OpenCores
URL https://opencores.org/ocsvn/qaz_libs/qaz_libs/trunk

Subversion Repositories qaz_libs

[/] [qaz_libs/] [trunk/] [PCIe/] [syn/] [a10gx_riffa/] [sys_pll.qsys] - Rev 49

Compare with Previous | Blame | View Log

<?xml version="1.0" encoding="UTF-8"?>
<system name="$${FILENAME}">
 <component
   name="$${FILENAME}"
   displayName="$${FILENAME}"
   version="1.0"
   description=""
   tags="INTERNAL_COMPONENT=true"
   categories="" />
 <parameter name="bonusData"><![CDATA[bonusData 
{
   element iopll_0
   {
      datum _sortIndex
      {
         value = "0";
         type = "int";
      }
   }
}
]]></parameter>
 <parameter name="clockCrossingAdapter" value="HANDSHAKE" />
 <parameter name="device" value="10AX115S2F45I1SG" />
 <parameter name="deviceFamily" value="Arria 10" />
 <parameter name="deviceSpeedGrade" value="1" />
 <parameter name="fabricMode" value="QSYS" />
 <parameter name="generateLegacySim" value="false" />
 <parameter name="generationId" value="0" />
 <parameter name="globalResetBus" value="false" />
 <parameter name="hdlLanguage" value="VERILOG" />
 <parameter name="hideFromIPCatalog" value="true" />
 <parameter name="lockedInterfaceDefinition" value="" />
 <parameter name="maxAdditionalLatency" value="1" />
 <parameter name="projectName" value="" />
 <parameter name="sopcBorderPoints" value="false" />
 <parameter name="systemHash" value="0" />
 <parameter name="testBenchDutName" value="" />
 <parameter name="timeStamp" value="0" />
 <parameter name="useTestBenchNamingPattern" value="false" />
 <instanceScript></instanceScript>
 <interface name="locked" internal="iopll_0.locked" type="conduit" dir="end">
  <port name="locked" internal="locked" />
 </interface>
 <interface name="outclk0" internal="iopll_0.outclk0" type="clock" dir="start">
  <port name="outclk_0" internal="outclk_0" />
 </interface>
 <interface name="refclk" internal="iopll_0.refclk" type="clock" dir="end">
  <port name="refclk" internal="refclk" />
 </interface>
 <interface name="reset" internal="iopll_0.reset" type="reset" dir="end">
  <port name="rst" internal="rst" />
 </interface>
 <module
   name="iopll_0"
   kind="altera_iopll"
   version="17.1"
   enabled="1"
   autoexport="1">
  <parameter name="gui_active_clk" value="false" />
  <parameter name="gui_c_cnt_in_src0">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src1">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src2">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src3">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src4">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src5">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src6">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src7">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_c_cnt_in_src8">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_cal_code_hex_file" value="iossm.hex" />
  <parameter name="gui_cal_converge" value="false" />
  <parameter name="gui_cal_error" value="cal_clean" />
  <parameter name="gui_cascade_counter0" value="false" />
  <parameter name="gui_cascade_counter1" value="false" />
  <parameter name="gui_cascade_counter10" value="false" />
  <parameter name="gui_cascade_counter11" value="false" />
  <parameter name="gui_cascade_counter12" value="false" />
  <parameter name="gui_cascade_counter13" value="false" />
  <parameter name="gui_cascade_counter14" value="false" />
  <parameter name="gui_cascade_counter15" value="false" />
  <parameter name="gui_cascade_counter16" value="false" />
  <parameter name="gui_cascade_counter17" value="false" />
  <parameter name="gui_cascade_counter2" value="false" />
  <parameter name="gui_cascade_counter3" value="false" />
  <parameter name="gui_cascade_counter4" value="false" />
  <parameter name="gui_cascade_counter5" value="false" />
  <parameter name="gui_cascade_counter6" value="false" />
  <parameter name="gui_cascade_counter7" value="false" />
  <parameter name="gui_cascade_counter8" value="false" />
  <parameter name="gui_cascade_counter9" value="false" />
  <parameter name="gui_cascade_outclk_index" value="0" />
  <parameter name="gui_clk_bad" value="false" />
  <parameter name="gui_clock_name_global" value="false" />
  <parameter name="gui_clock_name_string0" value="outclk0" />
  <parameter name="gui_clock_name_string1" value="outclk1" />
  <parameter name="gui_clock_name_string10" value="outclk10" />
  <parameter name="gui_clock_name_string11" value="outclk11" />
  <parameter name="gui_clock_name_string12" value="outclk12" />
  <parameter name="gui_clock_name_string13" value="outclk13" />
  <parameter name="gui_clock_name_string14" value="outclk14" />
  <parameter name="gui_clock_name_string15" value="outclk15" />
  <parameter name="gui_clock_name_string16" value="outclk16" />
  <parameter name="gui_clock_name_string17" value="outclk17" />
  <parameter name="gui_clock_name_string2" value="outclk2" />
  <parameter name="gui_clock_name_string3" value="outclk3" />
  <parameter name="gui_clock_name_string4" value="outclk4" />
  <parameter name="gui_clock_name_string5" value="outclk5" />
  <parameter name="gui_clock_name_string6" value="outclk6" />
  <parameter name="gui_clock_name_string7" value="outclk7" />
  <parameter name="gui_clock_name_string8" value="outclk8" />
  <parameter name="gui_clock_name_string9" value="outclk9" />
  <parameter name="gui_clock_to_compensate" value="0" />
  <parameter name="gui_debug_mode" value="false" />
  <parameter name="gui_divide_factor_c0" value="6" />
  <parameter name="gui_divide_factor_c1" value="6" />
  <parameter name="gui_divide_factor_c10" value="6" />
  <parameter name="gui_divide_factor_c11" value="6" />
  <parameter name="gui_divide_factor_c12" value="6" />
  <parameter name="gui_divide_factor_c13" value="6" />
  <parameter name="gui_divide_factor_c14" value="6" />
  <parameter name="gui_divide_factor_c15" value="6" />
  <parameter name="gui_divide_factor_c16" value="6" />
  <parameter name="gui_divide_factor_c17" value="6" />
  <parameter name="gui_divide_factor_c2" value="6" />
  <parameter name="gui_divide_factor_c3" value="6" />
  <parameter name="gui_divide_factor_c4" value="6" />
  <parameter name="gui_divide_factor_c5" value="6" />
  <parameter name="gui_divide_factor_c6" value="6" />
  <parameter name="gui_divide_factor_c7" value="6" />
  <parameter name="gui_divide_factor_c8" value="6" />
  <parameter name="gui_divide_factor_c9" value="6" />
  <parameter name="gui_divide_factor_n" value="1" />
  <parameter name="gui_dps_cntr" value="C0" />
  <parameter name="gui_dps_dir" value="Positive" />
  <parameter name="gui_dps_num" value="1" />
  <parameter name="gui_dsm_out_sel" value="1st_order" />
  <parameter name="gui_duty_cycle0" value="50.0" />
  <parameter name="gui_duty_cycle1" value="50.0" />
  <parameter name="gui_duty_cycle10" value="50.0" />
  <parameter name="gui_duty_cycle11" value="50.0" />
  <parameter name="gui_duty_cycle12" value="50.0" />
  <parameter name="gui_duty_cycle13" value="50.0" />
  <parameter name="gui_duty_cycle14" value="50.0" />
  <parameter name="gui_duty_cycle15" value="50.0" />
  <parameter name="gui_duty_cycle16" value="50.0" />
  <parameter name="gui_duty_cycle17" value="50.0" />
  <parameter name="gui_duty_cycle2" value="50.0" />
  <parameter name="gui_duty_cycle3" value="50.0" />
  <parameter name="gui_duty_cycle4" value="50.0" />
  <parameter name="gui_duty_cycle5" value="50.0" />
  <parameter name="gui_duty_cycle6" value="50.0" />
  <parameter name="gui_duty_cycle7" value="50.0" />
  <parameter name="gui_duty_cycle8" value="50.0" />
  <parameter name="gui_duty_cycle9" value="50.0" />
  <parameter name="gui_en_adv_params" value="false" />
  <parameter name="gui_en_dps_ports" value="false" />
  <parameter name="gui_en_extclkout_ports" value="false" />
  <parameter name="gui_en_lvds_ports" value="Disabled" />
  <parameter name="gui_en_phout_ports" value="false" />
  <parameter name="gui_en_reconf" value="false" />
  <parameter name="gui_enable_cascade_in" value="false" />
  <parameter name="gui_enable_cascade_out" value="false" />
  <parameter name="gui_enable_mif_dps" value="false" />
  <parameter name="gui_enable_output_counter_cascading" value="false" />
  <parameter name="gui_existing_mif_file_path" value="~/pll.mif" />
  <parameter name="gui_extclkout_0_source" value="C0" />
  <parameter name="gui_extclkout_1_source" value="C0" />
  <parameter name="gui_feedback_clock" value="Global Clock" />
  <parameter name="gui_fix_vco_frequency" value="false" />
  <parameter name="gui_fixed_vco_frequency" value="600.0" />
  <parameter name="gui_frac_multiply_factor" value="1" />
  <parameter name="gui_fractional_cout" value="32" />
  <parameter name="gui_include_iossm" value="false" />
  <parameter name="gui_lock_setting" value="Low Lock Time" />
  <parameter name="gui_mif_config_name" value="unnamed" />
  <parameter name="gui_mif_gen_options">Generate New MIF File</parameter>
  <parameter name="gui_multiply_factor" value="6" />
  <parameter name="gui_new_mif_file_path" value="~/pll.mif" />
  <parameter name="gui_number_of_clocks" value="1" />
  <parameter name="gui_operation_mode" value="direct" />
  <parameter name="gui_output_clock_frequency0" value="50.0" />
  <parameter name="gui_output_clock_frequency1" value="100.0" />
  <parameter name="gui_output_clock_frequency10" value="100.0" />
  <parameter name="gui_output_clock_frequency11" value="100.0" />
  <parameter name="gui_output_clock_frequency12" value="100.0" />
  <parameter name="gui_output_clock_frequency13" value="100.0" />
  <parameter name="gui_output_clock_frequency14" value="100.0" />
  <parameter name="gui_output_clock_frequency15" value="100.0" />
  <parameter name="gui_output_clock_frequency16" value="100.0" />
  <parameter name="gui_output_clock_frequency17" value="100.0" />
  <parameter name="gui_output_clock_frequency2" value="100.0" />
  <parameter name="gui_output_clock_frequency3" value="100.0" />
  <parameter name="gui_output_clock_frequency4" value="100.0" />
  <parameter name="gui_output_clock_frequency5" value="100.0" />
  <parameter name="gui_output_clock_frequency6" value="100.0" />
  <parameter name="gui_output_clock_frequency7" value="100.0" />
  <parameter name="gui_output_clock_frequency8" value="100.0" />
  <parameter name="gui_output_clock_frequency9" value="100.0" />
  <parameter name="gui_parameter_table_hex_file" value="seq_params_sim.hex" />
  <parameter name="gui_phase_shift0" value="0.0" />
  <parameter name="gui_phase_shift1" value="0.0" />
  <parameter name="gui_phase_shift10" value="0.0" />
  <parameter name="gui_phase_shift11" value="0.0" />
  <parameter name="gui_phase_shift12" value="0.0" />
  <parameter name="gui_phase_shift13" value="0.0" />
  <parameter name="gui_phase_shift14" value="0.0" />
  <parameter name="gui_phase_shift15" value="0.0" />
  <parameter name="gui_phase_shift16" value="0.0" />
  <parameter name="gui_phase_shift17" value="0.0" />
  <parameter name="gui_phase_shift2" value="0.0" />
  <parameter name="gui_phase_shift3" value="0.0" />
  <parameter name="gui_phase_shift4" value="0.0" />
  <parameter name="gui_phase_shift5" value="0.0" />
  <parameter name="gui_phase_shift6" value="0.0" />
  <parameter name="gui_phase_shift7" value="0.0" />
  <parameter name="gui_phase_shift8" value="0.0" />
  <parameter name="gui_phase_shift9" value="0.0" />
  <parameter name="gui_phase_shift_deg0" value="0.0" />
  <parameter name="gui_phase_shift_deg1" value="0.0" />
  <parameter name="gui_phase_shift_deg10" value="0.0" />
  <parameter name="gui_phase_shift_deg11" value="0.0" />
  <parameter name="gui_phase_shift_deg12" value="0.0" />
  <parameter name="gui_phase_shift_deg13" value="0.0" />
  <parameter name="gui_phase_shift_deg14" value="0.0" />
  <parameter name="gui_phase_shift_deg15" value="0.0" />
  <parameter name="gui_phase_shift_deg16" value="0.0" />
  <parameter name="gui_phase_shift_deg17" value="0.0" />
  <parameter name="gui_phase_shift_deg2" value="0.0" />
  <parameter name="gui_phase_shift_deg3" value="0.0" />
  <parameter name="gui_phase_shift_deg4" value="0.0" />
  <parameter name="gui_phase_shift_deg5" value="0.0" />
  <parameter name="gui_phase_shift_deg6" value="0.0" />
  <parameter name="gui_phase_shift_deg7" value="0.0" />
  <parameter name="gui_phase_shift_deg8" value="0.0" />
  <parameter name="gui_phase_shift_deg9" value="0.0" />
  <parameter name="gui_phout_division" value="1" />
  <parameter name="gui_pll_auto_reset" value="false" />
  <parameter name="gui_pll_bandwidth_preset" value="Low" />
  <parameter name="gui_pll_cal_done" value="false" />
  <parameter name="gui_pll_cascading_mode" value="adjpllin" />
  <parameter name="gui_pll_freqcal_en" value="true" />
  <parameter name="gui_pll_freqcal_req_flag" value="true" />
  <parameter name="gui_pll_m_cnt_in_src">c_m_cnt_in_src_ph_mux_clk</parameter>
  <parameter name="gui_pll_mode" value="Integer-N PLL" />
  <parameter name="gui_pll_tclk_mux_en" value="false" />
  <parameter name="gui_pll_tclk_sel" value="pll_tclk_m_src" />
  <parameter name="gui_pll_type" value="S10_Simple" />
  <parameter name="gui_pll_vco_freq_band_0">pll_freq_clk0_disabled</parameter>
  <parameter name="gui_pll_vco_freq_band_1">pll_freq_clk1_disabled</parameter>
  <parameter name="gui_ps_units0" value="ps" />
  <parameter name="gui_ps_units1" value="ps" />
  <parameter name="gui_ps_units10" value="ps" />
  <parameter name="gui_ps_units11" value="ps" />
  <parameter name="gui_ps_units12" value="ps" />
  <parameter name="gui_ps_units13" value="ps" />
  <parameter name="gui_ps_units14" value="ps" />
  <parameter name="gui_ps_units15" value="ps" />
  <parameter name="gui_ps_units16" value="ps" />
  <parameter name="gui_ps_units17" value="ps" />
  <parameter name="gui_ps_units2" value="ps" />
  <parameter name="gui_ps_units3" value="ps" />
  <parameter name="gui_ps_units4" value="ps" />
  <parameter name="gui_ps_units5" value="ps" />
  <parameter name="gui_ps_units6" value="ps" />
  <parameter name="gui_ps_units7" value="ps" />
  <parameter name="gui_ps_units8" value="ps" />
  <parameter name="gui_ps_units9" value="ps" />
  <parameter name="gui_refclk1_frequency" value="100.0" />
  <parameter name="gui_refclk_switch" value="false" />
  <parameter name="gui_reference_clock_frequency" value="50.0" />
  <parameter name="gui_switchover_delay" value="0" />
  <parameter name="gui_switchover_mode">Automatic Switchover</parameter>
  <parameter name="gui_use_NDFB_modes" value="false" />
  <parameter name="gui_use_locked" value="true" />
  <parameter name="gui_usr_device_speed_grade" value="1" />
  <parameter name="gui_vco_frequency" value="600.0" />
  <parameter name="hp_qsys_scripting_mode" value="false" />
  <parameter name="system_info_device_component" value="10AX115S2F45I1SG" />
  <parameter name="system_info_device_family" value="Arria 10" />
  <parameter name="system_info_device_speed_grade" value="1" />
  <parameter name="system_part_trait_speed_grade" value="1" />
 </module>
 <interconnectRequirement for="$system" name="qsys_mm.clockCrossingAdapter" value="HANDSHAKE" />
 <interconnectRequirement for="$system" name="qsys_mm.enableEccProtection" value="FALSE" />
 <interconnectRequirement for="$system" name="qsys_mm.insertDefaultSlave" value="FALSE" />
 <interconnectRequirement for="$system" name="qsys_mm.maxAdditionalLatency" value="1" />
</system>

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.