URL
https://opencores.org/ocsvn/s6soc/s6soc/trunk
Subversion Repositories s6soc
[/] [s6soc/] [trunk/] [Makefile] - Rev 33
Go to most recent revision | Compare with Previous | Blame | View Log
##############################################################################//
##
## Filename: Makefile
##
## Project: CMod S6 System on a Chip, ZipCPU demonstration project
##
## Purpose: An initial attempt at a master project makefile. Does not
## yet support subdirectory recursion, so it currently does
## little more than make a tar file or a date stamp.
##
## Creator: Dan Gisselquist, Ph.D.
## Gisselquist Technology, LLC
##
##############################################################################//
##
## Copyright (C) 2015-2016, Gisselquist Technology, LLC
##
## This program is free software (firmware): you can redistribute it and/or
## modify it under the terms of the GNU General Public License as published
## by the Free Software Foundation, either version 3 of the License, or (at
## your option) any later version.
##
## This program is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with this program. (It's in the $(ROOT)/doc directory, run make with no
## target there if the PDF file isn't present.) If not, see
## <http://www.gnu.org/licenses/> for a copy.
##
## License: GPL, v3, as defined and found on www.gnu.org,
## http://www.gnu.org/licenses/gpl.html
##
##
##############################################################################//
##
##
.PHONY: all
all: datestamp archive rtl sw
# BENCH := `find bench -name Makefile` `find bench -name "*.cpp"` `find bench -name "*.h"`
BENCH :=
RTL := `find rtl -name "*.v"` `find rtl -name Makefile`
NOTES := `find . -name "*.txt"` `find . -name "*.html"`
SW := `find sw -name "*.cpp"` `find sw -name "*.h"` \
`find sw -name "*.sh"` `find sw -name "*.py"` \
`find sw -name "*.pl"` `find sw -name Makefile`
# PROJ := xilinx/xula.prj xilinx/xula.xise xilinx/xula.xst \
# xilinx/xula.ut xilinx/Makefile
PROJ :=
BIN := `find xilinx -name "*.bit"`
CONSTRAINTS := cmod.ucf
YYMMDD := `date +%Y%m%d`
.PHONY: datestamp
datestamp:
@bash -c 'if [ ! -e $(YYMMDD)-build.v ]; then rm 20??????-build.v; perl mkdatev.pl > $(YYMMDD)-build.v; rm -f rtl/builddate.v; fi'
@bash -c 'if [ ! -e rtl/builddate.v ]; then cd rtl; cp ../$(YYMMDD)-build.v builddate.v; fi'
.PHONY: rtl
rtl:
@make --no-print-directory -C rtl
.PHONY: sw
sw:
@make --no-print-directory -C sw
.PHONY: doc
doc:
@make --no-print-directory -C doc
.PHONY: bench
bench: rtl
@make --no-print-directory -C bench/cpp
.PHONY: archive
archive:
tar --transform s,^,$(YYMMDD)-s6/, -chjf $(YYMMDD)-s6.tjz $(BENCH) $(SW) $(RTL) $(NOTES) $(PROJ) $(BIN) $(CONSTRAINTS)
# .PHONY: bit
# bit:
# make --no-print-directory -C xilinx toplevel.bit
axload:
djtgcfg enum
djtgcfg init -d CmodS6
djtgcfg prog -d CmodS6 -i 0 -f xilinx/alttop.bit
# Might also be able to do a ...
# djtgcfg erase -d CmodS6 -i 0
# but I can't speak to whether it would be useful or not.
xload:
djtgcfg init -d CmodS6
djtgcfg prog -d CmodS6 -i 0 -f xilinx/toplevel.bit
Go to most recent revision | Compare with Previous | Blame | View Log