OpenCores
URL https://opencores.org/ocsvn/s6soc/s6soc/trunk

Subversion Repositories s6soc

[/] [s6soc/] [trunk/] [sw/] [dev/] [kptest.c] - Rev 45

Go to most recent revision | Compare with Previous | Blame | View Log

////////////////////////////////////////////////////////////////////////////////
//
// Filename: 	kptest.c
//
// Project:	CMod S6 System on a Chip, ZipCPU demonstration project
//
// Purpose:	To test and demonstrate that the keypad works.
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2015-2017, Gisselquist Technology, LLC
//
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of  the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program.  (It's in the $(ROOT)/doc directory, run make with no
// target there if the PDF file isn't present.)  If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License:	GPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/gpl.html
//
//
////////////////////////////////////////////////////////////////////////////////
//
//
#include "asmstartup.h"
#include "board.h"
#include "keypad.h"
#include "txfns.h"
 
void entry(void) {
	register volatile IOSPACE *const sys = _sys;
 
	sys->io_pic = 0x07fffffff; // Acknowledge and turn off all interrupts
	sys->io_spio = 0x0f0;
	sys->io_timer = 100000 | TM_REPEAT;
 
	txstr("Press any keypad button for test.\r\n");
 
	while(1) {
		int	ch;
		while(0 == (sys->io_pic & INT_KEYPAD))
			;
		sys->io_pic = INT_KEYPAD | INT_TIMER;
		// Wait 5 ms
		for(int i=0; i<5; i++) {
			while(0 == (sys->io_pic & INT_TIMER))
				;
		}
		sys->io_spio = 0x011;
		ch = keypadread();
		if ((ch < 0)||(ch == -1))
			; // txstr("Unknown key pressed or error\n");
		else if (ch < 10)
			txchr(ch+'0');
		else if (ch == 15)
			txstr("F\r\n");
		else if (ch < 15)
			txchr(ch+'A'-10);
		else {
			txstr("Unknown key pressed\r\n");
		}
		keypad_wait_for_release();
		sys->io_spio = 0x010;
	}
}
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.