OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [Open8 Tools/] [README.4.CPUInfo.txt] - Rev 178

Compare with Previous | Blame | View Log

----------------------------------------------
Open8 uRISC Assembly language description
----------------------------------------------


--------------------
Hardware information
--------------------

The CPU has 8 8-bit general purpose registers available, 
R0-R7. In some operations, one register is paired with the 
next one so they behave like a 16-bit register.

R0 is a special register, in that it is always the second
unstated operand in commands that work with 2 values (ie. 
ADD R3 adds together R3 and R0), It also recieves the 
results of most commands that have results (ie. ADD R3 
stores the result of R0+R3 in R0).

There are 4 normally used state flags. The Zero flag, 
the Carry flag, the Negative flag, and the Interrupt 
Enable flag. The Negative, Zero, and Carry flags are 
set/reset whenever any operation is carried out on ANY 
register. Ie. If you decrement R3 and it reaches zero, 
the Zero flag gets set. There are also 4 other General 
Purpose flags whose setting and checking is left up to
you if you choose to use them.

These flags are implemented in a bit of memory called
the Program Status Register, or PSR.

There's also a program counter, as you'd expect, but you
can't access it's value from any of the opcodes, directly
or otherwise. That fact, and the lack of a BRanch Always 
command, makes it tough to write easily relocateable 
code.

--------------
OPCODE LISTING
--------------

Opcode        Description [Example]
------------------------------------------------------------------
INC R0-07   | Increment Register [INC R4]
ADC R0-07   | R0=R#+R0 using carry flag [ADC R4]
TX0 R0-R7   | R0=R# [TX0 R2]
OR  R0-R7   | R0=R0|R# [OR R6]
AND R0-R7   | R0=R0&R# [AND R4]
CLR R0      | Clears R0 [CLR R0]
XOR R0-R7   | R0=R0^R# [XOR R2]
ROL R0-R7   | R#=R#<<1. Roll R# Left [ROL R2]
ROR R0-R7   | R#=R#>>1. Roll R# Right [ROR R2]
DEC R0-R7   | R#=R#-1 [DEC R4]
SBC R0-R7   | R0=R0-R# using carry flag [SBC R6]
ADD R0-R7   | R0=R0+R# [ADD R3]
MUL R0-R7   | R1:R0 = Rn * R0
STP PSR_Z   | Set Zero flag [STP PSR_Z]
STP PSR_C   | Set Carry flag [STP PSR_C]
STP PSR_N   | Set Negative flag [STP PSR_N]
STP PSR_I   | Set Interrupt Enable flag [STP PSR_I]
STP PSR_GP4 | Set GP4 flag [STP PSR_GP4]
STP PSR_GP5 | Set GP5 flag [STP PSR_GP5]
STP PSR_GP6 | Set GP6 flag [STP PSR_GP6]
STP PSR_GP7 | Set GP7 flag [STP PSR_GP7]
BTT 0-7     | Test Bit # in R0. Set Zero flag or not.[BTT 2]
CLP PSR_Z   | Clear Zero flag [CLP PSR_Z]
CLP PSR_C   | Clear Carry flag [CLP PSR_C]
CLP PSR_N   | Clear Negative flag [CLP PSR_N]
CLP PSR_I   | Clear Interrupt Enable flag [CLP PSR_I]
CLP PSR_GP4 | Clear GP4 flag [CLP PSR_GP4]
CLP PSR_GP5 | Clear GP5 flag [CLP PSR_GP5]
CLP PSR_GP6 | Clear GP6 flag [CLP PSR_GP6]
CLP PSR_GP7 | Clear GP7 flag [CLP PSR_GP7]
T0X R0-R7   | R#=R0 [TX0 R2]
CMP R0-R7   | Compare R# With R0, put result in R0.[CMP R3]
PSH R0-R7   | Push R# onto the stack. [PSH R2]
POP R0-R7   | Pop R# from the stack. [POP R1]
DBNZ R0-R7  | Decrement register, and branch if result is zero
BNZ         | Branch if Zero flag is not set. [BNZ LABEL]
BNC         | Branch if Carry flag is not set. [BNC LABEL]
BNN         | Branch if Negative flag is not set. [BNN LABEL]
BNI         | Branch if Interrupt Enable flag is not set. [BNI LABEL]
BNGP4       | Branch If GP4 flag is not set. [BNGP4 LABEL]
BNGP5       | Branch If GP5 flag is not set. [BNGP5 LABEL]
BNGP6       | Branch If GP6 flag is not set. [BNGP6 LABEL]
BNGP7       | Branch If FP7 flag is not set. [BNGP7 LABEL]
BRZ         | Branch on Zero flag is set. [BRZ LABEL]
BRC         | Branch if Carry flag is set. [BRC LABEL]
BRN         | Branch on Negative flag is set. [BRN LABEL]
BRI         | Branch if Interrupt Enable flag is set. [BRI LABEL]
BRGP4       | Branch If GP4 flag is set. [BRGP4 LABEL]
BRGP5       | Branch If GP5 flag is set. [BRGP5 LABEL]
BRGP6       | Branch If GP6 flag is set. [BRGP6 LABEL]
BRGP7       | Branch If GP7 flag is set. [BRGP7 LABEL]
USR R0-R7   | User defined opcode. NOP if undefined. [USR R0]
INT 0-7     | (Call?) Interrupt number. [INT 7]
USR2 R0-R7  | User defined opcode 2. NOP if undefined. [USR2 R0]
RSP         | Reset stack pointer. Uses R0+R1 for address. [RSP]
RTS         | Return from subroutine. [RTS]
RTI         | Return from interrupt. [RTI]
BRK         | Break. For debugging. 5 clock NOP. [BRK]
JMP         | Jump to absolute address. [JMP LABEL]
JSR         | Jump to subroutine at absolute address. [JSR LABEL]
UPP R0-R7   | Increment R# and R#+1 as a 16-bit register [UPP R4]
STA R0-R7   | Store R# contents at Address [STA R0,$0020]
STX R0-R7   | Store R0 at location indexed by R# [STX R2]
STO R0-R7   | Store R0 at location indexed by R#+offset [STO R2,$aa]
LDI R0-R7   | Load an Integer into R# [LDI R2,#$00]
LDA R0-R7   | Load R# with the contents at address [LDA R4,$0366]
LDX R0-R7   | Load R0 with location indexed by R# [LDX R2]
LDO R0-R7   | Load R0 with location indexed by R#+offset [LDO R2,$ee]

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.