Subversion Repositories mpmc8

`timescale 1ns / 1ps
// ============================================================================
//        __
//   \\__/ o\    (C) 2015-2022  Robert Finch, Waterloo
//    \  __ /    All rights reserved.
//     \/_//     robfinch<remove>@finitron.ca
//       ||
//
// BSD 3-Clause License
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this
//    list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice,
//    this list of conditions and the following disclaimer in the documentation
//    and/or other materials provided with the distribution.
//
// 3. Neither the name of the copyright holder nor the names of its
//    contributors may be used to endorse or promote products derived from
//    this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// ============================================================================
//
import mpmc10_pkg::*;

module mpmc10_state_machine_wb(rst, clk, to, rdy, wdf_rdy, fifo_empty, rd_fifo,
        rd_rst_busy, fifo_out, state,
        num_strips, req_strip_cnt, resp_strip_cnt, rd_data_valid, wway);
input rst;
input clk;
input to;                                                       // state machine time-out
input rdy;
input wdf_rdy;
input fifo_empty;
input rd_rst_busy;
output reg rd_fifo;
input wb_write_request128_t fifo_out;
output reg [3:0] state;
input [5:0] num_strips;
input [5:0] req_strip_cnt;
input [5:0] resp_strip_cnt;
input rd_data_valid;
output reg [1:0] wway;

reg [3:0] next_state;
reg next_rd_fifo;

always_ff @(posedge clk)
        state <= next_state;
always_ff @(posedge clk)
        rd_fifo <= next_rd_fifo;
always_ff @(posedge clk)
if (rst)
        wway <= 2'd0;
else begin
        if (state==mpmc10_pkg::PRESET1)
                wway <= wway + 2'd1;
end

always_comb
if (rst) begin
        next_state <= mpmc10_pkg::IDLE; 
        next_rd_fifo <= 1'b0;
end
else begin
        next_rd_fifo <= 1'b0;
        case(state)
        mpmc10_pkg::IDLE:
                if (!fifo_empty && !rd_rst_busy) begin
                        next_rd_fifo <= 1'b1;
                        next_state <= mpmc10_pkg::PRESET1;
                end
                else
                        next_state <= mpmc10_pkg::IDLE;
        mpmc10_pkg::PRESET1:
                next_state <= mpmc10_pkg::PRESET2;
        mpmc10_pkg::PRESET2:
                next_state <= mpmc10_pkg::PRESET3;
        mpmc10_pkg::PRESET3:
                if (fifo_out.stb & fifo_out.we)
                        next_state <= mpmc10_pkg::WRITE_DATA0;
                else
                        next_state <= mpmc10_pkg::READ_DATA0;
        // Write data to the data fifo
        // Write occurs when app_wdf_wren is true and app_wdf_rdy is true
        mpmc10_pkg::WRITE_DATA0:
                // Issue a write command if the fifo is full.
        //      if (!app_wdf_rdy)
        //              next_state <= WRITE_DATA1;
        //      else 
                if (wdf_rdy)// && req_strip_cnt==num_strips)
                        next_state <= mpmc10_pkg::WRITE_DATA1;
                else
                        next_state <= mpmc10_pkg::WRITE_DATA0;
        mpmc10_pkg::WRITE_DATA1:
                next_state <= mpmc10_pkg::WRITE_DATA2;
        mpmc10_pkg::WRITE_DATA2:
                if (rdy)
                        next_state <= mpmc10_pkg::WRITE_DATA3;
                else
                        next_state <= mpmc10_pkg::WRITE_DATA2;
        mpmc10_pkg::WRITE_DATA3:
                next_state <= mpmc10_pkg::IDLE;

        // There could be multiple read requests submitted before any response occurs.
        // Stay in the SET_CMD_RD until all requested strips have been processed.
        mpmc10_pkg::READ_DATA0:
                next_state <= mpmc10_pkg::READ_DATA1;
        // Could it take so long to do the request that we start getting responses
        // back?
        mpmc10_pkg::READ_DATA1:
                if (rdy && req_strip_cnt==num_strips)
                        next_state <= mpmc10_pkg::READ_DATA2;
                else
                        next_state <= mpmc10_pkg::READ_DATA1;
        // Wait for incoming responses, but only for so long to prevent a hang.
        mpmc10_pkg::READ_DATA2:
                if (rd_data_valid && resp_strip_cnt==num_strips)
                        next_state <= mpmc10_pkg::WAIT_NACK;
                else
                        next_state <= mpmc10_pkg::READ_DATA2;

        mpmc10_pkg::WAIT_NACK:
                // If we're not seeing a nack and there is a channel selected, then the
                // cache tag must not have updated correctly.
                // For writes, assume a nack by now.
                next_state <= mpmc10_pkg::IDLE;
                
        default:        next_state <= mpmc10_pkg::IDLE;
        endcase

        // Is the state machine hung?
//      if (to)
//              next_state <= mpmc10_pkg::IDLE;
end

endmodule