OpenCores
URL https://opencores.org/ocsvn/s6soc/s6soc/trunk

Subversion Repositories s6soc

[/] [s6soc/] [trunk/] [sw/] [dev/] [display.c] - Rev 21

Go to most recent revision | Compare with Previous | Blame | View Log

////////////////////////////////////////////////////////////////////////////////
//
// Filename: 	display.c
//
// Project:	CMod S6 System on a Chip, ZipCPU demonstration project
//
// Purpose:	A device driver for the SPI controlled display.  The primary
//		purpose of this "device" is to output SPI instructions, though,
//	not to handle screen position or to optimize data set to the display.
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015-2016, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program.  (It's in the $(ROOT)/doc directory, run make with no
// target there if the PDF file isn't present.)  If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License:	GPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
#include "board.h"
#include "display.h"
 
static void	dispwait(void) {
	// Slow us down to the speed the display can handle
	// We want to delay about 0x800 clocks.
	// Three instructions per loop,
	//	LBL:
	//		NOOP
	//		ADD -1,CTR
	//		BNZ LBL
	//	40 clocks per instruction, as required by the SPI flash memory
	int i = 18;
	do {
		asm("noop");
	} while(i-->0);
}
 
void	dispchar(int ch) {
	if (!ch) // Don't display null characters
		return;
	if (ch&(~0x0ff)) { // Multiple characters to display
		int	v = (ch>>24)&0x0ff;
		if (v) {
			dispchar(v);
			v = (ch>>16)&0x0ff;
			if (v) {
				dispchar(v);
				v = (ch>> 8)&0x0ff;
				if (v) {
					dispchar(v);
					dispchar(ch&0x0ff);
				}
			}
		}
	} else {
		IOSPACE	*sys = (IOSPACE *)IOADDR;
		// Send the character
		for(int i=0; i<8; i++) {
			int gpiov = GPOCLRV(GPO_MOSI|GPO_SCK|GPO_SS);
			if (ch&0x80)
				gpiov |= GPOSETV(GPO_MOSI);
			sys->io_gpio = gpiov;
			dispwait();
			sys->io_gpio = GPOSETV(GPO_SCK);
			dispwait();
			ch<<=1;
		}
		// Turn off the clock
		sys->io_gpio = GPOCLRV(GPO_SCK);
		dispwait();
		// Then the port
		sys->io_gpio = GPOSETV(GPO_SS);
		dispwait();
	}
}
 
#ifdef	ZIPOS
#include "../zipos/ktraps.h"
#include "../zipos/kfildes.h"
void	display_task(void) {
	while(1) {
		int	ch;
		read(FILENO_STDIN, &ch, 1);
		dispchar(ch);
	}
}
#endif
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2023 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.