Subversion Repositories mips_enhanced

`timescale 1ns / 10ps
 
/////////////////////////////////////////////////////////////////////
////                                                             ////
////  SPI Slave Model                                            ////
////                                                             ////
////  Authors: Richard Herveille (richard@asics.ws) www.asics.ws ////
////                                                             ////
////  http://www.opencores.org/projects/simple_spi/              ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2004 Richard Herveille                        ////
////                         richard@asics.ws                    ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
 
//  CVS Log
//
//  $Id: spi_slave_model.v,v 1.2 2006/11/20 17:22:05 tame Exp $
//
//  $Date: 2006/11/20 17:22:05 $
//  $Revision: 1.2 $
//  $Author: tame $
//  $Locker:  $
//  $State: Exp $
//
// Change History:
//               $Log: spi_slave_model.v,v $
//               Revision 1.2  2006/11/20 17:22:05  tame
//               Added seperate read address so that valid data from previousl write address is sent
//               automatically.
//
//               Revision 1.1  2006/11/14 16:34:07  tame
//               Added testbench. Simulation running.
//
//               Revision 1.1  2006/11/10 14:47:52  chu
//               initial definition
//
//               Revision 1.1  2004/02/28 16:01:47  rherveille
//               Initial testbench release added
//
//
//
//
 
 
// Requires: Verilog2001
 
// `include "timescale.v"
 
module spi_slave_model (
	input  wire csn,
	input  wire sck,
	input  wire di,
	output wire do
);
 
	//
	// Variable declaration
	//
	wire debug = 1'b1;
 
	wire cpol = 1'b0;
	wire cpha  = 1'b0;
 
	reg [7:0] mem [7:0]; // initiate memory
	reg [2:0] mem_adr;   // memory address
	reg [7:0] mem_do;    // memory data output
 
	reg [7:0] sri, sro;  // 8bit shift register
 
	reg [2:0] bit_cnt;
	reg       ld;
 
	wire clk;
 
    // slave shall automatically send what has been
    // written previously
    wire [2:0] mem_adr_read;
    assign mem_adr_read = mem_adr - 1;
 
	integer ID=99;
 
	// module body
	//
 
	assign clk = cpol ^ cpha ^ sck;
 
	// generate shift registers
	always @(posedge clk)
	  sri <= #1 {sri[6:0],di};
 
	always @(posedge clk)
	  if (&bit_cnt)
	 	    sro <= #1 mem[mem_adr_read];
	  else
	    sro <= #1 {sro[6:0],1'bx};
 
	assign do = csn==0 ? sro[7] : 1'bz;
 
	//generate bit-counter
	always @(posedge clk, posedge csn)
	  if(csn)
	    bit_cnt <= #1 3'b111;
	  else
	    bit_cnt <= #1 bit_cnt - 3'h1;
 
	//generate access done signal
        always @(posedge clk)
	  ld <= #1 ~(|bit_cnt);
 
	always @(negedge clk)
          if (ld) begin
	    mem[mem_adr] <= #1 sri;
	    mem_adr      <= #1 mem_adr + 1'b1;
		if (debug==1)
				$display("slave: received %8b", sri);
	  end
 
	initial
	begin
	  bit_cnt=3'b111;
	  mem_adr = 0;
	  sro = mem[mem_adr_read];
	end
	always @(negedge csn)
			if (csn==1'b0) $display("slave: my ID is %2d", ID);
 
endmodule