URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rtems-20020807/] [aclocal.m4] - Rev 1773
Go to most recent revision | Compare with Previous | Blame | View Log
# aclocal.m4 generated automatically by aclocal 1.6.2 -*- Autoconf -*-
# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
dnl RTEMS_ARG_VAR(VAR,HELP-STRING)
dnl An internal macros to have help strings pretty
dnl printed with configure --help, without letting autoconf spoil config subdir
dnl environments by trying to propagate them
dnl Stripped down version of autoconf-2.52's AC_ARG_VAR.
AC_DEFUN([_RTEMS_ARG_VAR],
[
m4_expand_once([m4_divert_once([HELP_VAR],
[AC_HELP_STRING([$1], [$2], [ ])])],
[$0($1)])dnl
])
AC_DEFUN([_RTEMS_SUBST_IFNOT],
[AS_IF([`echo " [$]$1 " | grep " $2 " > /dev/null`],
[],
[AC_SUBST([$1],["[$]$1 $2"])])
])
AC_DEFUN([_RTEMS_COMMANDS_POST_CONFIG_SUBDIRS],
[
AC_CONFIG_COMMANDS_PRE([
_RTEMS_BUILD_CONFIG_PREPARE
_RTEMS_HOST_CONFIG_PREPARE
_RTEMS_TARGET_CONFIG_PREPARE
AS_IF([test $build = $host],
[
AS_IF([test $host = $target],
[dnl b=h, h=t, t=b
BUILD_SUBDIRS="${build_configdirs}"
build_configdirs="${build_configdirs}"
HOST_SUBDIRS=""
host_configdirs=""
TARGET_SUBDIRS=""
target_configdirs=""],
[dnl b=h, h!=t, t!=b
BUILD_SUBDIRS="${build_configdirs}"
build_configdirs="${build_configdirs}"
HOST_SUBDIRS=""
host_configdirs=""
TARGET_SUBDIRS=`echo "${target_configdirs}" | \
sed -e "s%\([[^ ]][[^ ]]*\)%$target_alias/\1%g"`
target_configdirs="${target_configdirs}"
])
],[
AS_IF([test $host = $target],
[ dnl b!=h, h=t, b!=t
BUILD_SUBDIRS="${build_configdirs}"
build_configdirs="${build_configdirs}"
HOST_SUBDIRS=`echo "${host_configdirs}" | \
sed -e "s%\([[^ ]][[^ ]]*\)%$host_alias/\1%g"`
host_configdirs="${host_configdirs}"
TARGET_SUBDIRS=""
target_configdirs=""],
[
AS_IF([test $build = $target],
[dnl b!=h, h!=t, b=t
BUILD_SUBDIRS="${build_configdirs}"
build_configdirs="${build_configdirs}"
HOST_SUBDIRS=`echo "${host_configdirs}" | \
sed -e "s%\([[^ ]][[^ ]]*\)%$host_alias/\1%g"`
host_configdirs="${host_configdirs}"
TARGET_SUBDIRS=""
target_configdirs=""],
[dnl b!=h, h!=t, b!=t
BUILD_SUBDIRS="${build_configdirs}"
build_configdirs="${build_configdirs}"
HOST_SUBDIRS=`echo "${host_configdirs}" | \
sed -e "s%\([[^ ]][[^ ]]*\)%$host_alias/\1%g"`
host_configdirs="${host_configdirs}"
TARGET_SUBDIRS=`echo "${target_configdirs}" | \
sed -e "s%\([[^ ]][[^ ]]*\)%$target_alias/\1%g"`
target_configdirs="${target_configdirs}"
])
])
])
AC_SUBST(HOST_SUBDIRS)
AC_SUBST(TARGET_SUBDIRS)
AC_SUBST(BUILD_SUBDIRS)
])
AC_CONFIG_COMMANDS_POST([
_RTEMS_OUTPUT_SUBDIRS([build],[BUILD])
_RTEMS_OUTPUT_SUBDIRS([host],[HOST])
_RTEMS_OUTPUT_SUBDIRS([target],[TARGET])
])
])
dnl _RTEMS_SRCPATHS(BUILD-DIR-NAME)
dnl ----------------------------
dnl Inputs:
dnl - BUILD-DIR-NAME is `top-build -> build' and `top-src -> src'
dnl - `$srcdir' is `top-build -> top-src'
dnl
dnl Outputs:
dnl - `ac_builddir' is `.', for symmetry only.
dnl - `ac_top_builddir' is `build -> top_build'.
dnl If not empty, has a trailing slash.
dnl - `ac_srcdir' is `build -> src'.
dnl - `ac_top_srcdir' is `build -> top-src'.
dnl
dnl and `ac_buildpath' etc., the absolute paths.
m4_define([_RTEMS_SRCPATHS],
[
m4_if([$2],,
[dstdir=$1],
[case "$2" in
"." | "" ) # No subdir was given
dstdir=$1;;
* ) # A subdir was given
dstdir=$2/$1;;
esac])
ac_builddir=.
AS_IF([test $dstdir != .],
[ # Strip off leading ./
ac_builddir_suffix=/`echo $dstdir | sed 's,^\.[[\\/]],,'`
ac_srcdir_suffix=/`echo $1 | sed 's,^\.[[\\/]],,'`
# A "../" for each directory in $ac_dir_suffix.
ac_top_builddir=`echo "$ac_builddir_suffix" | sed 's,/[[^\\/]]*,../,g'`
],[
ac_dir_suffix= ac_top_builddir=
])
case $srcdir in
.) # No --srcdir option. We are building in place.
ac_srcdir=.
if test -z "$ac_top_builddir"; then
ac_top_srcdir=.
else
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
fi ;;
[[\\/]]* | ?:[[\\/]]* ) # Absolute path.
ac_srcdir=$srcdir$ac_srcdir_suffix;
ac_top_srcdir=$srcdir;
;;
*) # Relative path.
ac_srcdir=$ac_top_builddir$srcdir$ac_srcdir_suffix;
ac_top_srcdir=$ac_top_builddir$srcdir;
;;
esac
dnl Don't blindly perform a `cd $1/$ac_foo && pwd` since $ac_foo can be
dnl absolute.
ac_buildpath=`cd $dstdir && cd $ac_builddir && pwd`
ac_top_buildpath=`cd $dstdir && cd $ac_top_builddir && pwd`
ac_srcpath=`cd $dstdir && cd $ac_srcdir && pwd`
ac_top_srcpath=`cd $dstdir && cd $ac_top_srcdir && pwd`
])# _AC_SRCPATHS
dnl _RTEMS_OUTPUT_SUBDIRS([host|target|build],[HOST|TARGET|BUILD])
AC_DEFUN([_RTEMS_OUTPUT_SUBDIRS],[
m4_ifdef([_RTEMS_$2_CONFIGDIRS_LIST],
[
_RTEMS_ARG_VAR([CC_FOR_$2],
[c-compiler to be used for $1 subdirs (default: auto-detected)])
_RTEMS_ARG_VAR([CFLAGS_FOR_$2],
[c-flags to be used for $1 subdirs (default: provided by autoconf)])
if test "$no_recursion" != yes; then
if test -n "${$2_SUBDIRS}"; then
ac_sub_configure_args=
ac_prev=
for ac_arg in $$1args; do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case $ac_arg in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
| --c=*)
;;
--config-cache | -C)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
;;
*) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
esac
done
# Always prepend --prefix to ensure using the same prefix
# in subdir configurations.
ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"
case "$$1_subdir" in
"." ) ;;
* )
ac_sub_configure_args="$ac_sub_configure_args --with-target-subdir=$$1_subdir --exec-prefix=${prefix}/$$1_subdir"
;;
esac
# make sure that $1_subdir is not empty
test -n "$$1_subdir" || $1_subdir="."
ac_popdir=`pwd`
for ac_dir in $$1_configdirs; do
# Do not complain, so a configure script can configure whichever
# parts of a large source tree are present.
test -d $srcdir/$ac_dir || continue
AC_MSG_NOTICE([configuring in $$1_subdir/$ac_dir])
AS_MKDIR_P(["$$1_subdir/$ac_dir"])
_RTEMS_SRCPATHS(["$ac_dir"],["$$1_subdir"])
cd $$1_subdir/$ac_dir
# Check for guested configure; otherwise get Cygnus style configure.
if test -f $ac_srcdir/configure.gnu; then
ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
elif test -f $ac_srcdir/configure; then
ac_sub_configure="$SHELL '$ac_srcdir/configure'"
elif test -f $ac_srcdir/configure.in; then
ac_sub_configure=$ac_configure
else
AC_MSG_WARN([no configuration information is in $ac_dir])
ac_sub_configure=
fi
# The recursion is here.
if test -n "$ac_sub_configure"; then
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[[\\/]]* | ?:[[\\/]]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative path.
ac_sub_cache_file=$ac_top_builddir$cache_file ;;
esac
AC_MSG_NOTICE([running $ac_sub_configure $ac_sub_configure_args \
--cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir])
# The eval makes quoting arguments work.
ac_sub_configure_vars=
test -n "[$]CC_FOR_$2" && \
ac_sub_configure_vars="CC='[$]CC_FOR_$2'"
test -n "[$]CFLAGS_FOR_$2" && \
ac_sub_configure_vars="$ac_sub_configure_vars CFLAGS='[$]CFLAGS_FOR_$2'"
eval $ac_sub_configure_vars \
$ac_sub_configure $ac_sub_configure_args \
--cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
AC_MSG_ERROR([$ac_sub_configure failed for $ac_dir])
fi
cd $ac_popdir
done
fi
fi
])
])
# subdirs to be built for the build environment
AC_DEFUN([RTEMS_BUILD_CONFIG_SUBDIRS],[
m4_append([_RTEMS_BUILD_CONFIGDIRS_LIST],[ $1])
dnl Always append to build_configdirs
AC_SUBST(build_configdirs,"$build_configdirs $1")
m4_divert_text([DEFAULTS],
[ac_subdirs_all="$ac_subdirs_all m4_normalize([$1])"])
m4_expand_once([_RTEMS_COMMANDS_POST_CONFIG_SUBDIRS])
])
AC_DEFUN(_RTEMS_BUILD_CONFIG_PREPARE,[
# Record the configure arguments in Makefile.
m4_ifdef([_RTEMS_BUILD_CONFIGDIRS_LIST],
[
buildargs=`echo "${ac_configure_args}" | \
sed -e 's/--no[[^ ]]*//' \
-e 's/--cache[[a-z-]]*=[[^ ]]*//' \
-e 's/--ho[[a-z-]]*=[[^ ]]*//' \
-e 's/--bu[[a-z-]]*=[[^ ]]*//' \
-e 's/--ta[[a-z-]]*=[[^ ]]*//' \
-e 's/[[^ ]]*alias=[[^ ]]*//g'` ;
buildargs="--host=${build} --build=${build} --target=${target_alias} ${buildargs}"
AC_SUBST(buildargs)
build_subdir="."
],[])
])
# subdirs to be build for the host environment
AC_DEFUN([RTEMS_HOST_CONFIG_SUBDIRS],[
m4_append([_RTEMS_HOST_CONFIGDIRS_LIST],[ $1])dnl
if test $build = $host;
then
if test $host = $target;
then
_RTEMS_SUBST_IFNOT([build_configdirs],[$1])
else
_RTEMS_SUBST_IFNOT([build_configdirs],[$1])
fi
else
if test $host = $target;
then
_RTEMS_SUBST_IFNOT([host_configdirs],[$1])
else
if test $build = $target;
then
_RTEMS_SUBST_IFNOT([host_configdirs],[$1])
else
_RTEMS_SUBST_IFNOT([host_configdirs],[$1])
fi
fi
fi
m4_divert_text([DEFAULTS],
[ac_subdirs_all="$ac_subdirs_all m4_normalize([$1])"])
m4_expand_once([_RTEMS_COMMANDS_POST_CONFIG_SUBDIRS])
])
AC_DEFUN(_RTEMS_HOST_CONFIG_PREPARE,[
m4_ifdef([_RTEMS_HOST_CONFIGDIRS_LIST],
[
# Record configure arguments in Makefile.
hostargs=`echo "${ac_configure_args}" | \
sed -e 's/--no[[^ ]]*//' \
-e 's/--cache[[a-z-]]*=[[^ ]]*//' \
-e 's/--ho[[a-z-]]*=[[^ ]]*//' \
-e 's/--bu[[a-z-]]*=[[^ ]]*//' \
-e 's/--ta[[a-z-]]*=[[^ ]]*//' \
-e 's/[[^ ]]*alias=[[^ ]]*//g'` ;
hostargs="--host=${host_alias} --build=${build} --target=${target_alias} ${hostargs}"
AC_SUBST(hostargs)
host_subdir="${host_alias}"
],[])
])
# subdirs to be build for the target environment
AC_DEFUN([RTEMS_TARGET_CONFIG_SUBDIRS],[
m4_append([_RTEMS_TARGET_CONFIGDIRS_LIST],[ $1])
if test $build = $host;
then
if test $host = $target;
then
_RTEMS_SUBST_IFNOT([build_configdirs],[$1])
else
_RTEMS_SUBST_IFNOT([target_configdirs],[$1])
fi
else
if test $host = $target;
then
_RTEMS_SUBST_IFNOT([host_configdirs],[$1])
else
if test $build = $target;
then
_RTEMS_SUBST_IFNOT([build_configdirs],[$1])
else
_RTEMS_SUBST_IFNOT([target_configdirs],[$1])
fi
fi
fi
m4_divert_text([DEFAULTS],
[ac_subdirs_all="$ac_subdirs_all m4_normalize([$1])"])
m4_expand_once([_RTEMS_COMMANDS_POST_CONFIG_SUBDIRS])
])
AC_DEFUN(_RTEMS_TARGET_CONFIG_PREPARE,[
m4_ifdef([_RTEMS_TARGET_CONFIGDIRS_LIST],
[
# Record the configure arguments in Makefile.
targetargs=`echo "${ac_configure_args}" | \
sed -e 's/--no[[^ ]]*//' \
-e 's/--cache[[a-z-]]*=[[^ ]]*//' \
-e 's/--ho[[a-z-]]*=[[^ ]]*//' \
-e 's/--bu[[a-z-]]*=[[^ ]]*//' \
-e 's/--ta[[a-z-]]*=[[^ ]]*//' \
-e 's/[[^ ]]*alias=[[^ ]]*//g'` ;
targetargs="--host=${target_alias} --build=${build} --target=${target_alias} ${targetargs}"
AC_SUBST(targetargs)
target_subdir="${target_alias}"
],[])
])
dnl rtems-top.m4,v 1.14 2002/03/28 13:53:19 joel Exp
dnl
dnl RTEMS_TOP($1)
dnl
dnl $1 .. relative path from this configure.in to the toplevel configure.in
dnl
AC_DEFUN(RTEMS_TOP,
[dnl
AC_REQUIRE([RTEMS_VERSIONING])
AC_CHECK_PROGS(MAKE, gmake make)
AC_BEFORE([$0], [AC_CONFIG_AUX_DIR])dnl
AC_BEFORE([$0], [AM_INIT_AUTOMAKE])dnl
AC_PREFIX_DEFAULT([/opt/rtems])
ENDIF=endif
AC_SUBST(ENDIF)
RTEMS_TOPdir="$1";
AC_SUBST(RTEMS_TOPdir)
test -n "$with_target_subdir" || with_target_subdir="."
if test "$with_target_subdir" = "." ; then
# Native
PROJECT_TOPdir=${RTEMS_TOPdir}/'$(top_builddir)'
else
# Cross
dots=`echo $with_target_subdir|\
sed -e 's%^\./%%' -e 's%[[^/]]$%&/%' -e 's%[[^/]]*/%../%g'`
PROJECT_TOPdir=${dots}${RTEMS_TOPdir}/'$(top_builddir)'
fi
AC_SUBST(PROJECT_TOPdir)
if test "$with_target_subdir" = "." ; then
# Native
PROJECT_ROOT="${RTEMS_TOPdir}/\$(top_builddir)"
else
# Cross
PROJECT_ROOT="${RTEMS_TOPdir}/\$(top_builddir)"
fi
AC_SUBST(PROJECT_ROOT)
AC_MSG_CHECKING([for RTEMS Version])
AS_IF([test -r "${srcdir}/${RTEMS_TOPdir}/aclocal/version.m4"],
[],
[AC_MSG_ERROR([Unable to find ${RTEMS_TOPdir}/aclocal/version.m4])])
AC_MSG_RESULT([_RTEMS_VERSION])
])dnl
AC_DEFUN([RTEMS_VERSIONING],
m4_define([_RTEMS_VERSION],[ss-20020807]))
# Do all the work for Automake. -*- Autoconf -*-
# This macro actually does too much some checks are only needed if
# your package does certain things. But this isn't really a big deal.
# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 8
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
AC_PREREQ([2.52])
# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
# the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
# AM_INIT_AUTOMAKE([OPTIONS])
# -----------------------------------------------
# The call with PACKAGE and VERSION arguments is the old style
# call (pre autoconf-2.50), which is being phased out. PACKAGE
# and VERSION should now be passed to AC_INIT and removed from
# the call to AM_INIT_AUTOMAKE.
# We support both call styles for the transition. After
# the next Automake release, Autoconf can make the AC_INIT
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
test -f $srcdir/config.status; then
AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
# Define the identity of the package.
dnl Distinguish between old-style and new-style calls.
m4_ifval([$2],
[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl
AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl
_AM_IF_OPTION([no-define],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_MISSING_PROG(AMTAR, tar)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
_AM_IF_OPTION([no-dependencies],,
[AC_PROVIDE_IFELSE([AC_PROG_][CC],
[_AM_DEPENDENCIES(CC)],
[define([AC_PROG_][CC],
defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_][CXX],
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_][CXX],
defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])
])
# Copyright 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# AM_AUTOMAKE_VERSION(VERSION)
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"])
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
# Call AM_AUTOMAKE_VERSION so it can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.6.2])])
# Helper functions for option handling. -*- Autoconf -*-
# Copyright 2001, 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 2
# _AM_MANGLE_OPTION(NAME)
# -----------------------
AC_DEFUN([_AM_MANGLE_OPTION],
[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
# _AM_SET_OPTION(NAME)
# ------------------------------
# Set option NAME. Presently that only means defining a flag for this option.
AC_DEFUN([_AM_SET_OPTION],
[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
# _AM_SET_OPTIONS(OPTIONS)
# ----------------------------------
# OPTIONS is a space-separated list of Automake options.
AC_DEFUN([_AM_SET_OPTIONS],
[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
# -------------------------------------------
# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
#
# Check to make sure that the build environment is sane.
#
# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 3
# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$[*]" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$[*]" != "X $srcdir/configure conftest.file" \
&& test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
alias in your environment])
fi
test "$[2]" = conftest.file
)
then
# Ok.
:
else
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])
# -*- Autoconf -*-
# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 3
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])
# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
AC_MSG_WARN([`missing' script is too old or missing])
fi
])
# AM_AUX_DIR_EXPAND
# Copyright 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory. The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run. This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
# fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
# fails if $ac_aux_dir is absolute,
# fails when called from a subdirectory in a VPATH build with
# a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir. In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
# MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH. The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.
# Rely on autoconf to set up CDPATH properly.
AC_PREREQ([2.50])
AC_DEFUN([AM_AUX_DIR_EXPAND], [
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])
# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
# Copyright 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# AM_PROG_INSTALL_STRIP
# Copyright 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries. This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
# serial 4 -*- Autoconf -*-
# Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery. Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
# _AM_DEPENDENCIES(NAME)
# ----------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX", "GCJ", or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
AC_CACHE_CHECK([dependency style of $depcc],
[am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
am_cv_$1_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
fi
for depmode in $am_compiler_list; do
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
echo '#include "conftest.h"' > conftest.c
echo 'int i;' > conftest.h
echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
case $depmode in
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
none) break ;;
esac
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this.
if depmode=$depmode \
source=conftest.c object=conftest.o \
depfile=conftest.Po tmpdepfile=conftest.TPo \
$SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
grep conftest.h conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
am_cv_$1_dependencies_compiler_type=$depmode
break
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_$1_dependencies_compiler_type=none
fi
])
AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
])
# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[rm -f .deps 2>/dev/null
mkdir .deps 2>/dev/null
if test -d .deps; then
DEPDIR=.deps
else
# MS-DOS does not allow filenames that begin with a dot.
DEPDIR=_deps
fi
rmdir .deps 2>/dev/null
AC_SUBST([DEPDIR])
])
# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[ --disable-dependency-tracking Speeds up one-time builds
--enable-dependency-tracking Do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
AC_SUBST([AMDEPBACKSLASH])
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
#serial 2
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
[for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# So let's grep whole file.
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
fi
grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
# Extract the definition of DEP_FILES from the Makefile without
# running `make'.
DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
test -z "$DEPDIR" && continue
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n -e '/^U = / s///p' < "$mf"`
test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
# We invoke sed twice because it is the simplest approach to
# changing $(DEPDIR) to its actual value in the expansion.
for file in `sed -n -e '
/^DEP_FILES = .*\\\\$/ {
s/^DEP_FILES = //
:loop
s/\\\\$//
p
n
/\\\\$/ b loop
p
}
/^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`AS_DIRNAME(["$file"])`
AS_MKDIR_P([$dirpart/$fdir])
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
# AM_OUTPUT_DEPENDENCY_COMMANDS
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
# This code is only required when automatic dependency tracking
# is enabled. FIXME. This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
# Copyright 2001 Free Software Foundation, Inc. -*- Autoconf -*-
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 2
# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
doit:
@echo done
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
am__include=include
am__quote=
_am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
am__include=.include
am__quote="\""
_am_result=BSD
fi
fi
AC_SUBST(am__include)
AC_SUBST(am__quote)
AC_MSG_RESULT($_am_result)
rm -f confinc confmf
])
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 5
AC_PREREQ(2.52)
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
AC_DEFUN([AM_CONDITIONAL],
[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
$1_TRUE=
$1_FALSE='#'
else
$1_TRUE='#'
$1_FALSE=
fi
AC_CONFIG_COMMANDS_PRE(
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
AC_MSG_ERROR([conditional \"$1\" was never defined.
Usually this means the macro was only invoked conditionally.])
fi])])
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering
# Copyright 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# serial 1
AC_DEFUN([AM_MAINTAINER_MODE],
[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
dnl maintainer-mode is disabled by default
AC_ARG_ENABLE(maintainer-mode,
[ --enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer],
USE_MAINTAINER_MODE=$enableval,
USE_MAINTAINER_MODE=no)
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
]
)
dnl enable-multiprocessing.m4,v 1.5 2002/06/30 06:27:36 ralf Exp
AC_DEFUN(RTEMS_ENABLE_MULTIPROCESSING,
[
AC_ARG_ENABLE(multiprocessing,
AC_HELP_STRING([--enable-multiprocessing],[enable multiprocessing interface]),
[case "${enable_multiprocessing}" in
yes) ;;
no) ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-multiprocessing option) ;;
esac],[enable_multiprocessing=no])
])
dnl enable-posix.m4,v 1.11 2001/09/13 13:14:30 joel Exp
AC_DEFUN(RTEMS_ENABLE_POSIX,
[
AC_ARG_ENABLE(posix,
AC_HELP_STRING([--enable-posix],[enable posix interface]),
[case "${enableval}" in
yes) RTEMS_HAS_POSIX_API=yes ;;
no) RTEMS_HAS_POSIX_API=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-posix option) ;;
esac],[RTEMS_HAS_POSIX_API=yes])
case "${host}" in
# hpux unix port should go here
i[[34567]]86-pc-linux*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
i[[34567]]86-*freebsd*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
no_cpu-*rtems*)
RTEMS_HAS_POSIX_API=no
;;
sparc-sun-solaris*) # unix "simulator" port
RTEMS_HAS_POSIX_API=no
;;
*)
;;
esac
AC_SUBST(RTEMS_HAS_POSIX_API)
])
dnl enable-itron.m4,v 1.8 2001/09/13 13:14:30 joel Exp
AC_DEFUN(RTEMS_ENABLE_ITRON,
[
AC_ARG_ENABLE(itron,
AC_HELP_STRING([--enable-itron],[enable itron interface]),
[case "${enableval}" in
yes) RTEMS_HAS_ITRON_API=yes ;;
no) RTEMS_HAS_ITRON_API=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-itron option) ;;
esac],[RTEMS_HAS_ITRON_API=yes])
case "${host}" in
# hpux unix port should go here
i[[34567]]86-pc-linux*) # unix "simulator" port
RTEMS_HAS_ITRON_API=no
;;
i[[34567]]86-*freebsd*) # unix "simulator" port
RTEMS_HAS_ITRON_API=no
;;
no_cpu-*rtems*)
RTEMS_HAS_ITRON_API=no
;;
sparc-sun-solaris*) # unix "simulator" port
RTEMS_HAS_ITRON_API=no
;;
*)
;;
esac
AC_SUBST(RTEMS_HAS_ITRON_API)
])
dnl enable-networking.m4,v 1.6 2001/09/13 13:14:30 joel Exp
AC_DEFUN(RTEMS_ENABLE_NETWORKING,
[
AC_ARG_ENABLE(networking,
AC_HELP_STRING([--enable-networking],[enable TCP/IP stack]),
[case "${enableval}" in
yes) RTEMS_HAS_NETWORKING=yes ;;
no) RTEMS_HAS_NETWORKING=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-networking option) ;;
esac],[RTEMS_HAS_NETWORKING=yes])
AC_SUBST(RTEMS_HAS_NETWORKING)dnl
])
dnl enable-rdbg.m4,v 1.5 2001/09/13 13:14:30 joel Exp
AC_DEFUN(RTEMS_ENABLE_RDBG,
[
AC_BEFORE([$0], [RTEMS_CHECK_RDBG])dnl
AC_ARG_ENABLE(rdbg,
AC_HELP_STRING([--enable-rdbg],[enable remote debugger]),
[case "${enableval}" in
yes) RTEMS_HAS_RDBG=yes ;;
no) RTEMS_HAS_RDBG=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-rdbg option) ;;
esac],[RTEMS_HAS_RDBG=no])
AC_SUBST(RTEMS_HAS_RDBG)dnl
])
dnl check-rdbg.m4,v 1.9 2001/10/17 20:30:38 joel Exp
dnl
AC_DEFUN(RTEMS_CHECK_RDBG,
[dnl
AC_REQUIRE([RTEMS_TOP])dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_REQUIRE([RTEMS_CHECK_NETWORKING])dnl
AC_REQUIRE([RTEMS_ENABLE_RDBG])dnl
AC_CACHE_CHECK([whether BSP supports librdbg],
rtems_cv_HAS_RDBG,
[
if test -d "$srcdir/${RTEMS_TOPdir}/c/src/librdbg/src/${RTEMS_CPU}/${$1}";
then
rtems_cv_HAS_RDBG="yes" ;
elif test -d "$srcdir/${RTEMS_TOPdir}/c/src/librdbg/src/${RTEMS_CPU}/any";
then
rtems_cv_HAS_RDBG="yes" ;
elif test "${RTEMS_CPU}" = "powerpc";
then
A=`grep -l RTEMS_PPC_EXCEPTION_PROCESSING_MODEL $srcdir/${RTEMS_TOPdir}/make/custom/* 2>/dev/null`;
C=""
for i in ${A} ;
do
B=`basename ${i} .cfg`;
C="${C} ${B}";
done
rtems_cv_HAS_RDBG="no";
for j in ${C} ;
do
if test "${$1}" = "${j}" ;
then
rtems_cv_HAS_RDBG="yes";
fi
done
else
rtems_cv_HAS_RDBG="no";
fi
])
HAS_RDBG="$rtems_cv_HAS_RDBG"
AC_SUBST(HAS_RDBG)
])
dnl check-cpu.m4,v 1.6 2002/07/22 10:13:20 ralf Exp
dnl check if RTEMS support a cpu
AC_DEFUN(RTEMS_CHECK_CPU,
[dnl
AC_REQUIRE([RTEMS_TOP])
AC_REQUIRE([RTEMS_CANONICAL_TARGET_CPU])
# Is this a supported CPU?
AC_MSG_CHECKING([if cpu $RTEMS_CPU is supported])
# FIXME: Temporary hack
if test -d "$srcdir/$RTEMS_TOPdir/cpukit/score/cpu/$RTEMS_CPU"; then
AC_MSG_RESULT(yes)
else
AC_MSG_ERROR(no)
fi
])dnl
dnl
dnl canonical-target-name.m4,v 1.12 2001/09/14 17:30:22 joel Exp
dnl
dnl canonicalize target cpu
dnl NOTE: Most rtems targets do not fullfil autoconf's
dnl target naming conventions "processor-vendor-os"
dnl Therefore autoconf's AC_CANONICAL_TARGET will fail for them
dnl and we have to fix it for rtems ourselves
AC_DEFUN(RTEMS_CANONICAL_TARGET_CPU,
[
AC_CANONICAL_TARGET
AC_MSG_CHECKING(rtems target cpu)
case "${target}" in
# hpux unix port should go here
i[[34567]]86-*linux*) # unix "simulator" port
RTEMS_CPU=unix
;;
i[[34567]]86-*freebsd*) # unix "simulator" port
RTEMS_CPU=unix
;;
i[[34567]]86-pc-cygwin*) # Cygwin is just enough unix like :)
RTEMS_CPU=unix
;;
no_cpu-*rtems*)
RTEMS_CPU=no_cpu
;;
sparc-sun-solaris*) # unix "simulator" port
RTEMS_CPU=unix
;;
*)
RTEMS_CPU=`echo $target | sed 's%^\([[^-]]*\)-\(.*\)$%\1%'`
;;
esac
AC_SUBST(RTEMS_CPU)
AC_MSG_RESULT($RTEMS_CPU)
])
dnl check-networking.m4,v 1.4 2000/11/02 15:44:04 joel Exp
dnl
AC_DEFUN(RTEMS_CHECK_NETWORKING,
[dnl
AC_REQUIRE([RTEMS_CHECK_CPU])dnl
AC_REQUIRE([RTEMS_ENABLE_NETWORKING])dnl
AC_CACHE_CHECK([whether BSP supports networking],
rtems_cv_HAS_NETWORKING,
[dnl
case "$RTEMS_CPU" in
unix*)
rtems_cv_HAS_NETWORKING="no"
;;
*)
if test "${RTEMS_HAS_NETWORKING}" = "yes"; then
rtems_cv_HAS_NETWORKING="yes";
else
rtems_cv_HAS_NETWORKING="disabled";
fi
;;
esac])
if test "$rtems_cv_HAS_NETWORKING" = "yes"; then
HAS_NETWORKING="yes";
else
HAS_NETWORKING="no";
fi
AC_SUBST(HAS_NETWORKING)dnl
])
dnl enable-inlines.m4,v 1.6 2001/09/13 13:14:30 joel Exp
AC_DEFUN(RTEMS_ENABLE_INLINES,
[AC_ARG_ENABLE(rtems-inlines,
AC_HELP_STRING([--enable-rtems-inlines],[enable RTEMS inline functions (default:enabled, disable to use macros)]),
[case "${enableval}" in
yes) RTEMS_USE_MACROS=no ;;
no) RTEMS_USE_MACROS=yes ;;
*) AC_MSG_ERROR(bad value ${enableval} for disable-rtems-inlines option) ;;
esac],[RTEMS_USE_MACROS=no])
AC_SUBST(RTEMS_USE_MACROS)dnl
if test x"${RTEMS_USE_MACROS}" = x"yes";
then
AC_DEFINE_UNQUOTED(USE_MACROS,1,[if using macros])
else
AC_DEFINE_UNQUOTED(USE_INLINES,1,[if using inlines])
fi
])
dnl enable-cxx.m4,v 1.3 2001/09/13 13:14:30 joel Exp
AC_DEFUN(RTEMS_ENABLE_CXX,
[
AC_ARG_ENABLE(cxx,
AC_HELP_STRING([--enable-cxx],[enable C++ support and build the rtems++
library]),
[case "${enableval}" in
yes) RTEMS_HAS_CPLUSPLUS=yes ;;
no) RTEMS_HAS_CPLUSPLUS=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for enable-cxx option) ;;
esac], [RTEMS_HAS_CPLUSPLUS=no])
])
dnl enable-tests.m4,v 1.5 2001/09/13 13:14:30 joel Exp
AC_DEFUN(RTEMS_ENABLE_TESTS,
[
# If the tests are enabled, then find all the test suite Makefiles
AC_MSG_CHECKING([if the test suites are enabled? ])
AC_ARG_ENABLE(tests,
AC_HELP_STRING([--enable-tests],[enable tests (default:disabled)]),
[case "${enableval}" in
yes) tests_enabled=yes ;;
no) tests_enabled=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for tests option) ;;
esac], [tests_enabled=no])
AC_MSG_RESULT([$tests_enabled])
])
AC_DEFUN(RTEMS_ENABLE_RTEMS_DEBUG,
[
AC_ARG_ENABLE(rtems-debug,
AC_HELP_STRING([--enable-rtems-debug],[enable RTEMS_DEBUG]),
[case "${enable_rtems_debug}" in
yes) enable_rtems_debug=yes ;;
no) enable_rtems_debug=no ;;
*) AC_MSG_ERROR([bad value ${enable_rtems_debug} for RTEMS_DEBUG]) ;;
esac],[enable_rtems_debug=no])
])
AC_DEFUN(RTEMS_CHECK_RTEMS_DEBUG,
[AC_REQUIRE([RTEMS_ENABLE_RTEMS_DEBUG])
AS_IF([test x"${enable_rtems_debug}" = x"yes"]
[AC_DEFINE_UNQUOTED(RTEMS_DEBUG,1,[if RTEMS_DEBUG is enabled])])
])
dnl enable-rtemsbsp.m4,v 1.10 2001/09/13 13:14:30 joel Exp
dnl Override the set of BSPs to be built.
dnl used by the toplevel configure script
dnl RTEMS_ENABLE_RTEMSBSP(rtems_bsp_list)
AC_DEFUN(RTEMS_ENABLE_RTEMSBSP,
[
AC_BEFORE([$0], [RTEMS_ENV_RTEMSBSP])dnl
AC_ARG_ENABLE(rtemsbsp,
AC_HELP_STRING([--enable-rtemsbsp="bsp1 bsp2 .."],
[BSPs to include in build]),
[case "${enableval}" in
yes|no) AC_MSG_ERROR([missing argument to --enable-rtemsbsp=\"bsp1 bsp2\"]);;
*) $1=$enableval;;
esac],[$1=""])
])
dnl env-rtemsbsp.m4,v 1.7 2002/08/06 07:31:47 ralf Exp
dnl Pass a single BSP via an environment variable
dnl used by per BSP configure scripts
AC_DEFUN(RTEMS_ENV_RTEMSBSP,
[dnl
AC_BEFORE([$0], [RTEMS_ENABLE_RTEMSBSP])dnl
AC_BEFORE([$0], [RTEMS_PROJECT_ROOT])dnl
AC_BEFORE([$0], [RTEMS_CHECK_CUSTOM_BSP])dnl
AC_ARG_VAR([RTEMS_BSP],[RTEMS_BSP to build])
AC_MSG_CHECKING([for RTEMS_BSP])
AC_CACHE_VAL(rtems_cv_RTEMS_BSP,
[dnl
test -n "${RTEMS_BSP}" && rtems_cv_RTEMS_BSP="$RTEMS_BSP";
])dnl
if test -z "$rtems_cv_RTEMS_BSP"; then
AC_MSG_ERROR([Missing RTEMS_BSP])
fi
RTEMS_BSP="$rtems_cv_RTEMS_BSP"
AC_MSG_RESULT(${RTEMS_BSP})
AC_SUBST(RTEMS_BSP)
RTEMS_BSP_SPECS="-specs bsp_specs -qrtems"
AC_SUBST(RTEMS_BSP_SPECS)
GCC_SPECS="-B\$(PROJECT_ROOT)/lib/ -B\$(PROJECT_ROOT)/$RTEMS_BSP/lib/"
AC_SUBST(GCC_SPECS)
PROJECT_INCLUDE="\$(PROJECT_ROOT)/$RTEMS_BSP/lib/include"
AC_SUBST(PROJECT_INCLUDE)
PROJECT_RELEASE="\$(PROJECT_ROOT)/$RTEMS_BSP"
AC_SUBST(PROJECT_RELEASE)
RTEMS_ROOT=$PROJECT_ROOT/c/$RTEMS_BSP
AC_SUBST(RTEMS_ROOT)
RTEMS_ENABLE_BARE
AC_SUBST(BARE_CPU_MODEL)
AC_SUBST(BARE_CPU_CFLAGS)
AM_CONDITIONAL([MULTILIB],[false])
includedir="\${exec_prefix}/${RTEMS_BSP}/lib/include"
libdir="\${exec_prefix}/${RTEMS_BSP}/lib"
bsplibdir="\${exec_prefix}/${RTEMS_BSP}/lib"
AC_SUBST(bsplibdir)
])
dnl
dnl project-root.m4,v 1.6 2001/12/20 17:33:23 joel Exp
dnl
dnl
dnl PROJECT_TOPdir .. relative path to the top of the build-tree
dnl PROJECT_ROOT .. relative path to the top of the temporary
dnl installation directory inside the build-tree
dnl RTEMS_TOPdir .. relative path of a subpackage's configure.in to the
dnl toplevel configure.in of the source-tree
dnl RTEMS_ROOT .. path to the top of a bsp's build directory
dnl [Applied by custom/*.cfg, depredicated otherwise]
dnl
AC_DEFUN(RTEMS_PROJECT_ROOT,
[dnl
AC_REQUIRE([RTEMS_TOP])
PACKHEX="\$(PROJECT_TOPdir)/tools/build/packhex"
AC_SUBST(PACKHEX)
])
dnl check-bsps.m4,v 1.18 2001/11/21 18:36:51 joel Exp
dnl Report all available bsps for a target,
dnl check if a bsp-subdirectory is present for all bsps found
dnl
dnl RTEMS_CHECK_BSPS(bsp_list)
AC_DEFUN(RTEMS_CHECK_BSPS,
[
AC_REQUIRE([RTEMS_CHECK_CPU])dnl sets RTEMS_CPU, target
AC_REQUIRE([RTEMS_TOP])dnl sets RTEMS_TOPdir
AC_MSG_CHECKING([for bsps])
files=`ls $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU`
for file in $files; do
if test -r $srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$RTEMS_CPU/$file/bsp_specs; then
case $file in
# Now account for BSPs with build variants
c4xsim) $1="[$]$1 c4xsim c3xsim";;
gen68360) $1="[$]$1 gen68360 gen68360_040";;
p4000) $1="[$]$1 p4600 p4650";;
mvme162) $1="[$]$1 mvme162 mvme162lx";;
mbx8xx) $1="[$]$1 mbx821_001 mbx860_002 mbx860_005b";;
motorola_powerpc) $1="[$]$1 mvme2307 mcp750";;
pc386) $1="[$]$1 pc386 pc386dx pc486 pc586 pc686 pck6";;
erc32) $1="[$]$1 erc32 erc32nfp";;
leon) $1="[$]$1 leon1 leon2";;
sim68000) $1="[$]$1 sim68000 simcpu32";;
shsim) $1="[$]$1 simsh7032 simsh7045";;
*) $1="[$]$1 $file";;
esac;
fi
done
AC_MSG_RESULT([[$]$1 .. done])
])dnl
AC_DEFUN(RTEMS_CHECK_CUSTOM_BSP,
[dnl
AC_REQUIRE([RTEMS_TOP])
AC_MSG_CHECKING([for make/custom/[$]$1.cfg])
if test -r "$srcdir/$RTEMS_TOPdir/make/custom/[$]$1.cfg"; then
AC_MSG_RESULT([yes])
else
AC_MSG_ERROR([no])
fi
])dnl
AC_DEFUN(RTEMS_ENABLE_BARE,
[
AC_ARG_ENABLE(bare-cpu-cflags,
AC_HELP_STRING([--enable-bare-cpu-cflags],[specify a particular cpu cflag (bare bsp specific)]),
[case "${enableval}" in
no) BARE_CPU_CFLAGS="" ;;
*) BARE_CPU_CFLAGS="${enableval}" ;;
esac],
[BARE_CPU_CFLAGS=""])
AC_ARG_ENABLE(bare-cpu-model,
AC_HELP_STRING([--enable-bare-cpu-model],[specify a particular cpu model (bare bsp specific)]),
[case "${enableval}" in
no) BARE_CPU_MODEL="" ;;
*) BARE_CPU_MODEL="${enableval}" ;;
esac],
[BARE_CPU_MODEL=""])
])
dnl This provides configure definitions used for multilib support
dnl parts of these macros are derived from newlib-1.8.2's multilib support
AC_DEFUN(RTEMS_ENABLE_MULTILIB,
[
AC_ARG_ENABLE(multilib,
AC_HELP_STRING([--enable-multilib],
[build many library versions (default=no)]),
[case "${enableval}" in
yes) multilib=yes ;;
no) multilib=no ;;
*) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
esac], [multilib=no])dnl
AM_CONDITIONAL(MULTILIB,test x"${multilib}" = x"yes")
])
Go to most recent revision | Compare with Previous | Blame | View Log