OpenCores
URL https://opencores.org/ocsvn/neorv32/neorv32/trunk

Subversion Repositories neorv32

[/] [neorv32/] [trunk/] [rtl/] [core/] [neorv32_top.vhd] - Rev 22

Go to most recent revision | Compare with Previous | Blame | View Log

-- #################################################################################################
-- # << NEORV32 - Processor Top Entity >>                                                          #
-- # ********************************************************************************************* #
-- # This is the top entity of the NEORV32 PROCESSOR. Instantiate this unit in your own project    #
-- # and define all the configuration generics according to your needs. Alternatively, you can use #
-- # one of the alternative top entities provided in the "rtl/top_templates" folder.               #
-- #                                                                                               #
-- # Check the processor's documentary for more information: docs/NEORV32.pdf                      #
-- # ********************************************************************************************* #
-- # BSD 3-Clause License                                                                          #
-- #                                                                                               #
-- # Copyright (c) 2020, Stephan Nolting. All rights reserved.                                     #
-- #                                                                                               #
-- # Redistribution and use in source and binary forms, with or without modification, are          #
-- # permitted provided that the following conditions are met:                                     #
-- #                                                                                               #
-- # 1. Redistributions of source code must retain the above copyright notice, this list of        #
-- #    conditions and the following disclaimer.                                                   #
-- #                                                                                               #
-- # 2. Redistributions in binary form must reproduce the above copyright notice, this list of     #
-- #    conditions and the following disclaimer in the documentation and/or other materials        #
-- #    provided with the distribution.                                                            #
-- #                                                                                               #
-- # 3. Neither the name of the copyright holder nor the names of its contributors may be used to  #
-- #    endorse or promote products derived from this software without specific prior written      #
-- #    permission.                                                                                #
-- #                                                                                               #
-- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS   #
-- # OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF               #
-- # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE    #
-- # COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,     #
-- # EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE #
-- # GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED    #
-- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING     #
-- # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED  #
-- # OF THE POSSIBILITY OF SUCH DAMAGE.                                                            #
-- # ********************************************************************************************* #
-- # The NEORV32 Processor - https://github.com/stnolting/neorv32              (c) Stephan Nolting #
-- #################################################################################################
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
 
library neorv32;
use neorv32.neorv32_package.all;
 
entity neorv32_top is
  generic (
    -- General --
    CLOCK_FREQUENCY              : natural := 0;      -- clock frequency of clk_i in Hz
    BOOTLOADER_USE               : boolean := true;   -- implement processor-internal bootloader?
    USER_CODE                    : std_ulogic_vector(31 downto 0) := x"00000000"; -- custom user code
    -- RISC-V CPU Extensions --
    CPU_EXTENSION_RISCV_C        : boolean := false;  -- implement compressed extension?
    CPU_EXTENSION_RISCV_E        : boolean := false;  -- implement embedded RF extension?
    CPU_EXTENSION_RISCV_M        : boolean := false;  -- implement muld/div extension?
    CPU_EXTENSION_RISCV_U        : boolean := false;  -- implement user mode extension?
    CPU_EXTENSION_RISCV_Zicsr    : boolean := true;   -- implement CSR system?
    CPU_EXTENSION_RISCV_Zifencei : boolean := true;   -- implement instruction stream sync.?
    -- Extension Options --
    CSR_COUNTERS_USE             : boolean := true;  -- implement RISC-V perf. counters ([m]instret[h], [m]cycle[h], time[h])?
    FAST_MUL_EN                  : boolean := false; -- use DSPs for M extension's multiplier
    -- Physical Memory Protection (PMP) --
    PMP_USE                      : boolean := false; -- implement PMP?
    PMP_NUM_REGIONS              : natural := 4;     -- number of regions (max 8)
    PMP_GRANULARITY              : natural := 14;    -- minimal region granularity (1=8B, 2=16B, 3=32B, ...) default is 64k
    -- Memory configuration: Instruction memory --
    MEM_ISPACE_BASE              : std_ulogic_vector(31 downto 0) := x"00000000"; -- base address of instruction memory space
    MEM_ISPACE_SIZE              : natural := 16*1024; -- total size of instruction memory space in byte
    MEM_INT_IMEM_USE             : boolean := true;   -- implement processor-internal instruction memory
    MEM_INT_IMEM_SIZE            : natural := 16*1024; -- size of processor-internal instruction memory in bytes
    MEM_INT_IMEM_ROM             : boolean := false;  -- implement processor-internal instruction memory as ROM
    -- Memory configuration: Data memory --
    MEM_DSPACE_BASE              : std_ulogic_vector(31 downto 0) := x"80000000"; -- base address of data memory space
    MEM_DSPACE_SIZE              : natural := 8*1024; -- total size of data memory space in byte
    MEM_INT_DMEM_USE             : boolean := true;   -- implement processor-internal data memory
    MEM_INT_DMEM_SIZE            : natural := 8*1024; -- size of processor-internal data memory in bytes
    -- Memory configuration: External memory interface --
    MEM_EXT_USE                  : boolean := false;  -- implement external memory bus interface?
    MEM_EXT_REG_STAGES           : natural := 2;      -- number of interface register stages (0,1,2)
    MEM_EXT_TIMEOUT              : natural := 15;     -- cycles after which a valid bus access will timeout
    -- Processor peripherals --
    IO_GPIO_USE                  : boolean := true;   -- implement general purpose input/output port unit (GPIO)?
    IO_MTIME_USE                 : boolean := true;   -- implement machine system timer (MTIME)?
    IO_UART_USE                  : boolean := true;   -- implement universal asynchronous receiver/transmitter (UART)?
    IO_SPI_USE                   : boolean := true;   -- implement serial peripheral interface (SPI)?
    IO_TWI_USE                   : boolean := true;   -- implement two-wire interface (TWI)?
    IO_PWM_USE                   : boolean := true;   -- implement pulse-width modulation unit (PWM)?
    IO_WDT_USE                   : boolean := true;   -- implement watch dog timer (WDT)?
    IO_TRNG_USE                  : boolean := false;  -- implement true random number generator (TRNG)?
    IO_DEVNULL_USE               : boolean := true    -- implement dummy device (DEVNULL)?
  );
  port (
    -- Global control --
    clk_i      : in  std_ulogic := '0'; -- global clock, rising edge
    rstn_i     : in  std_ulogic := '0'; -- global reset, low-active, async
    -- Wishbone bus interface (available if MEM_EXT_USE = true) --
    wb_adr_o   : out std_ulogic_vector(31 downto 0); -- address
    wb_dat_i   : in  std_ulogic_vector(31 downto 0) := (others => '0'); -- read data
    wb_dat_o   : out std_ulogic_vector(31 downto 0); -- write data
    wb_we_o    : out std_ulogic; -- read/write
    wb_sel_o   : out std_ulogic_vector(03 downto 0); -- byte enable
    wb_stb_o   : out std_ulogic; -- strobe
    wb_cyc_o   : out std_ulogic; -- valid cycle
    wb_ack_i   : in  std_ulogic := '0'; -- transfer acknowledge
    wb_err_i   : in  std_ulogic := '0'; -- transfer error
    -- Advanced memory control signals (available if MEM_EXT_USE = true) --
    fence_o    : out std_ulogic; -- indicates an executed FENCE operation
    fencei_o   : out std_ulogic; -- indicates an executed FENCEI operation
    -- GPIO (available if IO_GPIO_USE = true) --
    gpio_o     : out std_ulogic_vector(31 downto 0); -- parallel output
    gpio_i     : in  std_ulogic_vector(31 downto 0) := (others => '0'); -- parallel input
    -- UART (available if IO_UART_USE = true) --
    uart_txd_o : out std_ulogic; -- UART send data
    uart_rxd_i : in  std_ulogic := '0'; -- UART receive data
    -- SPI (available if IO_SPI_USE = true) --
    spi_sck_o  : out std_ulogic; -- SPI serial clock
    spi_sdo_o  : out std_ulogic; -- controller data out, peripheral data in
    spi_sdi_i  : in  std_ulogic := '0'; -- controller data in, peripheral data out
    spi_csn_o  : out std_ulogic_vector(07 downto 0); -- SPI CS
    -- TWI (available if IO_TWI_USE = true) --
    twi_sda_io : inout std_logic := 'H'; -- twi serial data line
    twi_scl_io : inout std_logic := 'H'; -- twi serial clock line
    -- PWM (available if IO_PWM_USE = true) --
    pwm_o      : out std_ulogic_vector(03 downto 0); -- pwm channels
    -- Interrupts --
    msw_irq_i  : in  std_ulogic := '0'; -- machine software interrupt
    mext_irq_i : in  std_ulogic := '0'  -- machine external interrupt
  );
end neorv32_top;
 
architecture neorv32_top_rtl of neorv32_top is
 
  -- CPU boot address --
  constant boot_addr_c : std_ulogic_vector(31 downto 0) := cond_sel_stdulogicvector_f(BOOTLOADER_USE, boot_base_c, MEM_ISPACE_BASE);
 
  -- reset generator --
  signal rstn_i_sync0 : std_ulogic;
  signal rstn_i_sync1 : std_ulogic;
  signal rstn_i_sync2 : std_ulogic;
  signal rstn_gen     : std_ulogic_vector(3 downto 0);
  signal ext_rstn     : std_ulogic;
  signal sys_rstn     : std_ulogic;
  signal wdt_rstn     : std_ulogic;
 
  -- clock generator --
  signal clk_div    : std_ulogic_vector(11 downto 0);
  signal clk_div_ff : std_ulogic_vector(11 downto 0);
  signal clk_gen    : std_ulogic_vector(07 downto 0);
  signal wdt_cg_en  : std_ulogic;
  signal uart_cg_en : std_ulogic;
  signal spi_cg_en  : std_ulogic;
  signal twi_cg_en  : std_ulogic;
  signal pwm_cg_en  : std_ulogic;
 
  -- bus interface --
  type bus_interface_t is record
    addr   : std_ulogic_vector(data_width_c-1 downto 0); -- bus access address
    rdata  : std_ulogic_vector(data_width_c-1 downto 0); -- bus read data
    wdata  : std_ulogic_vector(data_width_c-1 downto 0); -- bus write data
    ben    : std_ulogic_vector(03 downto 0); -- byte enable
    we     : std_ulogic; -- write enable
    re     : std_ulogic; -- read enable
    cancel : std_ulogic; -- cancel current transfer
    ack    : std_ulogic; -- bus transfer acknowledge
    err    : std_ulogic; -- bus transfer error
    fence  : std_ulogic; -- fence(i) instruction executed
  end record;
  signal cpu_i, cpu_d, p_bus : bus_interface_t;
 
  -- io space access --
  signal io_acc  : std_ulogic;
  signal io_rden : std_ulogic;
  signal io_wren : std_ulogic;
 
  -- read-back busses -
  signal imem_rdata     : std_ulogic_vector(data_width_c-1 downto 0);
  signal imem_ack       : std_ulogic;
  signal dmem_rdata     : std_ulogic_vector(data_width_c-1 downto 0);
  signal dmem_ack       : std_ulogic;
  signal bootrom_rdata  : std_ulogic_vector(data_width_c-1 downto 0);
  signal bootrom_ack    : std_ulogic;
  signal wishbone_rdata : std_ulogic_vector(data_width_c-1 downto 0);
  signal wishbone_ack   : std_ulogic;
  signal wishbone_err   : std_ulogic;
  signal gpio_rdata     : std_ulogic_vector(data_width_c-1 downto 0);
  signal gpio_ack       : std_ulogic;
  signal mtime_rdata    : std_ulogic_vector(data_width_c-1 downto 0);
  signal mtime_ack      : std_ulogic;
  signal uart_rdata     : std_ulogic_vector(data_width_c-1 downto 0);
  signal uart_ack       : std_ulogic;
  signal spi_rdata      : std_ulogic_vector(data_width_c-1 downto 0);
  signal spi_ack        : std_ulogic;
  signal twi_rdata      : std_ulogic_vector(data_width_c-1 downto 0);
  signal twi_ack        : std_ulogic;
  signal pwm_rdata      : std_ulogic_vector(data_width_c-1 downto 0);
  signal pwm_ack        : std_ulogic;
  signal wdt_rdata      : std_ulogic_vector(data_width_c-1 downto 0);
  signal wdt_ack        : std_ulogic;
  signal trng_rdata     : std_ulogic_vector(data_width_c-1 downto 0);
  signal trng_ack       : std_ulogic;
  signal devnull_rdata  : std_ulogic_vector(data_width_c-1 downto 0);
  signal devnull_ack    : std_ulogic;
  signal sysinfo_rdata  : std_ulogic_vector(data_width_c-1 downto 0);
  signal sysinfo_ack    : std_ulogic;
 
  -- IRQs --
  signal mtime_irq : std_ulogic;
  signal fast_irq  : std_ulogic_vector(3 downto 0);
  signal gpio_irq  : std_ulogic;
  signal wdt_irq   : std_ulogic;
  signal uart_irq  : std_ulogic;
  signal spi_irq   : std_ulogic;
  signal twi_irq   : std_ulogic;
 
  -- misc --
  signal mtime_time : std_ulogic_vector(63 downto 0); -- current system time from MTIME
 
begin
 
  -- Sanity Checks --------------------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  sanity_check: process(clk_i)
  begin
    if rising_edge(clk_i) then
      -- internal bootloader memory --
      if (BOOTLOADER_USE = true) and (boot_size_c > boot_max_size_c) then
        assert false report "NEORV32 PROCESSOR CONFIG ERROR! Boot ROM size out of range." severity error;
      end if;
      if (BOOTLOADER_USE = true) and (MEM_INT_IMEM_ROM = true) then
        assert false report "NEORV32 PROCESSOR CONFIG WARNING! IMEM is configured as read-only. Bootloader will not be able to load new executables." severity warning;
      end if;
 
      -- memory system - data/instruction fetch --
      if (MEM_EXT_USE = false) then
        if (MEM_INT_DMEM_USE = false) then
          assert false report "NEORV32 PROCESSOR CONFIG ERROR! Core cannot fetch data without external memory interface and internal data memory." severity error;
        end if;
        if (MEM_INT_IMEM_USE = false) and (BOOTLOADER_USE = false) then
          assert false report "NEORV32 PROCESSOR CONFIG ERROR! Core cannot fetch instructions without external memory interface, internal data memory and bootloader." severity error;
        end if;
      end if;
 
      -- memory system --
      if (MEM_ISPACE_BASE(1 downto 0) /= "00") then
        assert false report "NEORV32 PROCESSOR CONFIG ERROR! Instruction memory space base address must be 4-byte-aligned." severity error;
      end if;
      if (MEM_DSPACE_BASE(1 downto 0) /= "00") then
        assert false report "NEORV32 PROCESSOR CONFIG ERROR! Data memory space base address must be 4-byte-aligned." severity error;
      end if;
      if (MEM_INT_IMEM_USE = true) and (MEM_INT_IMEM_SIZE > MEM_ISPACE_SIZE) then
        assert false report "NEORV32 PROCESSOR CONFIG ERROR! Internal instruction memory (IMEM) cannot be greater than total instruction address space." severity error;
      end if;
      if (MEM_INT_DMEM_USE = true) and (MEM_INT_DMEM_SIZE > MEM_DSPACE_SIZE) then
        assert false report "NEORV32 PROCESSOR CONFIG ERROR! Internal data memory (DMEM) cannot be greater than total data address space." severity error;
      end if;
      if (MEM_EXT_TIMEOUT < 1) then
        assert false report "NEORV32 PROCESSOR CONFIG ERROR! Invalid bus timeout. Processor-internal components have 1 cycle delay." severity error;
      end if;
 
      -- clock --
      if (CLOCK_FREQUENCY = 0) then
        assert false report "NEORV32 PROCESSOR CONFIG ERROR! Core clock frequency (CLOCK_FREQUENCY) not specified." severity error;
      end if;
 
      -- memory layout notifier --
      if (MEM_ISPACE_BASE /= x"00000000") then
        assert false report "NEORV32 PROCESSOR CONFIG WARNING! Non-default base address for instruction address space. Make sure this is sync with the software framwork." severity warning;
      end if;
      if (MEM_DSPACE_BASE /= x"80000000") then
        assert false report "NEORV32 PROCESSOR CONFIG WARNING! Non-default base address for data address space. Make sure this is sync with the software framwork." severity warning;
      end if;
    end if;
  end process sanity_check;
 
 
  -- Reset Generator ------------------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  reset_generator_sync: process(clk_i)
  begin
    -- make sure the external reset is free of metastability and has a minimal duration of 1 clock cycle
    if rising_edge(clk_i) then
      rstn_i_sync0 <= rstn_i;
      rstn_i_sync1 <= rstn_i_sync0;
      rstn_i_sync2 <= rstn_i_sync1;
    end if;
  end process reset_generator_sync;
 
  -- keep internal reset active for at least 4 clock cycles
  reset_generator: process(rstn_i_sync1, rstn_i_sync2, clk_i)
  begin
    if ((rstn_i_sync1 or rstn_i_sync2) = '0') then -- signal stable somehow?
      rstn_gen <= (others => '0');
    elsif rising_edge(clk_i) then
      rstn_gen <= rstn_gen(rstn_gen'left-1 downto 0) & '1';
    end if;
  end process reset_generator;
 
  ext_rstn <= rstn_gen(rstn_gen'left); -- the beautified external reset signal
  sys_rstn <= ext_rstn and wdt_rstn; -- system reset - can also be triggered by watchdog
 
 
  -- Clock Generator ------------------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  clock_generator: process(sys_rstn, clk_i)
  begin
    if (sys_rstn = '0') then
      clk_div    <= (others => '0');
      clk_div_ff <= (others => '0');
    elsif rising_edge(clk_i) then
      -- anybody wanting some fresh clocks? --
      if ((wdt_cg_en or uart_cg_en or spi_cg_en or twi_cg_en or pwm_cg_en) = '1') then
        clk_div    <= std_ulogic_vector(unsigned(clk_div) + 1);
        clk_div_ff <= clk_div;
      end if;
    end if;
  end process clock_generator;
 
  -- clock enable select: rising edge detectors --
  clk_gen(clk_div2_c)    <= clk_div(0)  and (not clk_div_ff(0));  -- CLK/2
  clk_gen(clk_div4_c)    <= clk_div(1)  and (not clk_div_ff(1));  -- CLK/4
  clk_gen(clk_div8_c)    <= clk_div(2)  and (not clk_div_ff(2));  -- CLK/8
  clk_gen(clk_div64_c)   <= clk_div(5)  and (not clk_div_ff(5));  -- CLK/64
  clk_gen(clk_div128_c)  <= clk_div(6)  and (not clk_div_ff(6));  -- CLK/128
  clk_gen(clk_div1024_c) <= clk_div(9)  and (not clk_div_ff(9));  -- CLK/1024
  clk_gen(clk_div2048_c) <= clk_div(10) and (not clk_div_ff(10)); -- CLK/2048
  clk_gen(clk_div4096_c) <= clk_div(11) and (not clk_div_ff(11)); -- CLK/4096
 
 
  -- CPU ------------------------------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_cpu_inst: neorv32_cpu
  generic map (
    -- General --
    HW_THREAD_ID                 => (others => '0'), -- hardware thread id
    CPU_BOOT_ADDR                => boot_addr_c,     -- cpu boot address
    -- RISC-V CPU Extensions --
    CPU_EXTENSION_RISCV_C        => CPU_EXTENSION_RISCV_C,        -- implement compressed extension?
    CPU_EXTENSION_RISCV_E        => CPU_EXTENSION_RISCV_E,        -- implement embedded RF extension?
    CPU_EXTENSION_RISCV_M        => CPU_EXTENSION_RISCV_M,        -- implement muld/div extension?
    CPU_EXTENSION_RISCV_U        => CPU_EXTENSION_RISCV_U,        -- implement user mode extension?
    CPU_EXTENSION_RISCV_Zicsr    => CPU_EXTENSION_RISCV_Zicsr,    -- implement CSR system?
    CPU_EXTENSION_RISCV_Zifencei => CPU_EXTENSION_RISCV_Zifencei, -- implement instruction stream sync.?
    -- Extension Options --
    CSR_COUNTERS_USE             => CSR_COUNTERS_USE, -- implement RISC-V perf. counters ([m]instret[h], [m]cycle[h], time[h])?
    FAST_MUL_EN                  => FAST_MUL_EN,      -- use DSPs for M extension's multiplier
    -- Physical Memory Protection (PMP) --
    PMP_USE                      => PMP_USE,         -- implement PMP?
    PMP_NUM_REGIONS              => PMP_NUM_REGIONS, -- number of regions (max 8)
    PMP_GRANULARITY              => PMP_GRANULARITY, -- minimal region granularity (1=8B, 2=16B, 3=32B, ...) default is 64k
    -- Bus Interface --
    BUS_TIMEOUT                  => MEM_EXT_TIMEOUT   -- cycles after which a valid bus access will timeout
  )
  port map (
    -- global control --
    clk_i          => clk_i,        -- global clock, rising edge
    rstn_i         => sys_rstn,     -- global reset, low-active, async
    -- instruction bus interface --
    i_bus_addr_o   => cpu_i.addr,   -- bus access address
    i_bus_rdata_i  => cpu_i.rdata,  -- bus read data
    i_bus_wdata_o  => cpu_i.wdata,  -- bus write data
    i_bus_ben_o    => cpu_i.ben,    -- byte enable
    i_bus_we_o     => cpu_i.we,     -- write enable
    i_bus_re_o     => cpu_i.re,     -- read enable
    i_bus_cancel_o => cpu_i.cancel, -- cancel current bus transaction
    i_bus_ack_i    => cpu_i.ack,    -- bus transfer acknowledge
    i_bus_err_i    => cpu_i.err,    -- bus transfer error
    i_bus_fence_o  => cpu_i.fence,  -- executed FENCEI operation
    -- data bus interface --
    d_bus_addr_o   => cpu_d.addr,   -- bus access address
    d_bus_rdata_i  => cpu_d.rdata,  -- bus read data
    d_bus_wdata_o  => cpu_d.wdata,  -- bus write data
    d_bus_ben_o    => cpu_d.ben,    -- byte enable
    d_bus_we_o     => cpu_d.we,     -- write enable
    d_bus_re_o     => cpu_d.re,     -- read enable
    d_bus_cancel_o => cpu_d.cancel, -- cancel current bus transaction
    d_bus_ack_i    => cpu_d.ack,    -- bus transfer acknowledge
    d_bus_err_i    => cpu_d.err,    -- bus transfer error
    d_bus_fence_o  => cpu_d.fence,  -- executed FENCE operation
    -- system time input from MTIME --
    time_i         => mtime_time,   -- current system time
    -- interrupts (risc-v compliant) --
    msw_irq_i      => msw_irq_i,    -- machine software interrupt
    mext_irq_i     => mext_irq_i,   -- machine external interrupt request
    mtime_irq_i    => mtime_irq,    -- machine timer interrupt
    -- fast interrupts (custom) --
    firq_i         => fast_irq
  );
 
  -- advanced memory control --
  fence_o  <= cpu_d.fence; -- indicates an executed FENCE operation
  fencei_o <= cpu_i.fence; -- indicates an executed FENCEI operation
 
  -- fast interrupts --
  fast_irq(0) <= wdt_irq; -- highest priority
  fast_irq(1) <= gpio_irq;
  fast_irq(2) <= uart_irq;
  fast_irq(3) <= spi_irq or twi_irq; -- lowest priority, can be triggered by SPI or TWI
 
 
  -- CPU Crossbar Switch --------------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_busswitch_inst: neorv32_busswitch
  generic map (
    PORT_CA_READ_ONLY => false, -- set if controller port A is read-only
    PORT_CB_READ_ONLY => true   -- set if controller port B is read-only
  )
  port map (
    -- global control --
    clk_i           => clk_i,        -- global clock, rising edge
    rstn_i          => sys_rstn,     -- global reset, low-active, async
    -- controller interface a --
    ca_bus_addr_i   => cpu_d.addr,   -- bus access address
    ca_bus_rdata_o  => cpu_d.rdata,  -- bus read data
    ca_bus_wdata_i  => cpu_d.wdata,  -- bus write data
    ca_bus_ben_i    => cpu_d.ben,    -- byte enable
    ca_bus_we_i     => cpu_d.we,     -- write enable
    ca_bus_re_i     => cpu_d.re,     -- read enable
    ca_bus_cancel_i => cpu_d.cancel, -- cancel current bus transaction
    ca_bus_ack_o    => cpu_d.ack,    -- bus transfer acknowledge
    ca_bus_err_o    => cpu_d.err,    -- bus transfer error
    -- controller interface b --
    cb_bus_addr_i   => cpu_i.addr,   -- bus access address
    cb_bus_rdata_o  => cpu_i.rdata,  -- bus read data
    cb_bus_wdata_i  => cpu_i.wdata,  -- bus write data
    cb_bus_ben_i    => cpu_i.ben,    -- byte enable
    cb_bus_we_i     => cpu_i.we,     -- write enable
    cb_bus_re_i     => cpu_i.re,     -- read enable
    cb_bus_cancel_i => cpu_i.cancel, -- cancel current bus transaction
    cb_bus_ack_o    => cpu_i.ack,    -- bus transfer acknowledge
    cb_bus_err_o    => cpu_i.err,    -- bus transfer error
    -- peripheral bus --
    p_bus_addr_o    => p_bus.addr,   -- bus access address
    p_bus_rdata_i   => p_bus.rdata,  -- bus read data
    p_bus_wdata_o   => p_bus.wdata,  -- bus write data
    p_bus_ben_o     => p_bus.ben,    -- byte enable
    p_bus_we_o      => p_bus.we,     -- write enable
    p_bus_re_o      => p_bus.re,     -- read enable
    p_bus_cancel_o  => p_bus.cancel, -- cancel current bus transaction
    p_bus_ack_i     => p_bus.ack,    -- bus transfer acknowledge
    p_bus_err_i     => p_bus.err     -- bus transfer error
  );
 
  -- processor bus: CPU data input --
  p_bus.rdata <= (imem_rdata or dmem_rdata or bootrom_rdata) or wishbone_rdata or (gpio_rdata or mtime_rdata or uart_rdata or
                 spi_rdata or twi_rdata or pwm_rdata or wdt_rdata or trng_rdata or devnull_rdata or sysinfo_rdata);
 
  -- processor bus: CPU data ACK input --
  p_bus.ack <= (imem_ack or dmem_ack or bootrom_ack) or wishbone_ack or (gpio_ack or mtime_ack or uart_ack or
               spi_ack or twi_ack or pwm_ack or wdt_ack or trng_ack or devnull_ack or sysinfo_ack);
 
  -- processor bus: CPU data bus error input --
  p_bus.err <= wishbone_err;
 
 
  -- Processor-Internal Instruction Memory (IMEM) -------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_int_imem_inst_true:
  if (MEM_INT_IMEM_USE = true) generate
    neorv32_int_imem_inst: neorv32_imem
    generic map (
      IMEM_BASE      => MEM_ISPACE_BASE,   -- memory base address
      IMEM_SIZE      => MEM_INT_IMEM_SIZE, -- processor-internal instruction memory size in bytes
      IMEM_AS_ROM    => MEM_INT_IMEM_ROM,  -- implement IMEM as read-only memory?
      BOOTLOADER_USE => BOOTLOADER_USE     -- implement and use bootloader?
    )
    port map (
      clk_i  => clk_i,       -- global clock line
      rden_i => p_bus.re,    -- read enable
      wren_i => p_bus.we,    -- write enable
      ben_i  => p_bus.ben,   -- byte write enable
      upen_i => '1',         -- update enable
      addr_i => p_bus.addr,  -- address
      data_i => p_bus.wdata, -- data in
      data_o => imem_rdata,  -- data out
      ack_o  => imem_ack     -- transfer acknowledge
    );
  end generate;
 
  neorv32_int_imem_inst_false:
  if (MEM_INT_IMEM_USE = false) generate
    imem_rdata <= (others => '0');
    imem_ack   <= '0';
  end generate;
 
 
  -- Processor-Internal Data Memory (DMEM) --------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_int_dmem_inst_true:
  if (MEM_INT_DMEM_USE = true) generate
    neorv32_int_dmem_inst: neorv32_dmem
    generic map (
      DMEM_BASE => MEM_DSPACE_BASE,  -- memory base address
      DMEM_SIZE => MEM_INT_DMEM_SIZE -- processor-internal data memory size in bytes
    )
    port map (
      clk_i  => clk_i,       -- global clock line
      rden_i => p_bus.re,    -- read enable
      wren_i => p_bus.we,    -- write enable
      ben_i  => p_bus.ben,   -- byte write enable
      addr_i => p_bus.addr,  -- address
      data_i => p_bus.wdata, -- data in
      data_o => dmem_rdata,  -- data out
      ack_o  => dmem_ack     -- transfer acknowledge
    );
  end generate;
 
  neorv32_int_dmem_inst_false:
  if (MEM_INT_DMEM_USE = false) generate
    dmem_rdata <= (others => '0');
    dmem_ack   <= '0';
  end generate;
 
 
  -- Processor-Internal Bootloader ROM (BOOTROM) --------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_boot_rom_inst_true:
  if (BOOTLOADER_USE = true) generate
    neorv32_boot_rom_inst: neorv32_boot_rom
    port map (
      clk_i  => clk_i,         -- global clock line
      rden_i => p_bus.re,      -- read enable
      addr_i => p_bus.addr,    -- address
      data_o => bootrom_rdata, -- data out
      ack_o  => bootrom_ack    -- transfer acknowledge
    );
  end generate;
 
  neorv32_boot_rom_inst_false:
  if (BOOTLOADER_USE = false) generate
    bootrom_rdata <= (others => '0');
    bootrom_ack   <= '0';
  end generate;
 
 
  -- External Wishbone Gateway (WISHBONE) ---------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_wishbone_inst_true:
  if (MEM_EXT_USE = true) generate
    neorv32_wishbone_inst: neorv32_wishbone
    generic map (
      INTERFACE_REG_STAGES => MEM_EXT_REG_STAGES, -- number of interface register stages (0,1,2)
      -- Memory configuration: Instruction memory --
      MEM_ISPACE_BASE      => MEM_ISPACE_BASE,    -- base address of instruction memory space
      MEM_ISPACE_SIZE      => MEM_ISPACE_SIZE,    -- total size of instruction memory space in byte
      MEM_INT_IMEM_USE     => MEM_INT_IMEM_USE,   -- implement processor-internal instruction memory
      MEM_INT_IMEM_SIZE    => MEM_INT_IMEM_SIZE,  -- size of processor-internal instruction memory in bytes
      -- Memory configuration: Data memory --
      MEM_DSPACE_BASE      => MEM_DSPACE_BASE,    -- base address of data memory space
      MEM_DSPACE_SIZE      => MEM_DSPACE_SIZE,    -- total size of data memory space in byte
      MEM_INT_DMEM_USE     => MEM_INT_DMEM_USE,   -- implement processor-internal data memory
      MEM_INT_DMEM_SIZE    => MEM_INT_DMEM_SIZE   -- size of processor-internal data memory in bytes
    )
    port map (
      -- global control --
      clk_i    => clk_i,          -- global clock line
      rstn_i   => sys_rstn,       -- global reset line, low-active
      -- host access --
      addr_i   => p_bus.addr,     -- address
      rden_i   => p_bus.re,       -- read enable
      wren_i   => p_bus.we,       -- write enable
      ben_i    => p_bus.ben,      -- byte write enable
      data_i   => p_bus.wdata,    -- data in
      data_o   => wishbone_rdata, -- data out
      cancel_i => p_bus.cancel,   -- cancel current transaction
      ack_o    => wishbone_ack,   -- transfer acknowledge
      err_o    => wishbone_err,   -- transfer error
      -- wishbone interface --
      wb_adr_o => wb_adr_o,       -- address
      wb_dat_i => wb_dat_i,       -- read data
      wb_dat_o => wb_dat_o,       -- write data
      wb_we_o  => wb_we_o,        -- read/write
      wb_sel_o => wb_sel_o,       -- byte enable
      wb_stb_o => wb_stb_o,       -- strobe
      wb_cyc_o => wb_cyc_o,       -- valid cycle
      wb_ack_i => wb_ack_i,       -- transfer acknowledge
      wb_err_i => wb_err_i        -- transfer error
    );
  end generate;
 
  neorv32_wishbone_inst_false:
  if (MEM_EXT_USE = false) generate
    wishbone_rdata <= (others => '0');
    wishbone_ack   <= '0';
    wishbone_err   <= '0';
    --
    wb_adr_o <= (others => '0');
    wb_dat_o <= (others => '0');
    wb_we_o  <= '0';
    wb_sel_o <= (others => '0');
    wb_stb_o <= '0';
    wb_cyc_o <= '0';
  end generate;
 
 
  -- IO Access? -----------------------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  io_acc  <= '1' when (p_bus.addr(data_width_c-1 downto index_size_f(io_size_c)) = io_base_c(data_width_c-1 downto index_size_f(io_size_c))) else '0';
  io_rden <= io_acc and p_bus.re;
  -- the peripheral/IO devices in the IO area can only be written in word mode (reduces HW complexity)
  io_wren <= io_acc and p_bus.we and p_bus.ben(3) and p_bus.ben(2) and p_bus.ben(1) and p_bus.ben(0);
 
 
  -- General Purpose Input/Output Port (GPIO) -----------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_gpio_inst_true:
  if (IO_GPIO_USE = true) generate
    neorv32_gpio_inst: neorv32_gpio
    port map (
      -- host access --
      clk_i  => clk_i,       -- global clock line
      addr_i => p_bus.addr,  -- address
      rden_i => io_rden,     -- read enable
      wren_i => io_wren,     -- write enable
      data_i => p_bus.wdata, -- data in
      data_o => gpio_rdata,  -- data out
      ack_o  => gpio_ack,    -- transfer acknowledge
      -- parallel io --
      gpio_o => gpio_o,
      gpio_i => gpio_i,
      -- interrupt --
      irq_o  => gpio_irq     -- pin-change interrupt
    );
  end generate;
 
  neorv32_gpio_inst_false:
  if (IO_GPIO_USE = false) generate
    gpio_rdata <= (others => '0');
    gpio_ack   <= '0';
    gpio_o     <= (others => '0');
    gpio_irq   <= '0';
  end generate;
 
 
  -- Watch Dog Timer (WDT) ------------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_wdt_inst_true:
  if (IO_WDT_USE = true) generate
    neorv32_wdt_inst: neorv32_wdt
    port map (
      -- host access --
      clk_i       => clk_i,       -- global clock line
      rstn_i      => ext_rstn,    -- global reset line, low-active
      rden_i      => io_rden,     -- read enable
      wren_i      => io_wren,     -- write enable
      addr_i      => p_bus.addr,  -- address
      data_i      => p_bus.wdata, -- data in
      data_o      => wdt_rdata,   -- data out
      ack_o       => wdt_ack,     -- transfer acknowledge
      -- clock generator --
      clkgen_en_o => wdt_cg_en,   -- enable clock generator
      clkgen_i    => clk_gen,
      -- timeout event --
      irq_o       => wdt_irq,     -- timeout IRQ
      rstn_o      => wdt_rstn     -- timeout reset, low_active, use it as async!
    );
  end generate;
 
  neorv32_wdt_inst_false:
  if (IO_WDT_USE = false) generate
    wdt_rdata <= (others => '0');
    wdt_ack   <= '0';
    wdt_irq   <= '0';
    wdt_rstn  <= '1';
    wdt_cg_en <= '0';
  end generate;
 
 
  -- Machine System Timer (MTIME) -----------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_mtime_inst_true:
  if (IO_MTIME_USE = true) generate
    neorv32_mtime_inst: neorv32_mtime
    port map (
      -- host access --
      clk_i     => clk_i,       -- global clock line
      rstn_i    => sys_rstn,    -- global reset, low-active, async
      addr_i    => p_bus.addr,  -- address
      rden_i    => io_rden,     -- read enable
      wren_i    => io_wren,     -- write enable
      data_i    => p_bus.wdata, -- data in
      data_o    => mtime_rdata, -- data out
      ack_o     => mtime_ack,   -- transfer acknowledge
      -- time output for CPU --
      time_o    => mtime_time,  -- current system time
      -- interrupt --
      irq_o     => mtime_irq    -- interrupt request
    );
  end generate;
 
  neorv32_mtime_inst_false:
  if (IO_MTIME_USE = false) generate
    mtime_rdata <= (others => '0');
    mtime_time  <= (others => '0');
    mtime_ack   <= '0';
    mtime_irq   <= '0';
  end generate;
 
 
  -- Universal Asynchronous Receiver/Transmitter (UART) -------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_uart_inst_true:
  if (IO_UART_USE = true) generate
    neorv32_uart_inst: neorv32_uart
    port map (
      -- host access --
      clk_i       => clk_i,       -- global clock line
      addr_i      => p_bus.addr,  -- address
      rden_i      => io_rden,     -- read enable
      wren_i      => io_wren,     -- write enable
      data_i      => p_bus.wdata, -- data in
      data_o      => uart_rdata,  -- data out
      ack_o       => uart_ack,    -- transfer acknowledge
      -- clock generator --
      clkgen_en_o => uart_cg_en,  -- enable clock generator
      clkgen_i    => clk_gen,
      -- com lines --
      uart_txd_o  => uart_txd_o,
      uart_rxd_i  => uart_rxd_i,
      -- interrupts --
      uart_irq_o  => uart_irq     -- uart rx/tx interrupt
    );
  end generate;
 
  neorv32_uart_inst_false:
  if (IO_UART_USE = false) generate
    uart_rdata <= (others => '0');
    uart_ack   <= '0';
    uart_txd_o <= '0';
    uart_cg_en <= '0';
    uart_irq   <= '0';
  end generate;
 
 
  -- Serial Peripheral Interface (SPI) ------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_spi_inst_true:
  if (IO_SPI_USE = true) generate
    neorv32_spi_inst: neorv32_spi
    port map (
      -- host access --
      clk_i       => clk_i,       -- global clock line
      addr_i      => p_bus.addr,  -- address
      rden_i      => io_rden,     -- read enable
      wren_i      => io_wren,     -- write enable
      data_i      => p_bus.wdata, -- data in
      data_o      => spi_rdata,   -- data out
      ack_o       => spi_ack,     -- transfer acknowledge
      -- clock generator --
      clkgen_en_o => spi_cg_en,   -- enable clock generator
      clkgen_i    => clk_gen,
      -- com lines --
      spi_sck_o   => spi_sck_o,   -- SPI serial clock
      spi_sdo_o   => spi_sdo_o,   -- controller data out, peripheral data in
      spi_sdi_i   => spi_sdi_i,   -- controller data in, peripheral data out
      spi_csn_o   => spi_csn_o,   -- SPI CS
      -- interrupt --
      spi_irq_o   => spi_irq      -- transmission done interrupt
    );
  end generate;
 
  neorv32_spi_inst_false:
  if (IO_SPI_USE = false) generate
    spi_rdata  <= (others => '0');
    spi_ack    <= '0';
    spi_sck_o  <= '0';
    spi_sdo_o  <= '0';
    spi_csn_o  <= (others => '1'); -- CSn lines are low-active
    spi_cg_en  <= '0';
    spi_irq    <= '0';
  end generate;
 
 
  -- Two-Wire Interface (TWI) ---------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_twi_inst_true:
  if (IO_TWI_USE = true) generate
    neorv32_twi_inst: neorv32_twi
    port map (
      -- host access --
      clk_i       => clk_i,       -- global clock line
      addr_i      => p_bus.addr,  -- address
      rden_i      => io_rden,     -- read enable
      wren_i      => io_wren,     -- write enable
      data_i      => p_bus.wdata, -- data in
      data_o      => twi_rdata,   -- data out
      ack_o       => twi_ack,     -- transfer acknowledge
      -- clock generator --
      clkgen_en_o => twi_cg_en,   -- enable clock generator
      clkgen_i    => clk_gen,
      -- com lines --
      twi_sda_io  => twi_sda_io,  -- serial data line
      twi_scl_io  => twi_scl_io,  -- serial clock line
      -- interrupt --
      twi_irq_o   => twi_irq      -- transfer done IRQ
    );
  end generate;
 
  neorv32_twi_inst_false:
  if (IO_TWI_USE = false) generate
    twi_rdata  <= (others => '0');
    twi_ack    <= '0';
--  twi_sda_io <= 'H';
--  twi_scl_io <= 'H';
    twi_cg_en  <= '0';
    twi_irq    <= '0';
  end generate;
 
 
  -- Pulse-Width Modulation Controller (PWM) ------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_pwm_inst_true:
  if (IO_PWM_USE = true) generate
    neorv32_pwm_inst: neorv32_pwm
    port map (
      -- host access --
      clk_i       => clk_i,       -- global clock line
      addr_i      => p_bus.addr,  -- address
      rden_i      => io_rden,     -- read enable
      wren_i      => io_wren,     -- write enable
      data_i      => p_bus.wdata, -- data in
      data_o      => pwm_rdata,   -- data out
      ack_o       => pwm_ack,     -- transfer acknowledge
      -- clock generator --
      clkgen_en_o => pwm_cg_en,   -- enable clock generator
      clkgen_i    => clk_gen,
      -- pwm output channels --
      pwm_o       => pwm_o
    );
  end generate;
 
  neorv32_pwm_inst_false:
  if (IO_PWM_USE = false) generate
    pwm_rdata <= (others => '0');
    pwm_ack   <= '0';
    pwm_cg_en <= '0';
    pwm_o     <= (others => '0');
  end generate;
 
 
  -- True Random Number Generator (TRNG) ----------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_trng_inst_true:
  if (IO_TRNG_USE = true) generate
    neorv32_trng_inst: neorv32_trng
    port map (
      -- host access --
      clk_i  => clk_i,       -- global clock line
      addr_i => p_bus.addr,  -- address
      rden_i => io_rden,     -- read enable
      wren_i => io_wren,     -- write enable
      data_i => p_bus.wdata, -- data in
      data_o => trng_rdata,  -- data out
      ack_o  => trng_ack     -- transfer acknowledge
    );
  end generate;
 
  neorv32_trng_inst_false:
  if (IO_TRNG_USE = false) generate
    trng_rdata <= (others => '0');
    trng_ack   <= '0';
  end generate;
 
 
  -- Dummy Device (DEVNULL) -----------------------------------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_devnull_inst_true:
  if (IO_DEVNULL_USE = true) generate
    neorv32_devnull_inst: neorv32_devnull
    port map (
      -- host access --
      clk_i  => clk_i,         -- global clock line
      addr_i => p_bus.addr,    -- address
      rden_i => io_rden,       -- read enable
      wren_i => io_wren,       -- write enable
      data_i => p_bus.wdata,   -- data in
      data_o => devnull_rdata, -- data out
      ack_o  => devnull_ack    -- transfer acknowledge
    );
  end generate;
 
  neorv32_devnull_inst_false:
  if (IO_DEVNULL_USE = false) generate
    devnull_rdata <= (others => '0');
    devnull_ack   <= '0';
  end generate;
 
 
  -- System Configuration Information Memory (SYSINFO) --------------------------------------
  -- -------------------------------------------------------------------------------------------
  neorv32_sysinfo_inst: neorv32_sysinfo
  generic map (
    -- General --
    CLOCK_FREQUENCY   => CLOCK_FREQUENCY,   -- clock frequency of clk_i in Hz
    BOOTLOADER_USE    => BOOTLOADER_USE,    -- implement processor-internal bootloader?
    USER_CODE         => USER_CODE,         -- custom user code
    -- Memory configuration: Instruction memory --
    MEM_ISPACE_BASE   => MEM_ISPACE_BASE,   -- base address of instruction memory space
    MEM_ISPACE_SIZE   => MEM_ISPACE_SIZE,   -- total size of instruction memory space in byte
    MEM_INT_IMEM_USE  => MEM_INT_IMEM_USE,  -- implement processor-internal instruction memory
    MEM_INT_IMEM_SIZE => MEM_INT_IMEM_SIZE, -- size of processor-internal instruction memory in bytes
    MEM_INT_IMEM_ROM  => MEM_INT_IMEM_ROM,  -- implement processor-internal instruction memory as ROM
    -- Memory configuration: Data memory --
    MEM_DSPACE_BASE   => MEM_DSPACE_BASE,   -- base address of data memory space
    MEM_DSPACE_SIZE   => MEM_DSPACE_SIZE,   -- total size of data memory space in byte
    MEM_INT_DMEM_USE  => MEM_INT_DMEM_USE,  -- implement processor-internal data memory
    MEM_INT_DMEM_SIZE => MEM_INT_DMEM_SIZE, -- size of processor-internal data memory in bytes
    -- Memory configuration: External memory interface --
    MEM_EXT_USE       => MEM_EXT_USE,       -- implement external memory bus interface?
    -- Processor peripherals --
    IO_GPIO_USE       => IO_GPIO_USE,       -- implement general purpose input/output port unit (GPIO)?
    IO_MTIME_USE      => IO_MTIME_USE,      -- implement machine system timer (MTIME)?
    IO_UART_USE       => IO_UART_USE,       -- implement universal asynchronous receiver/transmitter (UART)?
    IO_SPI_USE        => IO_SPI_USE,        -- implement serial peripheral interface (SPI)?
    IO_TWI_USE        => IO_TWI_USE,        -- implement two-wire interface (TWI)?
    IO_PWM_USE        => IO_PWM_USE,        -- implement pulse-width modulation unit (PWM)?
    IO_WDT_USE        => IO_WDT_USE,        -- implement watch dog timer (WDT)?
    IO_TRNG_USE       => IO_TRNG_USE,       -- implement true random number generator (TRNG)?
    IO_DEVNULL_USE    => IO_DEVNULL_USE     -- implement dummy device (DEVNULL)?
  )
  port map (
    -- host access --
    clk_i  => clk_i,         -- global clock line
    addr_i => p_bus.addr,    -- address
    rden_i => io_rden,       -- read enable
    data_o => sysinfo_rdata, -- data out
    ack_o  => sysinfo_ack    -- transfer acknowledge
  );
 
 
end neorv32_top_rtl;
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.