OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [core/] [sim/] [rtl_sim/] [src/] [wdt_interval.s43] - Rev 111

Go to most recent revision | Compare with Previous | Blame | View Log

/*===========================================================================*/
/* Copyright (C) 2001 Authors                                                */
/*                                                                           */
/* This source file may be used and distributed without restriction provided */
/* that this copyright statement is not removed from the file and that any   */
/* derivative work contains the original copyright notice and the associated */
/* disclaimer.                                                               */
/*                                                                           */
/* This source file is free software; you can redistribute it and/or modify  */
/* it under the terms of the GNU Lesser General Public License as published  */
/* by the Free Software Foundation; either version 2.1 of the License, or    */
/* (at your option) any later version.                                       */
/*                                                                           */
/* This source is distributed in the hope that it will be useful, but WITHOUT*/
/* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or     */
/* FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public       */
/* License for more details.                                                 */
/*                                                                           */
/* You should have received a copy of the GNU Lesser General Public License  */
/* along with this source; if not, write to the Free Software Foundation,    */
/* Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA        */
/*                                                                           */
/*===========================================================================*/
/*                            WATCHDOG TIMER                                 */
/*---------------------------------------------------------------------------*/
/* Test the Watdog timer:                                                    */
/*                        - Interval timer mode.                             */
/*                                                                           */
/* Author(s):                                                                */
/*             - Olivier Girard,    olgirard@gmail.com                       */
/*                                                                           */
/*---------------------------------------------------------------------------*/
/* $Rev: 111 $                                                                */
/* $LastChangedBy: olivier.girard $                                          */
/* $LastChangedDate: 2011-05-20 22:39:02 +0200 (Fri, 20 May 2011) $          */
/*===========================================================================*/

.global main

.set   DMEM_BASE, (__data_start     )
.set   DMEM_200,  (__data_start+0x00)
.set   DMEM_250,  (__data_start+0x50)

.set   IE1,    0x0000
.set   IFG1,   0x0002
.set   WDTCTL, 0x0120

        
main:

        /* --------------   WATCHDOG TEST:  RD/WR ACCESS    --------------- */

        mov  &WDTCTL, r4
        mov  #0x5aff, &WDTCTL
        mov  &WDTCTL, r5
        mov  #0x5a55, &WDTCTL
        mov  &WDTCTL, r6
        mov  #0x5aaa, &WDTCTL
        mov  &WDTCTL, r7
        mov  #0x5a00, &WDTCTL
        mov  &WDTCTL, r8

        mov  #0x1000, r15

                
        /* --------------   WATCHDOG TEST:  INTERVAL MODE /64  ------------ */

        mov   #DMEM_250, r1       ;# Initialize stack & Enable interrupts
        eint
        bis.b #0x01,   &IE1

        mov   #0x5a1b, &WDTCTL    ;# Enable interval mode /64 & clear counter

        mov   #0x0000, r4
        mov   #0x0001, r5
wait_loop_64:
        inc   r4
        cmp   #0x3401, r5
        jne   wait_loop_64
        
        mov   #0x2000, r15

        

        bic.b #0x01,   &IE1       ;# Disable watchdog interrupt

        mov   #0x5a1b, &WDTCTL    ;# Enable interval mode /64 & clear counter

        mov   #0x0010, r4
        mov   #0x0002, r5
wait_loop_64_no_irq:
        dec   r4
        cmp   #0x0000, r4
        jne   wait_loop_64_no_irq

        mov    &IFG1, r6
        mov       r4, r7
        bic.b #0x01,   &IFG1      ;# Clear flag
        mov    &IFG1, r8
        
        mov   #0x2001, r15


        
        mov   #0x5a9b, &WDTCTL    ;# Enable interval mode /64 & clear counter & enable hold

        mov   #0x0020, r4
        mov   #0x0022, r5
wait_loop_64_no_irq_hold:
        dec   r4
        cmp   #0x0000, r4
        jne   wait_loop_64_no_irq_hold

        mov    &IFG1, r6
        mov       r4, r7
        
        mov   #0x2002, r15


                
        mov   #0x5a1b, &WDTCTL    ;# Enable interval mode /64 & clear counter / Check counter clear
        mov   #0x0033, r4

        mov   #0x000C, r5
wait_loop_64_no_irq_clear1:
        dec   r5
        cmp   #0x0000, r5
        jne   wait_loop_64_no_irq_clear1

        mov   #0x5a1b, &WDTCTL    ;# Clear counter
        mov    &IFG1, r6

        mov   #0x000C, r5
wait_loop_64_no_irq_clear2:
        dec   r5
        cmp   #0x0000, r5
        jne   wait_loop_64_no_irq_clear2

        mov    &IFG1, r7          ;# Don't Clear counter

        mov   #0x000C, r5
wait_loop_64_no_irq_clear3:
        dec   r5
        cmp   #0x0000, r5
        jne   wait_loop_64_no_irq_clear3

        mov    &IFG1,   r8
        bic.b  #0x01,   &IFG1     ;# Clear flag

        
        mov   #0x2003, r15


        /* --------------   WATCHDOG TEST:  INTERVAL MODE /512  ------------ */

        mov   #DMEM_250, r1       ;# Initialize stack & Enable interrupts
        eint
        bis.b #0x01,   &IE1

        mov   #0x5a1a, &WDTCTL    ;# Enable interval mode /512 & clear counter

        mov   #0x0000, r4
        mov   #0x0003, r5
wait_loop_512:
        inc   r4
        cmp   #0x3403, r5
        jne   wait_loop_512
        
        mov   #0x3000, r15

        
        /* --------------   WATCHDOG TEST:  INTERVAL MODE /8192  ------------ */

        mov   #DMEM_250, r1       ;# Initialize stack & Enable interrupts
        eint
        bis.b #0x01,   &IE1

        mov   #0x5a19, &WDTCTL    ;# Enable interval mode /8192 & clear counter

        mov   #0x0000, r4
        mov   #0x0004, r5
wait_loop_8192:
        inc   r4
        cmp   #0x3404, r5
        jne   wait_loop_8192
        
        mov   #0x4000, r15


        
        /* --------------   WATCHDOG TEST:  INTERVAL MODE /32768  ------------ */

        mov   #DMEM_250, r1       ;# Initialize stack & Enable interrupts
        eint
        bis.b #0x01,   &IE1

        mov   #0x5a18, &WDTCTL    ;# Enable interval mode /32768 & clear counter

        mov   #0x0000, r4
        mov   #0x0005, r5
wait_loop_32768:
        inc   r4
        cmp   #0x3405, r5
        jne   wait_loop_32768
        
        mov   #0x5000, r15


        

        /* ----------------------         END OF TEST        --------------- */
end_of_test:
        nop
        br #0xffff


        /* ----------------------      INTERRUPT ROUTINES    --------------- */

WDOG_VECTOR:
        bis  #0x3400, r5
        mov    &IFG1, r6
        mov       r4, r7
        reti


        /* ----------------------         INTERRUPT VECTORS  --------------- */

.section .vectors, "a"
.word end_of_test  ; Interrupt  0 (lowest priority)    <unused>
.word end_of_test  ; Interrupt  1                      <unused>
.word end_of_test  ; Interrupt  2                      <unused>
.word end_of_test  ; Interrupt  3                      <unused>
.word end_of_test  ; Interrupt  4                      <unused>
.word end_of_test  ; Interrupt  5                      <unused>
.word end_of_test  ; Interrupt  6                      <unused>
.word end_of_test  ; Interrupt  7                      <unused>
.word end_of_test  ; Interrupt  8                      <unused>
.word end_of_test  ; Interrupt  9                      <unused>
.word WDOG_VECTOR  ; Interrupt 10                      Watchdog timer
.word end_of_test  ; Interrupt 11                      <unused>
.word end_of_test  ; Interrupt 12                      <unused>
.word end_of_test  ; Interrupt 13                      <unused>
.word end_of_test  ; Interrupt 14                      NMI
.word main         ; Interrupt 15 (highest priority)   RESET

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.