OpenCores
URL https://opencores.org/ocsvn/mpeg2fpga/mpeg2fpga/trunk

Subversion Repositories mpeg2fpga

[/] [mpeg2fpga/] [trunk/] [doc/] [ieee-1180-results] - Rev 2

Compare with Previous | Blame | View Log

IEEE test conditions: -L = -256, +H = 255, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0027   0.0043   0.0044   0.0030   0.0030   0.0045   0.0026   0.0044
   0.0033   0.0048   0.0032   0.0034   0.0032   0.0040   0.0048   0.0048
   0.0034   0.0034   0.0035   0.0037   0.0030   0.0044   0.0049   0.0030
   0.0034   0.0035   0.0037   0.0030   0.0034   0.0044   0.0040   0.0042
   0.0036   0.0035   0.0035   0.0032   0.0032   0.0032   0.0032   0.0047
   0.0034   0.0033   0.0039   0.0032   0.0041   0.0038   0.0045   0.0025
   0.0037   0.0034   0.0035   0.0043   0.0043   0.0030   0.0031   0.0030
   0.0031   0.0040   0.0037   0.0034   0.0039   0.0028   0.0036   0.0032
Worst pmse = 0.004900  (meets spec limit 0.06)
Overall mse = 0.003627  (meets spec limit 0.02)

Mean errors:
  -0.0005   0.0003   0.0008   0.0000   0.0006   0.0005   0.0006   0.0002
  -0.0001  -0.0004   0.0004   0.0006   0.0006   0.0004  -0.0002   0.0006
  -0.0014  -0.0002  -0.0003  -0.0005   0.0006  -0.0002   0.0011  -0.0002
  -0.0012   0.0003  -0.0001  -0.0006   0.0006   0.0002  -0.0006  -0.0002
   0.0002   0.0005   0.0001  -0.0002  -0.0004  -0.0008   0.0004   0.0005
   0.0000   0.0005   0.0011   0.0002  -0.0001  -0.0004   0.0003  -0.0005
   0.0007  -0.0010   0.0005  -0.0001  -0.0003  -0.0006  -0.0005   0.0000
   0.0005   0.0006   0.0001   0.0004  -0.0001  -0.0002   0.0002   0.0000
Worst mean error = 0.001400  (meets spec limit 0.015)
Overall mean error = 0.000052  (meets spec limit 0.0015)

0 elements of IDCT(0) were not zero


IEEE test conditions: -L = -5, +H = 5, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0032   0.0036   0.0028   0.0039   0.0030   0.0029   0.0027   0.0033
   0.0039   0.0029   0.0035   0.0032   0.0033   0.0034   0.0042   0.0038
   0.0027   0.0042   0.0025   0.0037   0.0027   0.0035   0.0029   0.0032
   0.0023   0.0025   0.0031   0.0037   0.0033   0.0032   0.0035   0.0040
   0.0029   0.0030   0.0041   0.0041   0.0028   0.0037   0.0046   0.0032
   0.0034   0.0029   0.0033   0.0024   0.0031   0.0026   0.0036   0.0016
   0.0044   0.0040   0.0029   0.0024   0.0034   0.0033   0.0038   0.0030
   0.0030   0.0029   0.0031   0.0028   0.0040   0.0045   0.0026   0.0042
Worst pmse = 0.004600  (meets spec limit 0.06)
Overall mse = 0.003284  (meets spec limit 0.02)

Mean errors:
  -0.0002   0.0008  -0.0004  -0.0001  -0.0008  -0.0003   0.0003  -0.0007
  -0.0005  -0.0001  -0.0001   0.0002  -0.0005   0.0006  -0.0012   0.0006
   0.0003   0.0012  -0.0003   0.0003   0.0003  -0.0007  -0.0001   0.0006
  -0.0005   0.0001   0.0001   0.0003  -0.0001   0.0008   0.0007  -0.0014
   0.0001   0.0008  -0.0007   0.0001  -0.0002   0.0005   0.0014   0.0002
   0.0002   0.0003   0.0001   0.0004  -0.0003   0.0002  -0.0006   0.0000
   0.0000  -0.0002   0.0005   0.0004  -0.0006  -0.0003  -0.0006   0.0008
   0.0006  -0.0001  -0.0001  -0.0008   0.0004   0.0007   0.0006  -0.0002
Worst mean error = 0.001400  (meets spec limit 0.015)
Overall mean error = 0.000044  (meets spec limit 0.0015)

0 elements of IDCT(0) were not zero


IEEE test conditions: -L = -300, +H = 300, sign = 1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0024   0.0039   0.0041   0.0033   0.0027   0.0036   0.0031   0.0034
   0.0032   0.0026   0.0026   0.0022   0.0028   0.0030   0.0030   0.0033
   0.0029   0.0016   0.0034   0.0023   0.0036   0.0042   0.0028   0.0042
   0.0031   0.0026   0.0024   0.0027   0.0032   0.0035   0.0025   0.0031
   0.0024   0.0029   0.0030   0.0026   0.0027   0.0034   0.0030   0.0036
   0.0028   0.0029   0.0037   0.0032   0.0032   0.0033   0.0023   0.0026
   0.0032   0.0020   0.0027   0.0039   0.0039   0.0029   0.0030   0.0031
   0.0030   0.0046   0.0030   0.0041   0.0026   0.0038   0.0026   0.0030
Worst pmse = 0.004600  (meets spec limit 0.06)
Overall mse = 0.003067  (meets spec limit 0.02)

Mean errors:
  -0.0010   0.0011  -0.0011   0.0003   0.0001  -0.0002  -0.0009  -0.0006
   0.0004   0.0000  -0.0004   0.0000   0.0002  -0.0004  -0.0002  -0.0009
  -0.0003  -0.0002   0.0000  -0.0005  -0.0002  -0.0002   0.0004   0.0004
   0.0001  -0.0010  -0.0004  -0.0003   0.0004   0.0001  -0.0005   0.0005
   0.0006   0.0003   0.0006  -0.0002   0.0003   0.0012  -0.0006  -0.0006
   0.0000  -0.0001   0.0015  -0.0012   0.0006  -0.0001   0.0001  -0.0002
   0.0004   0.0008  -0.0007   0.0003  -0.0013   0.0005   0.0008  -0.0009
  -0.0010  -0.0010   0.0008  -0.0003  -0.0006   0.0008   0.0012   0.0002
Worst mean error = 0.001500  (meets spec limit 0.015)
Overall mean error = -0.000048  (meets spec limit 0.0015)

0 elements of IDCT(0) were not zero


IEEE test conditions: -L = -256, +H = 255, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0027   0.0041   0.0044   0.0030   0.0029   0.0046   0.0026   0.0044
   0.0033   0.0049   0.0032   0.0034   0.0032   0.0040   0.0048   0.0049
   0.0034   0.0034   0.0035   0.0037   0.0030   0.0045   0.0050   0.0030
   0.0035   0.0035   0.0037   0.0030   0.0034   0.0044   0.0039   0.0041
   0.0036   0.0037   0.0035   0.0033   0.0033   0.0032   0.0032   0.0047
   0.0034   0.0033   0.0039   0.0032   0.0041   0.0038   0.0045   0.0025
   0.0037   0.0034   0.0035   0.0043   0.0043   0.0030   0.0031   0.0030
   0.0031   0.0040   0.0037   0.0034   0.0039   0.0029   0.0035   0.0032
Worst pmse = 0.005000  (meets spec limit 0.06)
Overall mse = 0.003634  (meets spec limit 0.02)

Mean errors:
   0.0005  -0.0001  -0.0008   0.0000  -0.0005  -0.0004  -0.0006  -0.0002
   0.0001   0.0005  -0.0004  -0.0006  -0.0006  -0.0006   0.0002  -0.0005
   0.0014   0.0002   0.0003   0.0005  -0.0006   0.0001  -0.0010   0.0002
   0.0013  -0.0003   0.0001   0.0006  -0.0006  -0.0002   0.0007   0.0001
  -0.0002  -0.0003  -0.0001   0.0003   0.0003   0.0008  -0.0004  -0.0005
   0.0000  -0.0005  -0.0011  -0.0002   0.0001   0.0004  -0.0003   0.0005
  -0.0007   0.0010  -0.0005   0.0001   0.0003   0.0006   0.0005   0.0000
  -0.0005  -0.0006  -0.0001  -0.0004   0.0001   0.0001  -0.0003   0.0000
Worst mean error = 0.001400  (meets spec limit 0.015)
Overall mean error = -0.000044  (meets spec limit 0.0015)

0 elements of IDCT(0) were not zero


IEEE test conditions: -L = -5, +H = 5, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0032   0.0036   0.0028   0.0039   0.0030   0.0029   0.0026   0.0032
   0.0039   0.0030   0.0035   0.0032   0.0033   0.0034   0.0042   0.0038
   0.0027   0.0042   0.0025   0.0037   0.0027   0.0034   0.0029   0.0032
   0.0024   0.0025   0.0031   0.0036   0.0033   0.0031   0.0035   0.0040
   0.0030   0.0030   0.0041   0.0039   0.0028   0.0037   0.0045   0.0032
   0.0034   0.0029   0.0033   0.0023   0.0031   0.0026   0.0036   0.0017
   0.0044   0.0040   0.0029   0.0025   0.0034   0.0033   0.0038   0.0030
   0.0030   0.0029   0.0031   0.0028   0.0040   0.0045   0.0026   0.0042
Worst pmse = 0.004500  (meets spec limit 0.06)
Overall mse = 0.003278  (meets spec limit 0.02)

Mean errors:
   0.0002  -0.0008   0.0004   0.0001   0.0008   0.0003  -0.0002   0.0008
   0.0003   0.0002   0.0001  -0.0002   0.0005  -0.0006   0.0012  -0.0006
  -0.0003  -0.0012   0.0003  -0.0003  -0.0003   0.0008   0.0001  -0.0006
   0.0004  -0.0001  -0.0001  -0.0004   0.0001  -0.0007  -0.0007   0.0014
   0.0000  -0.0008   0.0007  -0.0001   0.0002  -0.0005  -0.0013  -0.0002
  -0.0002  -0.0003  -0.0001  -0.0003   0.0003  -0.0002   0.0006  -0.0001
   0.0000   0.0002  -0.0005  -0.0003   0.0006   0.0003   0.0006  -0.0008
  -0.0006   0.0001   0.0001   0.0006  -0.0004  -0.0007  -0.0006   0.0002
Worst mean error = 0.001400  (meets spec limit 0.015)
Overall mean error = -0.000041  (meets spec limit 0.0015)

0 elements of IDCT(0) were not zero


IEEE test conditions: -L = -300, +H = 300, sign = -1, #iters = 10000
Peak absolute values of errors:
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
   1   1   1   1   1   1   1   1
Worst peak error = 1  (meets spec limit 1)

Mean square errors:
   0.0025   0.0040   0.0042   0.0033   0.0027   0.0036   0.0031   0.0034
   0.0033   0.0027   0.0026   0.0022   0.0029   0.0030   0.0031   0.0033
   0.0029   0.0016   0.0035   0.0023   0.0037   0.0042   0.0027   0.0041
   0.0031   0.0026   0.0024   0.0028   0.0032   0.0034   0.0024   0.0031
   0.0023   0.0029   0.0030   0.0027   0.0027   0.0034   0.0030   0.0034
   0.0030   0.0029   0.0036   0.0032   0.0031   0.0034   0.0023   0.0026
   0.0033   0.0020   0.0028   0.0040   0.0039   0.0029   0.0030   0.0031
   0.0030   0.0045   0.0030   0.0041   0.0026   0.0037   0.0026   0.0030
Worst pmse = 0.004500  (meets spec limit 0.06)
Overall mse = 0.003077  (meets spec limit 0.02)

Mean errors:
   0.0011  -0.0010   0.0012  -0.0003  -0.0001   0.0002   0.0009   0.0006
  -0.0005  -0.0001   0.0004   0.0000  -0.0001   0.0004   0.0001   0.0009
   0.0003   0.0002  -0.0001   0.0005   0.0003   0.0002  -0.0003  -0.0003
  -0.0001   0.0010   0.0004   0.0002  -0.0004  -0.0002   0.0004  -0.0005
  -0.0007  -0.0003  -0.0006   0.0003  -0.0003  -0.0012   0.0006   0.0006
   0.0002   0.0001  -0.0016   0.0012  -0.0007   0.0002  -0.0001   0.0002
  -0.0003  -0.0008   0.0006  -0.0002   0.0013  -0.0005  -0.0008   0.0009
   0.0012   0.0011  -0.0008   0.0003   0.0006  -0.0009  -0.0012  -0.0002
Worst mean error = 0.001600  (meets spec limit 0.015)
Overall mean error = 0.000055  (meets spec limit 0.0015)

0 elements of IDCT(0) were not zero


Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.