cond4_ct;
 reg	[31:0]			match_cond5_ct;
 reg	[31:0]			match_cond6_ct;
 reg	[31:0]			match_cond7_ct;
+reg	[31:0]			match_cond0_tmp;
+reg	[31:0]			match_cond1_tmp;
+reg	[31:0]			match_cond2_tmp;
+reg	[31:0]			match_cond3_tmp;
+reg	[31:0]			match_cond4_tmp;
+reg	[31:0]			match_cond5_tmp;
+reg	[31:0]			match_cond6_tmp;
+reg	[31:0]			match_cond7_tmp;
 reg				match_cond0_stb;
 reg				match_cond1_stb;
 reg				match_cond2_stb;
@@ -491,9 +501,16 @@ reg				match6;
 reg				match7;
 reg				wpcntr0_match;
 reg				wpcntr1_match;
-reg				incr_wpcntr0;
-reg				incr_wpcntr1;
-reg	[10:0]			wp;
+reg             wpcntr0_armed;
+reg             wpcntr0_oneshot;
+reg             wpcntr1_armed;
+reg             wpcntr1_oneshot;
+wire			incr_wpcntr0;
+reg             incr_wpcntr0_latched;
+wire            incr_wpcntr1;
+reg             incr_wpcntr1_latched;
+reg             du_hwbkpt_latched;
+reg [9:0]       wp_latched;
 `endif
 wire				du_hwbkpt;
 `ifdef OR1200_DU_READREGS
@@ -670,11 +687,11 @@ assign dmr1 = 25'h000_0000;
 `ifdef OR1200_DU_DMR2
 always @(posedge clk or posedge rst)
 	if (rst)
-		dmr2 <= 24'h00_0000;
+		dmr2 <= 22'h00_0000;
 	else if (dmr2_sel && spr_write)
-		dmr2 <= #1 spr_dat_i[23:0];
+		dmr2 <= #1 spr_dat_i[21:0];
 `else
-assign dmr2 = 24'h00_0000;
+assign dmr2 = 22'h00_0000;
 `endif
 
 //
@@ -815,9 +832,9 @@ assign dvr7 = 32'h0000_0000;
 `ifdef OR1200_DU_DCR0
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr0 <= 8'h00;
+		dcr0 <= 8'h01;
 	else if (dcr0_sel && spr_write)
-		dcr0 <= #1 spr_dat_i[7:0];
+		dcr0 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr0 = 8'h00;
 `endif
@@ -828,9 +845,9 @@ assign dcr0 = 8'h00;
 `ifdef OR1200_DU_DCR1
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr1 <= 8'h00;
+		dcr1 <= 8'h01;
 	else if (dcr1_sel && spr_write)
-		dcr1 <= #1 spr_dat_i[7:0];
+		dcr1 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr1 = 8'h00;
 `endif
@@ -841,9 +858,9 @@ assign dcr1 = 8'h00;
 `ifdef OR1200_DU_DCR2
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr2 <= 8'h00;
+		dcr2 <= 8'h01;
 	else if (dcr2_sel && spr_write)
-		dcr2 <= #1 spr_dat_i[7:0];
+		dcr2 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr2 = 8'h00;
 `endif
@@ -854,9 +871,9 @@ assign dcr2 = 8'h00;
 `ifdef OR1200_DU_DCR3
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr3 <= 8'h00;
+		dcr3 <= 8'h01;
 	else if (dcr3_sel && spr_write)
-		dcr3 <= #1 spr_dat_i[7:0];
+		dcr3 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr3 = 8'h00;
 `endif
@@ -867,9 +884,9 @@ assign dcr3 = 8'h00;
 `ifdef OR1200_DU_DCR4
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr4 <= 8'h00;
+		dcr4 <= 8'h01;
 	else if (dcr4_sel && spr_write)
-		dcr4 <= #1 spr_dat_i[7:0];
+		dcr4 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr4 = 8'h00;
 `endif
@@ -880,9 +897,9 @@ assign dcr4 = 8'h00;
 `ifdef OR1200_DU_DCR5
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr5 <= 8'h00;
+		dcr5 <= 8'h01;
 	else if (dcr5_sel && spr_write)
-		dcr5 <= #1 spr_dat_i[7:0];
+		dcr5 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr5 = 8'h00;
 `endif
@@ -893,9 +910,9 @@ assign dcr5 = 8'h00;
 `ifdef OR1200_DU_DCR6
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr6 <= 8'h00;
+		dcr6 <= 8'h01;
 	else if (dcr6_sel && spr_write)
-		dcr6 <= #1 spr_dat_i[7:0];
+		dcr6 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr6 = 8'h00;
 `endif
@@ -906,9 +923,9 @@ assign dcr6 = 8'h00;
 `ifdef OR1200_DU_DCR7
 always @(posedge clk or posedge rst)
 	if (rst)
-		dcr7 <= 8'h00;
+		dcr7 <= 8'h01;
 	else if (dcr7_sel && spr_write)
-		dcr7 <= #1 spr_dat_i[7:0];
+		dcr7 <= #1 {spr_dat_i[7:1], 1'b1};
 `else
 assign dcr7 = 8'h00;
 `endif
@@ -952,7 +969,7 @@ always @(spr_addr or dsr or drr or dmr1
 	or dvr5 or dvr6 or dvr7
 	or dcr0 or dcr1 or dcr2 or dcr3 or dcr4
 	or dcr5 or dcr6 or dcr7
-	or dwcr0 or dwcr1
+	or dwcr0 or dwcr1 or wp_latched
 `ifdef OR1200_DU_TB_IMPLEMENTED
 	or tb_wadr or tbia_dat_o or tbim_dat_o
 	or tbar_dat_o or tbts_dat_o
@@ -1029,7 +1046,7 @@ always @(spr_addr or dsr or drr or dmr1
 `endif
 `ifdef OR1200_DU_DMR2
 		`OR1200_DU_DMR2:
-			spr_dat_o = {8'h00, dmr2};
+			spr_dat_o = {wp_latched, dmr2};
 `endif
 `ifdef OR1200_DU_DWCR0
 		`OR1200_DU_DWCR0:
@@ -1077,23 +1094,50 @@ assign du_dsr = dsr;
 always @(dcr0 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr0[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond0_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond0_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond0_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond0_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond0_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond0_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond0_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond0_tmp = id_pc;		// insn fetch EA
+		3'b010:	match_cond0_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond0_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond0_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond0_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond0_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond0_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses (Match Condition 0)
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR
+always @(match_cond0_tmp or dcr0 or dcpu_be_i)
+  case (dcr0[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond0_ct = { {24{dcr0[`OR1200_DU_DCR_SC] & match_cond0_tmp[31]}}, match_cond0_tmp[31:24]};
+        4'b0100: match_cond0_ct = { {24{dcr0[`OR1200_DU_DCR_SC] & match_cond0_tmp[23]}}, match_cond0_tmp[23:16]};
+        4'b0010: match_cond0_ct = { {24{dcr0[`OR1200_DU_DCR_SC] & match_cond0_tmp[15]}}, match_cond0_tmp[15:8]};
+        4'b0001: match_cond0_ct = { {24{dcr0[`OR1200_DU_DCR_SC] & match_cond0_tmp[7] }}, match_cond0_tmp[7:0]};
+        4'b1100: match_cond0_ct = { {16{dcr0[`OR1200_DU_DCR_SC] & match_cond0_tmp[31]}}, match_cond0_tmp[31:16]};
+        4'b0011: match_cond0_ct = { {16{dcr0[`OR1200_DU_DCR_SC] & match_cond0_tmp[15]}}, match_cond0_tmp[15:0]};
+        default: match_cond0_ct = match_cond0_tmp;
+      endcase
+    end
+    default: match_cond0_ct = match_cond0_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 0)
 //
-always @(dcr0 or dcpu_cycstb_i)
-	case (dcr0[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
+always @(dcr0 or dcpu_cycstb_i or dcpu_we_i)
+	case (dcr0[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case		
 		3'b000:	match_cond0_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond0_stb = 1'b1;		// insn fetch EA
-		default:match_cond0_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond0_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond0_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond0_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond0_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond0_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
@@ -1105,33 +1149,32 @@ always @(match_cond0_stb or dcr0 or dvr0
 		4'b1_000,
 		4'b1_111: match0 = 1'b0;
 		4'b1_001: match0 =
-			((match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]) ==
-			(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]));
+			(match_cond0_ct == dvr0);
 		4'b1_010: match0 = 
-			((match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]) <
-			(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]));
+			({(match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]), match_cond0_ct[30:0]} <
+			 {(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]), dvr0[30:0]} );
 		4'b1_011: match0 = 
-			((match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]) <=
-			(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]));
+			({(match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]), match_cond0_ct[30:0]} <=
+			 {(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]), dvr0[30:0]} );
 		4'b1_100: match0 = 
-			((match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]) >
-			(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]));
+			({(match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]), match_cond0_ct[30:0]} >
+			 {(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]), dvr0[30:0]} );
 		4'b1_101: match0 = 
-			((match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]) >=
-			(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]));
+			({(match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]), match_cond0_ct[30:0]} >=
+			 {(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]), dvr0[30:0]} );
 		4'b1_110: match0 = 
-			((match_cond0_ct[31] ^ dcr0[`OR1200_DU_DCR_SC]) !=
-			(dvr0[31] ^ dcr0[`OR1200_DU_DCR_SC]));
+			(match_cond0_ct != dvr0);
 	endcase
 
+
 //
 // Watchpoint 0
 //
-always @(dmr1 or match0)
+always @(dmr1 or match0 or dbg_ewt_i)
 	case (dmr1[`OR1200_DU_DMR1_CW0])
 		2'b00: wp[0] = match0;
-		2'b01: wp[0] = match0;
-		2'b10: wp[0] = match0;
+		2'b01: wp[0] = match0 &  dbg_ewt_i;
+		2'b10: wp[0] = match0 |  dbg_ewt_i;
 		2'b11: wp[0] = 1'b0;
 	endcase
 
@@ -1141,23 +1184,50 @@ always @(dmr1 or match0)
 always @(dcr1 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr1[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond1_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond1_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond1_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond1_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond1_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond1_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond1_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond1_tmp = id_pc;		// insn fetch EA
+		3'b010:	match_cond1_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond1_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond1_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond1_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond1_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond1_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses (Match Condition 1)
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR
+always @(match_cond1_tmp or dcr1 or dcpu_be_i)
+  case (dcr1[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond1_ct = { {24{dcr1[`OR1200_DU_DCR_SC] & match_cond1_tmp[31]}}, match_cond1_tmp[31:24]};
+        4'b0100: match_cond1_ct = { {24{dcr1[`OR1200_DU_DCR_SC] & match_cond1_tmp[23]}}, match_cond1_tmp[23:16]};
+        4'b0010: match_cond1_ct = { {24{dcr1[`OR1200_DU_DCR_SC] & match_cond1_tmp[15]}}, match_cond1_tmp[15:8]};
+        4'b0001: match_cond1_ct = { {24{dcr1[`OR1200_DU_DCR_SC] & match_cond1_tmp[7] }}, match_cond1_tmp[7:0]};
+        4'b1100: match_cond1_ct = { {16{dcr1[`OR1200_DU_DCR_SC] & match_cond1_tmp[31]}}, match_cond1_tmp[31:16]};
+        4'b0011: match_cond1_ct = { {16{dcr1[`OR1200_DU_DCR_SC] & match_cond1_tmp[15]}}, match_cond1_tmp[15:0]};
+        default: match_cond1_ct = match_cond1_tmp;
+      endcase
+    end
+    default: match_cond1_ct = match_cond1_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 1)
 //
-always @(dcr1 or dcpu_cycstb_i)
-	case (dcr1[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
+always @(dcr1 or dcpu_cycstb_i or dcpu_we_i)
+	case (dcr1[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case		
 		3'b000:	match_cond1_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond1_stb = 1'b1;		// insn fetch EA
-		default:match_cond1_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond1_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond1_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond1_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond1_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond1_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
@@ -1169,23 +1239,21 @@ always @(match_cond1_stb or dcr1 or dvr1
 		4'b1_000,
 		4'b1_111: match1 = 1'b0;
 		4'b1_001: match1 =
-			((match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]) ==
-			(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]));
+			(match_cond1_ct == dvr1);
 		4'b1_010: match1 = 
-			((match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]) <
-			(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]));
+			({(match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]), match_cond1_ct[30:0]} <
+			 {(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]), dvr1[30:0]} );
 		4'b1_011: match1 = 
-			((match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]) <=
-			(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]));
+			({(match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]), match_cond1_ct[30:0]} <=
+			 {(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]), dvr1[30:0]} );
 		4'b1_100: match1 = 
-			((match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]) >
-			(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]));
+			({(match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]), match_cond1_ct[30:0]} >
+			 {(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]), dvr1[30:0]} );
 		4'b1_101: match1 = 
-			((match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]) >=
-			(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]));
+			({(match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]), match_cond1_ct[30:0]} >=
+			 {(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]), dvr1[30:0]} );
 		4'b1_110: match1 = 
-			((match_cond1_ct[31] ^ dcr1[`OR1200_DU_DCR_SC]) !=
-			(dvr1[31] ^ dcr1[`OR1200_DU_DCR_SC]));
+			(match_cond1_ct != dvr1);
 	endcase
 
 //
@@ -1199,29 +1267,57 @@ always @(dmr1 or match1 or wp)
 		2'b11: wp[1] = 1'b0;
 	endcase
 
+
 //
 // Compare To What (Match Condition 2)
 //
 always @(dcr2 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr2[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond2_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond2_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond2_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond2_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond2_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond2_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond2_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond2_tmp = id_pc;		// insn fetch EA
+		3'b010:	match_cond2_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond2_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond2_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond2_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond2_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond2_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses (Match Condition 2)
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR
+always @(match_cond2_tmp or dcr2 or dcpu_be_i)
+  case (dcr2[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond2_ct = { {24{dcr2[`OR1200_DU_DCR_SC] & match_cond2_tmp[31]}}, match_cond2_tmp[31:24]};
+        4'b0100: match_cond2_ct = { {24{dcr2[`OR1200_DU_DCR_SC] & match_cond2_tmp[23]}}, match_cond2_tmp[23:16]};
+        4'b0010: match_cond2_ct = { {24{dcr2[`OR1200_DU_DCR_SC] & match_cond2_tmp[15]}}, match_cond2_tmp[15:8]};
+        4'b0001: match_cond2_ct = { {24{dcr2[`OR1200_DU_DCR_SC] & match_cond2_tmp[7] }}, match_cond2_tmp[7:0]};
+        4'b1100: match_cond2_ct = { {16{dcr2[`OR1200_DU_DCR_SC] & match_cond2_tmp[31]}}, match_cond2_tmp[31:16]};
+        4'b0011: match_cond2_ct = { {16{dcr2[`OR1200_DU_DCR_SC] & match_cond2_tmp[15]}}, match_cond2_tmp[15:0]};
+        default: match_cond2_ct = match_cond2_tmp;
+      endcase
+    end
+    default: match_cond2_ct = match_cond2_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 2)
 //
-always @(dcr2 or dcpu_cycstb_i)
-	case (dcr2[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
+always @(dcr2 or dcpu_cycstb_i or dcpu_we_i)
+	case (dcr2[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case		
 		3'b000:	match_cond2_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond2_stb = 1'b1;		// insn fetch EA
-		default:match_cond2_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond2_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond2_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond2_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond2_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond2_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
@@ -1233,23 +1329,21 @@ always @(match_cond2_stb or dcr2 or dvr2
 		4'b1_000,
 		4'b1_111: match2 = 1'b0;
 		4'b1_001: match2 =
-			((match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]) ==
-			(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]));
+			(match_cond2_ct == dvr2);
 		4'b1_010: match2 = 
-			((match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]) <
-			(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]));
+			({(match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]), match_cond2_ct[30:0]} <
+			 {(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]), dvr2[30:0]} );
 		4'b1_011: match2 = 
-			((match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]) <=
-			(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]));
+			({(match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]), match_cond2_ct[30:0]} <=
+			 {(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]), dvr2[30:0]} );
 		4'b1_100: match2 = 
-			((match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]) >
-			(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]));
+			({(match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]), match_cond2_ct[30:0]} >
+			 {(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]), dvr2[30:0]} );
 		4'b1_101: match2 = 
-			((match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]) >=
-			(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]));
+			({(match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]), match_cond2_ct[30:0]} >=
+			 {(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]), dvr2[30:0]} );
 		4'b1_110: match2 = 
-			((match_cond2_ct[31] ^ dcr2[`OR1200_DU_DCR_SC]) !=
-			(dvr2[31] ^ dcr2[`OR1200_DU_DCR_SC]));
+			(match_cond2_ct != dvr2);
 	endcase
 
 //
@@ -1263,29 +1357,57 @@ always @(dmr1 or match2 or wp)
 		2'b11: wp[2] = 1'b0;
 	endcase
 
+
 //
 // Compare To What (Match Condition 3)
 //
 always @(dcr3 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr3[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond3_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond3_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond3_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond3_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond3_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond3_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond3_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond3_tmp = id_pc;		// insn fetch EA
+		3'b010:	match_cond3_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond3_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond3_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond3_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond3_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond3_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses (Match Condition 3)
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR
+always @(match_cond3_tmp or dcr3 or dcpu_be_i)
+  case (dcr3[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond3_ct = { {24{dcr3[`OR1200_DU_DCR_SC] & match_cond3_tmp[31]}}, match_cond3_tmp[31:24]};
+        4'b0100: match_cond3_ct = { {24{dcr3[`OR1200_DU_DCR_SC] & match_cond3_tmp[23]}}, match_cond3_tmp[23:16]};
+        4'b0010: match_cond3_ct = { {24{dcr3[`OR1200_DU_DCR_SC] & match_cond3_tmp[15]}}, match_cond3_tmp[15:8]};
+        4'b0001: match_cond3_ct = { {24{dcr3[`OR1200_DU_DCR_SC] & match_cond3_tmp[7] }}, match_cond3_tmp[7:0]};
+        4'b1100: match_cond3_ct = { {16{dcr3[`OR1200_DU_DCR_SC] & match_cond3_tmp[31]}}, match_cond3_tmp[31:16]};
+        4'b0011: match_cond3_ct = { {16{dcr3[`OR1200_DU_DCR_SC] & match_cond3_tmp[15]}}, match_cond3_tmp[15:0]};
+        default: match_cond3_ct = match_cond3_tmp;
+      endcase
+    end
+    default: match_cond3_ct = match_cond3_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 3)
 //
-always @(dcr3 or dcpu_cycstb_i)
-	case (dcr3[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
+always @(dcr3 or dcpu_cycstb_i or dcpu_we_i)
+	case (dcr3[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case		
 		3'b000:	match_cond3_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond3_stb = 1'b1;		// insn fetch EA
-		default:match_cond3_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond3_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond3_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond3_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond3_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond3_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
@@ -1297,23 +1419,21 @@ always @(match_cond3_stb or dcr3 or dvr3
 		4'b1_000,
 		4'b1_111: match3 = 1'b0;
 		4'b1_001: match3 =
-			((match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]) ==
-			(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]));
+			(match_cond3_ct == dvr3);
 		4'b1_010: match3 = 
-			((match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]) <
-			(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]));
+			({(match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]), match_cond3_ct[30:0]} <
+			 {(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]), dvr3[30:0]} );
 		4'b1_011: match3 = 
-			((match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]) <=
-			(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]));
+			({(match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]), match_cond3_ct[30:0]} <=
+			 {(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]), dvr3[30:0]} );
 		4'b1_100: match3 = 
-			((match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]) >
-			(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]));
+			({(match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]), match_cond3_ct[30:0]} >
+			 {(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]), dvr3[30:0]} );
 		4'b1_101: match3 = 
-			((match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]) >=
-			(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]));
+			({(match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]), match_cond3_ct[30:0]} >=
+			 {(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]), dvr3[30:0]} );
 		4'b1_110: match3 = 
-			((match_cond3_ct[31] ^ dcr3[`OR1200_DU_DCR_SC]) !=
-			(dvr3[31] ^ dcr3[`OR1200_DU_DCR_SC]));
+			(match_cond3_ct != dvr3);
 	endcase
 
 //
@@ -1327,29 +1447,57 @@ always @(dmr1 or match3 or wp)
 		2'b11: wp[3] = 1'b0;
 	endcase
 
+
 //
 // Compare To What (Match Condition 4)
 //
 always @(dcr4 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr4[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond4_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond4_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond4_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond4_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond4_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond4_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond4_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond4_tmp = id_pc;		// insn fetch EA
+		3'b010:	match_cond4_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond4_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond4_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond4_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond4_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond4_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses (Match Condition 4)
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR
+always @(match_cond4_tmp or dcr4 or dcpu_be_i)
+  case (dcr4[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond4_ct = { {24{dcr4[`OR1200_DU_DCR_SC] & match_cond4_tmp[31]}}, match_cond4_tmp[31:24]};
+        4'b0100: match_cond4_ct = { {24{dcr4[`OR1200_DU_DCR_SC] & match_cond4_tmp[23]}}, match_cond4_tmp[23:16]};
+        4'b0010: match_cond4_ct = { {24{dcr4[`OR1200_DU_DCR_SC] & match_cond4_tmp[15]}}, match_cond4_tmp[15:8]};
+        4'b0001: match_cond4_ct = { {24{dcr4[`OR1200_DU_DCR_SC] & match_cond4_tmp[7] }}, match_cond4_tmp[7:0]};
+        4'b1100: match_cond4_ct = { {16{dcr4[`OR1200_DU_DCR_SC] & match_cond4_tmp[31]}}, match_cond4_tmp[31:16]};
+        4'b0011: match_cond4_ct = { {16{dcr4[`OR1200_DU_DCR_SC] & match_cond4_tmp[15]}}, match_cond4_tmp[15:0]};
+        default: match_cond4_ct = match_cond4_tmp;
+      endcase
+    end
+    default: match_cond4_ct = match_cond4_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 4)
 //
-always @(dcr4 or dcpu_cycstb_i)
-	case (dcr4[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
+always @(dcr4 or dcpu_cycstb_i or dcpu_we_i)
+	case (dcr4[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case		
 		3'b000:	match_cond4_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond4_stb = 1'b1;		// insn fetch EA
-		default:match_cond4_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond4_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond4_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond4_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond4_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond4_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
@@ -1361,23 +1509,21 @@ always @(match_cond4_stb or dcr4 or dvr4
 		4'b1_000,
 		4'b1_111: match4 = 1'b0;
 		4'b1_001: match4 =
-			((match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]) ==
-			(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]));
+			(match_cond4_ct == dvr4);
 		4'b1_010: match4 = 
-			((match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]) <
-			(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]));
+			({(match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]), match_cond4_ct[30:0]} <
+			 {(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]), dvr4[30:0]} );
 		4'b1_011: match4 = 
-			((match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]) <=
-			(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]));
+			({(match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]), match_cond4_ct[30:0]} <=
+			 {(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]), dvr4[30:0]} );
 		4'b1_100: match4 = 
-			((match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]) >
-			(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]));
+			({(match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]), match_cond4_ct[30:0]} >
+			 {(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]), dvr4[30:0]} );
 		4'b1_101: match4 = 
-			((match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]) >=
-			(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]));
+			({(match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]), match_cond4_ct[30:0]} >=
+			 {(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]), dvr4[30:0]} );
 		4'b1_110: match4 = 
-			((match_cond4_ct[31] ^ dcr4[`OR1200_DU_DCR_SC]) !=
-			(dvr4[31] ^ dcr4[`OR1200_DU_DCR_SC]));
+			(match_cond4_ct != dvr4);
 	endcase
 
 //
@@ -1391,29 +1537,57 @@ always @(dmr1 or match4 or wp)
 		2'b11: wp[4] = 1'b0;
 	endcase
 
+
 //
 // Compare To What (Match Condition 5)
 //
 always @(dcr5 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr5[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond5_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond5_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond5_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond5_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond5_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond5_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond5_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond5_tmp = id_pc;		// insn fetch EA
+		3'b010:	match_cond5_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond5_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond5_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond5_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond5_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond5_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses (Match Condition 5)
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR
+always @(match_cond5_tmp or dcr5 or dcpu_be_i)
+  case (dcr5[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond5_ct = { {24{dcr5[`OR1200_DU_DCR_SC] & match_cond5_tmp[31]}}, match_cond5_tmp[31:24]};
+        4'b0100: match_cond5_ct = { {24{dcr5[`OR1200_DU_DCR_SC] & match_cond5_tmp[23]}}, match_cond5_tmp[23:16]};
+        4'b0010: match_cond5_ct = { {24{dcr5[`OR1200_DU_DCR_SC] & match_cond5_tmp[15]}}, match_cond5_tmp[15:8]};
+        4'b0001: match_cond5_ct = { {24{dcr5[`OR1200_DU_DCR_SC] & match_cond5_tmp[7] }}, match_cond5_tmp[7:0]};
+        4'b1100: match_cond5_ct = { {16{dcr5[`OR1200_DU_DCR_SC] & match_cond5_tmp[31]}}, match_cond5_tmp[31:16]};
+        4'b0011: match_cond5_ct = { {16{dcr5[`OR1200_DU_DCR_SC] & match_cond5_tmp[15]}}, match_cond5_tmp[15:0]};
+        default: match_cond5_ct = match_cond5_tmp;
+      endcase
+    end
+    default: match_cond5_ct = match_cond5_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 5)
 //
-always @(dcr5 or dcpu_cycstb_i)
-	case (dcr5[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
+always @(dcr5 or dcpu_cycstb_i or dcpu_we_i)
+	case (dcr5[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case		
 		3'b000:	match_cond5_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond5_stb = 1'b1;		// insn fetch EA
-		default:match_cond5_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond5_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond5_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond5_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond5_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond5_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
@@ -1425,23 +1599,21 @@ always @(match_cond5_stb or dcr5 or dvr5
 		4'b1_000,
 		4'b1_111: match5 = 1'b0;
 		4'b1_001: match5 =
-			((match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]) ==
-			(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]));
+			(match_cond5_ct == dvr5);
 		4'b1_010: match5 = 
-			((match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]) <
-			(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]));
+			({(match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]), match_cond5_ct[30:0]} <
+			 {(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]), dvr5[30:0]} );
 		4'b1_011: match5 = 
-			((match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]) <=
-			(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]));
+			({(match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]), match_cond5_ct[30:0]} <=
+			 {(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]), dvr5[30:0]} );
 		4'b1_100: match5 = 
-			((match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]) >
-			(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]));
+			({(match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]), match_cond5_ct[30:0]} >
+			 {(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]), dvr5[30:0]} );
 		4'b1_101: match5 = 
-			((match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]) >=
-			(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]));
+			({(match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]), match_cond5_ct[30:0]} >=
+			 {(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]), dvr5[30:0]} );
 		4'b1_110: match5 = 
-			((match_cond5_ct[31] ^ dcr5[`OR1200_DU_DCR_SC]) !=
-			(dvr5[31] ^ dcr5[`OR1200_DU_DCR_SC]));
+			(match_cond5_ct != dvr5);
 	endcase
 
 //
@@ -1455,29 +1627,57 @@ always @(dmr1 or match5 or wp)
 		2'b11: wp[5] = 1'b0;
 	endcase
 
+
 //
 // Compare To What (Match Condition 6)
 //
 always @(dcr6 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr6[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond6_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond6_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond6_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond6_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond6_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond6_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond6_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond6_tmp = id_pc;		// insn fetch EA
+		3'b010:	match_cond6_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond6_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond6_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond6_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond6_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond6_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses:
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR
+always @(match_cond6_tmp or dcr6 or dcpu_be_i)
+  case (dcr6[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond6_ct = { {24{dcr6[`OR1200_DU_DCR_SC] & match_cond6_tmp[31]}}, match_cond6_tmp[31:24]};
+        4'b0100: match_cond6_ct = { {24{dcr6[`OR1200_DU_DCR_SC] & match_cond6_tmp[23]}}, match_cond6_tmp[23:16]};
+        4'b0010: match_cond6_ct = { {24{dcr6[`OR1200_DU_DCR_SC] & match_cond6_tmp[15]}}, match_cond6_tmp[15:8]};
+        4'b0001: match_cond6_ct = { {24{dcr6[`OR1200_DU_DCR_SC] & match_cond6_tmp[7] }}, match_cond6_tmp[7:0]};
+        4'b1100: match_cond6_ct = { {16{dcr6[`OR1200_DU_DCR_SC] & match_cond6_tmp[31]}}, match_cond6_tmp[31:16]};
+        4'b0011: match_cond6_ct = { {16{dcr6[`OR1200_DU_DCR_SC] & match_cond6_tmp[15]}}, match_cond6_tmp[15:0]};
+        default: match_cond6_ct = match_cond6_tmp;
+      endcase
+    end
+    default: match_cond6_ct = match_cond6_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 6)
 //
-always @(dcr6 or dcpu_cycstb_i)
-	case (dcr6[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
+always @(dcr6 or dcpu_cycstb_i or dcpu_we_i)
+	case (dcr6[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case		
 		3'b000:	match_cond6_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond6_stb = 1'b1;		// insn fetch EA
-		default:match_cond6_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond6_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond6_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond6_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond6_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond6_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
@@ -1489,23 +1689,21 @@ always @(match_cond6_stb or dcr6 or dvr6
 		4'b1_000,
 		4'b1_111: match6 = 1'b0;
 		4'b1_001: match6 =
-			((match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]) ==
-			(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]));
+			(match_cond6_ct == dvr6);
 		4'b1_010: match6 = 
-			((match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]) <
-			(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]));
+			({(match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]), match_cond6_ct[30:0]} <
+			 {(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]), dvr6[30:0]} );
 		4'b1_011: match6 = 
-			((match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]) <=
-			(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]));
+			({(match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]), match_cond6_ct[30:0]} <=
+			 {(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]), dvr6[30:0]} );
 		4'b1_100: match6 = 
-			((match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]) >
-			(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]));
+			({(match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]), match_cond6_ct[30:0]} >
+			 {(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]), dvr6[30:0]} );
 		4'b1_101: match6 = 
-			((match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]) >=
-			(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]));
+			({(match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]), match_cond6_ct[30:0]} >=
+			 {(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]), dvr6[30:0]} );
 		4'b1_110: match6 = 
-			((match_cond6_ct[31] ^ dcr6[`OR1200_DU_DCR_SC]) !=
-			(dvr6[31] ^ dcr6[`OR1200_DU_DCR_SC]));
+			(match_cond6_ct != dvr6);
 	endcase
 
 //
@@ -1525,27 +1723,58 @@ always @(dmr1 or match6 or wp)
 always @(dcr7 or id_pc or dcpu_adr_i or dcpu_dat_dc
 	or dcpu_dat_lsu or dcpu_we_i)
 	case (dcr7[`OR1200_DU_DCR_CT])		// synopsys parallel_case
-		3'b001:	match_cond7_ct = id_pc;		// insn fetch EA
-		3'b010:	match_cond7_ct = dcpu_adr_i;	// load EA
-		3'b011:	match_cond7_ct = dcpu_adr_i;	// store EA
-		3'b100:	match_cond7_ct = dcpu_dat_dc;	// load data
-		3'b101:	match_cond7_ct = dcpu_dat_lsu;	// store data
-		3'b110:	match_cond7_ct = dcpu_adr_i;	// load/store EA
-		default:match_cond7_ct = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
-	endcase
+		3'b001:	match_cond7_tmp = id_pc;		// insn fetch EA -- *** use spr_dat_npc?? ***
+		3'b010:	match_cond7_tmp = dcpu_adr_i;	// load EA
+		3'b011:	match_cond7_tmp = dcpu_adr_i;	// store EA
+		3'b100:	match_cond7_tmp = dcpu_dat_dc;	// load data
+		3'b101:	match_cond7_tmp = dcpu_dat_lsu;	// store data
+		3'b110:	match_cond7_tmp = dcpu_adr_i;	// load/store EA
+		default:match_cond7_tmp = dcpu_we_i ? dcpu_dat_lsu : dcpu_dat_dc;
+	endcase
+
+// Transparently handle 8/16/32 bit bus accesses:
+// For addresses, leave unchanged
+// for 32-bit data, leave unchanged
+// for 8- or 16-bit data, move the active byte lane(s) to the LSB position
+// This will allow the value to be compared to the LSB(s) of the DVR.
+// If we're doing a signed compare (DCR_SC is set), we sign-extend.  If not, zero-pad.
+// This means that for a signed comparison, the DVR must ALWAYS be a 32-bit signed
+// number, even if only doing on 8-bit compare!
+always @(match_cond7_tmp or dcr7 or dcpu_be_i)
+  case (dcr7[`OR1200_DU_DCR_CT])		// synopsys parallel_case
+    3'b100,
+    3'b101,
+    3'b111:  begin // We're comparing to data
+      case (dcpu_be_i)
+        4'b1000: match_cond7_ct = { {24{dcr7[`OR1200_DU_DCR_SC] & match_cond7_tmp[31]}}, match_cond7_tmp[31:24]};
+        4'b0100: match_cond7_ct = { {24{dcr7[`OR1200_DU_DCR_SC] & match_cond7_tmp[23]}}, match_cond7_tmp[23:16]};
+        4'b0010: match_cond7_ct = { {24{dcr7[`OR1200_DU_DCR_SC] & match_cond7_tmp[15]}}, match_cond7_tmp[15:8]};
+        4'b0001: match_cond7_ct = { {24{dcr7[`OR1200_DU_DCR_SC] & match_cond7_tmp[7] }}, match_cond7_tmp[7:0]};
+        4'b1100: match_cond7_ct = { {16{dcr7[`OR1200_DU_DCR_SC] & match_cond7_tmp[31]}}, match_cond7_tmp[31:16]};
+        4'b0011: match_cond7_ct = { {16{dcr7[`OR1200_DU_DCR_SC] & match_cond7_tmp[15]}}, match_cond7_tmp[15:0]};
+        default: match_cond7_ct = match_cond7_tmp;
+      endcase
+    end
+    default: match_cond7_ct = match_cond7_tmp;  // We're comparing an address
+  endcase
 
 //
 // When To Compare (Match Condition 7)
 //
-always @(dcr7 or dcpu_cycstb_i)
+always @(dcr7 or dcpu_cycstb_i or dcpu_we_i)
 	case (dcr7[`OR1200_DU_DCR_CT]) 		// synopsys parallel_case
 		3'b000:	match_cond7_stb = 1'b0;		//comparison disabled
 		3'b001:	match_cond7_stb = 1'b1;		// insn fetch EA
-		default:match_cond7_stb = dcpu_cycstb_i; // any load/store
+		3'b010: match_cond7_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load addr
+		3'b011: match_cond7_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store addr
+		3'b100: match_cond7_stb = (dcpu_cycstb_i & (~dcpu_we_i));  // data load val
+		3'b101: match_cond7_stb = (dcpu_cycstb_i & dcpu_we_i);     // data store val
+		default: match_cond7_stb = dcpu_cycstb_i; // any load/store
 	endcase
 
 //
 // Match Condition 7
+// To do a signed comparison, we invert the MSB then do an unsigned comparison.
 //
 always @(match_cond7_stb or dcr7 or dvr7 or match_cond7_ct)
 	casex ({match_cond7_stb, dcr7[`OR1200_DU_DCR_CC]})
@@ -1553,23 +1782,21 @@ always @(match_cond7_stb or dcr7 or dvr7
 		4'b1_000,
 		4'b1_111: match7 = 1'b0;
 		4'b1_001: match7 =
-			((match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]) ==
-			(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]));
+			(match_cond7_ct == dvr7);
 		4'b1_010: match7 = 
-			((match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]) <
-			(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]));
+			({(match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]), match_cond7_ct[30:0]} <
+			 {(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]), dvr7[30:0]} );
 		4'b1_011: match7 = 
-			((match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]) <=
-			(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]));
+			({(match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]), match_cond7_ct[30:0]} <=
+			 {(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]), dvr7[30:0]} );
 		4'b1_100: match7 = 
-			((match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]) >
-			(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]));
+			({(match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]), match_cond7_ct[30:0]} >
+			 {(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]), dvr7[30:0]} );
 		4'b1_101: match7 = 
-			((match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]) >=
-			(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]));
+			({(match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]), match_cond7_ct[30:0]} >=
+			 {(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]), dvr7[30:0]} );
 		4'b1_110: match7 = 
-			((match_cond7_ct[31] ^ dcr7[`OR1200_DU_DCR_SC]) !=
-			(dvr7[31] ^ dcr7[`OR1200_DU_DCR_SC]));
+			(match_cond7_ct != dvr7);
 	endcase
 
 //
@@ -1586,11 +1813,19 @@ always @(dmr1 or match7 or wp)
 //
 // Increment Watchpoint Counter 0
 //
-always @(wp or dmr2)
-	if (dmr2[`OR1200_DU_DMR2_WCE0])
-		incr_wpcntr0 = |(wp & ~dmr2[`OR1200_DU_DMR2_AWTC]);
-	else
-		incr_wpcntr0 = 1'b0;
+
+// A watchpoint may hold it's wp bit high for >1 clock while ex_freeze
+// is high, but drop it when ex_freeze is low.  So, increment on wp will over-increment,
+// but AND'ing with ex_freeze will never increment.  Solution:  hold the wp when set,
+// inc the counter only when ex_freeze is false.
+always @ (posedge clk)
+begin
+  if(rst) incr_wpcntr0_latched <= 1'b0;
+  else if(ex_freeze & (|(wp & ~dmr2[`OR1200_DU_DMR2_AWTC]))) incr_wpcntr0_latched <= 1'b1;
+  else if(~ex_freeze) incr_wpcntr0_latched <= 1'b0; 
+end
+
+assign incr_wpcntr0 = dmr2[`OR1200_DU_DMR2_WCE0] & (~ex_freeze & (incr_wpcntr0_latched | (|(wp & ~dmr2[`OR1200_DU_DMR2_AWTC]))));
 
 //
 // Match Condition Watchpoint Counter 0
@@ -1601,15 +1836,35 @@ always @(dwcr0)
 	else
 		wpcntr0_match = 1'b0;
 
+//
+// Breakpoint Triggering - Counter 1
+// While the standard watchpoint hardware won't give a match for more than one
+// clock cycle, the counters will give a constant match.  This will be registered,
+// causing a second trap condition after a continue.  To fix this, just pulse the
+// break output high for 1 clock cycle, and don't do it again until the match
+// condition has been negated for at least 1 clock cycle.  The new break output
+// is called wpcntrX_oneshot.
+//
+always @ (posedge clk)
+begin
+	if(wpcntr0_match & wpcntr0_armed) wpcntr0_oneshot = 1'b1;
+	else wpcntr0_oneshot = 1'b0;
+end
+
+always @(posedge clk)
+begin
+	if(wpcntr0_match) wpcntr0_armed = 1'b0;
+	else wpcntr0_armed = 1'b1;
+end
 
 //
-// Watchpoint 8
+// Watchpoint 8 (Counter 0)
 //
-always @(dmr1 or wpcntr0_match or wp)
+always @(dmr1 or wpcntr0_oneshot or wp)
 	case (dmr1[`OR1200_DU_DMR1_CW8])
-		2'b00: wp[8] = wpcntr0_match;
-		2'b01: wp[8] = wpcntr0_match & wp[7];
-		2'b10: wp[8] = wpcntr0_match | wp[7];
+		2'b00: wp[8] = wpcntr0_oneshot;
+		2'b01: wp[8] = wpcntr0_oneshot & wp[3];
+		2'b10: wp[8] = wpcntr0_oneshot | wp[3];
 		2'b11: wp[8] = 1'b0;
 	endcase
 
@@ -1617,11 +1872,18 @@ always @(dmr1 or wpcntr0_match or wp)
 //
 // Increment Watchpoint Counter 1
 //
-always @(wp or dmr2)
-	if (dmr2[`OR1200_DU_DMR2_WCE1])
-		incr_wpcntr1 = |(wp & dmr2[`OR1200_DU_DMR2_AWTC]);
-	else
-		incr_wpcntr1 = 1'b0;
+// A watchpoint may hold it's wp bit high for >1 clock while ex_freeze
+// is high, but drop it when ex_freeze is low.  So, increment on wp will over-increment,
+// but AND'ing with ex_freeze will never increment.  Solution:  hold the wp when set,
+// inc the counter only when ex_freeze is false.
+always @ (posedge clk)
+begin
+  if(rst) incr_wpcntr1_latched <= 1'b0;
+  else if(ex_freeze & (|(wp & dmr2[`OR1200_DU_DMR2_AWTC]))) incr_wpcntr1_latched <= 1'b1;
+  else if(~ex_freeze) incr_wpcntr1_latched <= 1'b0; 
+end
+
+assign incr_wpcntr1 = dmr2[`OR1200_DU_DMR2_WCE1] & (~ex_freeze & (incr_wpcntr1_latched | (|(wp & dmr2[`OR1200_DU_DMR2_AWTC]))));
 
 //
 // Match Condition Watchpoint Counter 1
@@ -1633,36 +1895,70 @@ always @(dwcr1)
 		wpcntr1_match = 1'b0;
 
 //
-// Watchpoint 9
-//
-always @(dmr1 or wpcntr1_match or wp)
-	case (dmr1[`OR1200_DU_DMR1_CW9])
-		2'b00: wp[9] = wpcntr1_match;
-		2'b01: wp[9] = wpcntr1_match & wp[8];
-		2'b10: wp[9] = wpcntr1_match | wp[8];
-		2'b11: wp[9] = 1'b0;
-	endcase
+// Breakpoint Triggering - Counter 1
+// While the standard watchpoint hardware won't give a match for more than one
+// clock cycle, the counters will give a constant match.  This will be registered,
+// causing a second trap condition after a continue.  To fix this, just pulse the
+// break output high for 1 clock cycle, and don't do it again until the match
+// condition has been negated for at least 1 clock cycle.  The new break output
+// is called wpcntrX_oneshot.
+//
+always @ (posedge clk)
+begin
+	if(wpcntr1_match & wpcntr1_armed) wpcntr1_oneshot = 1'b1;
+	else wpcntr1_oneshot = 1'b0;
+end
+
+always @(posedge clk)
+begin
+	if(wpcntr1_match) wpcntr1_armed = 1'b0;
+	else wpcntr1_armed = 1'b1;
+end
 
 //
-// Watchpoint 10
+// Watchpoint 9 (Counter 1)
 //
-always @(dmr1 or dbg_ewt_i or wp)
-	case (dmr1[`OR1200_DU_DMR1_CW10])
-		2'b00: wp[10] = dbg_ewt_i;
-		2'b01: wp[10] = dbg_ewt_i & wp[9];
-		2'b10: wp[10] = dbg_ewt_i | wp[9];
-		2'b11: wp[10] = 1'b0;
+always @(dmr1 or wpcntr1_oneshot or wp)
+	case (dmr1[`OR1200_DU_DMR1_CW9])
+		2'b00: wp[9] = wpcntr1_oneshot;
+		2'b01: wp[9] = wpcntr1_oneshot & wp[7];
+		2'b10: wp[9] = wpcntr1_oneshot | wp[7];
+		2'b11: wp[9] = 1'b0;
 	endcase
 
 `endif
 
+   
 //
 // Watchpoints can cause trap exception
 //
 `ifdef OR1200_DU_HWBKPTS
-assign du_hwbkpt = |(wp & dmr2[`OR1200_DU_DMR2_WGB]);
+
+// We must hold the du_hwbkpt signal high until it's noticed by the execution unit,
+// which means until the 'freeze' signal goes inactive.
+
+always @ (posedge clk)
+begin
+  if(rst) du_hwbkpt_latched <= 1'b0;
+  else if(ex_freeze & (|(wp & dmr2[`OR1200_DU_DMR2_WGB]))) du_hwbkpt_latched <= 1'b1;
+  else if(~ex_freeze) du_hwbkpt_latched <= 1'b0; 
+end
+
+assign du_hwbkpt = du_hwbkpt_latched | (|(wp & dmr2[`OR1200_DU_DMR2_WGB]));
+
+  `ifdef OR1200_DU_DMR2
+// Spec doesn't state what resets the WGB bits in DMR2.
+// This implementation resets on any write to the DMR2.
+always @ (posedge clk)
+begin
+	if(rst | (dmr2_sel & spr_write)) wp_latched <= 10'h000;
+	else if((|(wp & dmr2[`OR1200_DU_DMR2_WGB]))/*du_hwbkpt*/ & !(|wp_latched)) wp_latched <= (wp & dmr2[`OR1200_DU_DMR2_WGB]);
+end
+  `endif
+
 `else
 assign du_hwbkpt = 1'b0;
+assign wp_latched = 10'h000;
 `endif
 
 `ifdef OR1200_DU_TB_IMPLEMENTED
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.