OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [core-aout.c] - Rev 1765

Compare with Previous | Blame | View Log

/* Extract registers from a "standard" core file, for GDB.
   Copyright (C) 1988-1998  Free Software Foundation, Inc.
 
   This file is part of GDB.
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
 
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place - Suite 330,
   Boston, MA 02111-1307, USA.  */
 
/* Typically used on systems that have a.out format executables.
   corefile.c is supposed to contain the more machine-independent
   aspects of reading registers from core files, while this file is
   more machine specific.  */
 
#include "defs.h"
 
#ifdef HAVE_PTRACE_H
#include <ptrace.h>
#else
#ifdef HAVE_SYS_PTRACE_H
#include <sys/ptrace.h>
#endif
#endif
 
#include <sys/types.h>
#include <sys/param.h>
#include "gdbcore.h"
#include "value.h"		/* For supply_register.  */
#include "inferior.h"		/* For ARCH_NUM_REGS. */
 
/* These are needed on various systems to expand REGISTER_U_ADDR.  */
#ifndef USG
#include <sys/dir.h>
#include <sys/file.h>
#include "gdb_stat.h"
#include <sys/user.h>
#endif
 
#ifndef CORE_REGISTER_ADDR
#define CORE_REGISTER_ADDR(regno, regptr) register_addr(regno, regptr)
#endif /* CORE_REGISTER_ADDR */
 
#ifdef NEED_SYS_CORE_H
#include <sys/core.h>
#endif
 
static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
 
void _initialize_core_aout PARAMS ((void));
 
/* Extract the register values out of the core file and store
   them where `read_register' will find them.
 
   CORE_REG_SECT points to the register values themselves, read into memory.
   CORE_REG_SIZE is the size of that area.
   WHICH says which set of registers we are handling (0 = int, 2 = float
   on machines where they are discontiguous).
   REG_ADDR is the offset from u.u_ar0 to the register values relative to
   core_reg_sect.  This is used with old-fashioned core files to
   locate the registers in a large upage-plus-stack ".reg" section.
   Original upage address X is at location core_reg_sect+x+reg_addr.
 */
 
static void
fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
     char *core_reg_sect;
     unsigned core_reg_size;
     int which;
     CORE_ADDR reg_addr;
{
  int regno;
  CORE_ADDR addr;
  int bad_reg = -1;
  CORE_ADDR reg_ptr = -reg_addr;	/* Original u.u_ar0 is -reg_addr. */
  int numregs = ARCH_NUM_REGS;
 
  /* If u.u_ar0 was an absolute address in the core file, relativize it now,
     so we can use it as an offset into core_reg_sect.  When we're done,
     "register 0" will be at core_reg_sect+reg_ptr, and we can use
     CORE_REGISTER_ADDR to offset to the other registers.  If this is a modern
     core file without a upage, reg_ptr will be zero and this is all a big
     NOP.  */
  if (reg_ptr > core_reg_size)
    reg_ptr -= KERNEL_U_ADDR;
 
  for (regno = 0; regno < numregs; regno++)
    {
      addr = CORE_REGISTER_ADDR (regno, reg_ptr);
      if (addr >= core_reg_size
	  && bad_reg < 0)
	bad_reg = regno;
      else
	supply_register (regno, core_reg_sect + addr);
    }
 
  if (bad_reg >= 0)
    error ("Register %s not found in core file.", REGISTER_NAME (bad_reg));
}
 
 
#ifdef REGISTER_U_ADDR
 
/* Return the address in the core dump or inferior of register REGNO.
   BLOCKEND is the address of the end of the user structure.  */
 
CORE_ADDR
register_addr (regno, blockend)
     int regno;
     CORE_ADDR blockend;
{
  CORE_ADDR addr;
 
  if (regno < 0 || regno >= ARCH_NUM_REGS)
    error ("Invalid register number %d.", regno);
 
  REGISTER_U_ADDR (addr, blockend, regno);
 
  return addr;
}
 
#endif /* REGISTER_U_ADDR */

 
/* Register that we are able to handle aout (trad-core) file formats.  */
 
static struct core_fns aout_core_fns =
{
  bfd_target_unknown_flavour,		/* core_flavour */
  default_check_format,			/* check_format */
  default_core_sniffer,			/* core_sniffer */
  fetch_core_registers,			/* core_read_registers */
  NULL					/* next */
};
 
void
_initialize_core_aout ()
{
  add_core_fns (&aout_core_fns);
}
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.