Subversion Repositories pairing

`timescale 1ns / 1ns
`include "../rtl/inc.v"
/* purpose of this module is ISE post-route simulation */
/* if you don't use Xilinx ISE, please ignore this file :) */
module test_post_route;
 
	// Inputs
	reg clk;
	reg reset;
	reg [`WIDTH:0] x1, y1, x2, y2;
 
	// Outputs
	wire done, ok;
 
	// Instantiate the Unit Under Test (UUT)
	post_route_debug uut (
		.clk(clk), 
		.reset(reset), 
		.x1(x1), 
		.y1(y1), 
		.x2(x2), 
		.y2(y2), 
		.done(done), 
		.ok(ok)
	);
 
	initial begin
		// Initialize Inputs
		clk = 0;
		reset = 0;
		x1 = 0;
		y1 = 0;
		x2 = 0;
		y2 = 0;
 
		// Wait 100 ns for global reset to finish
		#100;
 
		// Add stimulus here
        x1 = 194'h6a18950064046a122a14118668466a262a91509688159890;
        y1 = 194'h69112569422aa0a25224aa010888066061124a8685566825;
        x2 = 194'h155945aa8924654812564110544995a28845901211454814;
        y2 = 194'h8481099460280628960a82559920000a99a2106955289a40;
        @ (negedge clk); reset = 1;
        @ (negedge clk); reset = 0;
        @ (posedge done); @ (negedge clk);
        if (ok !== 1'b1) $display("E");
        $finish;
 
	end
 
    always #5 clk = ~clk;      
endmodule