OpenCores
URL https://opencores.org/ocsvn/sdr_ctrl/sdr_ctrl/trunk

Subversion Repositories sdr_ctrl

[/] [sdr_ctrl/] [trunk/] [verif/] [tb/] [tb_core.sv] - Rev 73

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////                                                              ////
////  This file is part of the SDRAM Controller project           ////
////  http://www.opencores.org/cores/sdr_ctrl/                    ////
////                                                              ////
////  Description                                                 ////
////  SDRAM CTRL definitions.                                     ////
////                                                              ////
////  To Do:                                                      ////
////    nothing                                                   ////
//   Version  :0.1 - Test Bench automation is improvised with     ////
//             seperate data,address,burst length fifo.           ////
//             Now user can create different write and            ////
//             read sequence                                      ////
////                                                              ////
////  Author(s):                                                  ////
////      - Dinesh Annayya, dinesha@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////

// This testbench stand-alone verify the sdram core

`timescale 1ns/1ps

module tb_core;

parameter P_SYS  = 10;     //    100MHz

// General
reg            RESETN;
reg            sdram_clk;

initial sdram_clk = 0;

always #(P_SYS/2) sdram_clk = !sdram_clk;

parameter      dw              = 32;  // data width
parameter      tw              = 8;   // tag id width
parameter      bl              = 5;   // burst_lenght_width 

//-------------------------------------------
// Application Interface bus
//-------------------------------------------
reg                   app_req            ; // Application Request
reg  [8:0]            app_req_len        ; // Burst Request length
wire                  app_req_ack        ; // Application Request Ack
reg [25:0]            app_req_addr       ; // Application Address
reg                   app_req_wr_n       ; // 1 -> Read, 0 -> Write
reg [dw-1:0]          app_wr_data        ; // Write Data
reg [dw/8-1:0]        app_wr_en_n        ; // Write Enable, Active Low
wire                  app_rd_valid       ; // Read Valid
wire                  app_last_rd        ; // Last Read Valid
wire                  app_last_wr        ; // Last Write Valid
wire [dw-1:0]         app_rd_data        ; // Read Data

//--------------------------------------------
// SDRAM I/F 
//--------------------------------------------

`ifdef SDR_32BIT
   wire [31:0]           Dq                 ; // SDRAM Read/Write Data Bus
   wire [31:0]           sdr_dout           ; // SDRAM Data Out
   wire [31:0]           pad_sdr_din        ; // SDRAM Data Input
   wire [3:0]            sdr_den_n          ; // SDRAM Data Enable
   wire [3:0]            sdr_dqm            ; // SDRAM DATA Mask
`elsif SDR_16BIT 
   wire [15:0]           Dq                 ; // SDRAM Read/Write Data Bus
   wire [15:0]           sdr_dout           ; // SDRAM Data Out
   wire [15:0]           pad_sdr_din        ; // SDRAM Data Input
   wire [1:0]            sdr_den_n          ; // SDRAM Data Enable
   wire [1:0]            sdr_dqm            ; // SDRAM DATA Mask
`else 
   wire [7:0]           Dq                 ; // SDRAM Read/Write Data Bus
   wire [7:0]           sdr_dout           ; // SDRAM Data Out
   wire [7:0]           pad_sdr_din        ; // SDRAM Data Input
   wire [0:0]           sdr_den_n          ; // SDRAM Data Enable
   wire [0:0]           sdr_dqm            ; // SDRAM DATA Mask
`endif

wire [1:0]            sdr_ba             ; // SDRAM Bank Select
wire [12:0]           sdr_addr           ; // SDRAM ADRESS
wire                  sdr_init_done      ; // SDRAM Init Done 

// to fix the sdram interface timing issue
wire #(2.0) sdram_clk_d = sdram_clk;
wire #(1.0) pad_clk     = sdram_clk_d;

`ifdef SDR_32BIT

   sdrc_core #(.SDR_DW(32),.SDR_BW(4)) u_dut(
`elsif SDR_16BIT 
   sdrc_core #(.SDR_DW(16),.SDR_BW(2)) u_dut(
`else  // 8 BIT SDRAM
   sdrc_core #(.SDR_DW(8),.SDR_BW(1)) u_dut(
`endif
      // System 
          .clk                (sdram_clk          ),
          .reset_n            (RESETN             ),
          .pad_clk            (pad_clk            ), 
`ifdef SDR_32BIT
          .sdr_width          (2'b00              ), // 32 BIT SDRAM
`elsif SDR_16BIT
          .sdr_width          (2'b01              ), // 16 BIT SDRAM
`else 
          .sdr_width          (2'b10              ), // 8 BIT SDRAM
`endif
          .cfg_colbits        (2'b00              ), // 8 Bit Column Address


/* Request from app */
          .app_req            (app_req            ),    // Transfer Request
          .app_req_addr       (app_req_addr       ),    // SDRAM Address
          .app_req_len        (app_req_len        ),    // Burst Length (in 16 bit words)
          .app_req_wrap       (1'b0               ),    // Wrap mode request (xfr_len = 4)
          .app_req_wr_n       (app_req_wr_n       ),    // 0 => Write request, 1 => read req
          .app_req_ack        (app_req_ack        ),    // Request has been accepted
                
          .app_wr_data        (app_wr_data        ),
          .app_wr_en_n        (app_wr_en_n        ),
          .app_rd_data        (app_rd_data        ),
          .app_last_rd        (app_last_rd        ),
          .app_last_wr        (app_last_wr        ),
          .app_rd_valid       (app_rd_valid       ),
          .app_wr_next_req    (app_wr_next_req    ),
          .app_req_dma_last   (app_req            ),

/* Interface to SDRAMs */
          .sdr_cs_n           (sdr_cs_n           ),
          .sdr_cke            (sdr_cke            ),
          .sdr_ras_n          (sdr_ras_n          ),
          .sdr_cas_n          (sdr_cas_n          ),
          .sdr_we_n           (sdr_we_n           ),
          .sdr_dqm            (sdr_dqm            ),
          .sdr_ba             (sdr_ba             ),
          .sdr_addr           (sdr_addr           ), 
          .pad_sdr_din        (Dq                 ),
          .sdr_dout           (sdr_dout           ),
          .sdr_den_n          (sdr_den_n          ),

    /* Parameters */
          .sdr_init_done      (sdr_init_done      ),
          .cfg_req_depth      (2'h3               ),            //how many req. buffer should hold
          .cfg_sdr_en         (1'b1               ),
          .cfg_sdr_mode_reg   (13'h033            ),
          .cfg_sdr_tras_d     (4'h4               ),
          .cfg_sdr_trp_d      (4'h2               ),
          .cfg_sdr_trcd_d     (4'h2               ),
          .cfg_sdr_cas        (3'h3               ),
          .cfg_sdr_trcar_d    (4'h7               ),
          .cfg_sdr_twr_d      (4'h1               ),
          .cfg_sdr_rfsh       (12'h100            ), // reduced from 12'hC35
          .cfg_sdr_rfmax      (3'h6               )

);


`ifdef SDR_32BIT
  assign Dq[7:0]    = (sdr_den_n[0] == 1'b0) ? sdr_dout[7:0]   : 8'hZZ;
  assign Dq[15:8]   = (sdr_den_n[1] == 1'b0) ? sdr_dout[15:8]  : 8'hZZ;
  assign Dq[23:16]  = (sdr_den_n[2] == 1'b0) ? sdr_dout[23:16] : 8'hZZ;
  assign Dq[31:24]  = (sdr_den_n[3] == 1'b0) ? sdr_dout[31:24] : 8'hZZ;
mt48lc2m32b2 #(.data_bits(32)) u_sdram32 (
          .Dq                 (Dq                 ) , 
          .Addr               (sdr_addr[10:0]     ), 
          .Ba                 (sdr_ba             ), 
          .Clk                (sdram_clk_d        ), 
          .Cke                (sdr_cke            ), 
          .Cs_n               (sdr_cs_n           ), 
          .Ras_n              (sdr_ras_n          ), 
          .Cas_n              (sdr_cas_n          ), 
          .We_n               (sdr_we_n           ), 
          .Dqm                (sdr_dqm            )
     );

`elsif SDR_16BIT

assign Dq[7:0]  = (sdr_den_n[0] == 1'b0) ? sdr_dout[7:0]  : 8'hZZ;
assign Dq[15:8] = (sdr_den_n[1] == 1'b0) ? sdr_dout[15:8] : 8'hZZ;

   IS42VM16400K u_sdram16 (
          .dq                 (Dq                 ), 
          .addr               (sdr_addr[11:0]     ), 
          .ba                 (sdr_ba             ), 
          .clk                (sdram_clk_d        ), 
          .cke                (sdr_cke            ), 
          .csb                (sdr_cs_n           ), 
          .rasb               (sdr_ras_n          ), 
          .casb               (sdr_cas_n          ), 
          .web                (sdr_we_n           ), 
          .dqm                (sdr_dqm            )
    );
`else 

assign Dq[7:0]  = (sdr_den_n[0] == 1'b0) ? sdr_dout[7:0]  : 8'hZZ;

mt48lc8m8a2 #(.data_bits(8)) u_sdram8 (
          .Dq                 (Dq                 ) , 
          .Addr               (sdr_addr[11:0]     ), 
          .Ba                 (sdr_ba             ), 
          .Clk                (sdram_clk_d        ), 
          .Cke                (sdr_cke            ), 
          .Cs_n               (sdr_cs_n           ), 
          .Ras_n              (sdr_ras_n          ), 
          .Cas_n              (sdr_cas_n          ), 
          .We_n               (sdr_we_n           ), 
          .Dqm                (sdr_dqm            )
     );
`endif

//--------------------
// data/address/burst length FIFO
//--------------------
int dfifo[$]; // data fifo
int afifo[$]; // address  fifo
int bfifo[$]; // Burst Length fifo

reg [31:0] read_data;
reg [31:0] ErrCnt;
int k;
reg [31:0] StartAddr;
/////////////////////////////////////////////////////////////////////////
// Test Case
/////////////////////////////////////////////////////////////////////////

initial begin //{
  ErrCnt          = 0;
   app_req_addr  = 0;
   app_wr_data    = 0;
   app_wr_en_n    = 4'hF;
   app_req_wr_n   = 0;
   app_req        = 0;
   app_req_len    = 0;

  RESETN    = 1'h1;

 #100
  // Applying reset
  RESETN    = 1'h0;
  #10000;
  // Releasing reset
  RESETN    = 1'h1;
  #1000;
  wait(u_dut.sdr_init_done == 1);

  #1000;
  $display("-------------------------------------- ");
  $display(" Case-1: Single Write/Read Case        ");
  $display("-------------------------------------- ");

  burst_write(32'h4_0000,8'h4);  
 #1000;
  burst_read();  

  // Repeat one more time to analysis the 
  // SDRAM state change for same col/row address
  $display("-------------------------------------- ");
  $display(" Case-2: Repeat same transfer once again ");
  $display("----------------------------------------");
  burst_write(32'h4_0000,8'h4);  
  burst_read();  
  burst_write(32'h0040_0000,8'h5);  
  burst_read();  
  $display("----------------------------------------");
  $display(" Case-3 Create a Page Cross Over        ");
  $display("----------------------------------------");
  burst_write(32'h0000_0FF0,8'h8);  
  burst_write(32'h0001_0FF4,8'hF);  
  burst_write(32'h0002_0FF8,8'hF);  
  burst_write(32'h0003_0FFC,8'hF);  
  burst_write(32'h0004_0FE0,8'hF);  
  burst_write(32'h0005_0FE4,8'hF);  
  burst_write(32'h0006_0FE8,8'hF);  
  burst_write(32'h0007_0FEC,8'hF);  
  burst_write(32'h0008_0FD0,8'hF);  
  burst_write(32'h0009_0FD4,8'hF);  
  burst_write(32'h000A_0FD8,8'hF);  
  burst_write(32'h000B_0FDC,8'hF);  
  burst_write(32'h000C_0FC0,8'hF);  
  burst_write(32'h000D_0FC4,8'hF);  
  burst_write(32'h000E_0FC8,8'hF);  
  burst_write(32'h000F_0FCC,8'hF);  
  burst_write(32'h0010_0FB0,8'hF);  
  burst_write(32'h0011_0FB4,8'hF);  
  burst_write(32'h0012_0FB8,8'hF);  
  burst_write(32'h0013_0FBC,8'hF);  
  burst_write(32'h0014_0FA0,8'hF);  
  burst_write(32'h0015_0FA4,8'hF);  
  burst_write(32'h0016_0FA8,8'hF);  
  burst_write(32'h0017_0FAC,8'hF);  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  

  $display("----------------------------------------");
  $display(" Case:4 4 Write & 4 Read                ");
  $display("----------------------------------------");
  burst_write(32'h4_0000,8'h4);  
  burst_write(32'h5_0000,8'h5);  
  burst_write(32'h6_0000,8'h6);  
  burst_write(32'h7_0000,8'h7);  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  

  $display("---------------------------------------");
  $display(" Case:5 24 Write & 24 Read With Different Bank and Row ");
  $display("---------------------------------------");
  //----------------------------------------
  // Address Decodeing:
  //  with cfg_col bit configured as: 00
  //    <12 Bit Row> <2 Bit Bank> <8 Bit Column> <2'b00>
  //
  burst_write({12'h000,2'b00,8'h00,2'b00},8'h4);   // Row: 0 Bank : 0
  burst_write({12'h000,2'b01,8'h00,2'b00},8'h5);   // Row: 0 Bank : 1
  burst_write({12'h000,2'b10,8'h00,2'b00},8'h6);   // Row: 0 Bank : 2
  burst_write({12'h000,2'b11,8'h00,2'b00},8'h7);   // Row: 0 Bank : 3
  burst_write({12'h001,2'b00,8'h00,2'b00},8'h4);   // Row: 1 Bank : 0
  burst_write({12'h001,2'b01,8'h00,2'b00},8'h5);   // Row: 1 Bank : 1
  burst_write({12'h001,2'b10,8'h00,2'b00},8'h6);   // Row: 1 Bank : 2
  burst_write({12'h001,2'b11,8'h00,2'b00},8'h7);   // Row: 1 Bank : 3
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  

  burst_write({12'h002,2'b00,8'h00,2'b00},8'h4);   // Row: 2 Bank : 0
  burst_write({12'h002,2'b01,8'h00,2'b00},8'h5);   // Row: 2 Bank : 1
  burst_write({12'h002,2'b10,8'h00,2'b00},8'h6);   // Row: 2 Bank : 2
  burst_write({12'h002,2'b11,8'h00,2'b00},8'h7);   // Row: 2 Bank : 3
  burst_write({12'h003,2'b00,8'h00,2'b00},8'h4);   // Row: 3 Bank : 0
  burst_write({12'h003,2'b01,8'h00,2'b00},8'h5);   // Row: 3 Bank : 1
  burst_write({12'h003,2'b10,8'h00,2'b00},8'h6);   // Row: 3 Bank : 2
  burst_write({12'h003,2'b11,8'h00,2'b00},8'h7);   // Row: 3 Bank : 3

  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  


  burst_write({12'h002,2'b00,8'h00,2'b00},8'h4);   // Row: 2 Bank : 0
  burst_write({12'h002,2'b01,8'h01,2'b00},8'h5);   // Row: 2 Bank : 1
  burst_write({12'h002,2'b10,8'h02,2'b00},8'h6);   // Row: 2 Bank : 2
  burst_write({12'h002,2'b11,8'h03,2'b00},8'h7);   // Row: 2 Bank : 3
  burst_write({12'h003,2'b00,8'h04,2'b00},8'h4);   // Row: 3 Bank : 0
  burst_write({12'h003,2'b01,8'h05,2'b00},8'h5);   // Row: 3 Bank : 1
  burst_write({12'h003,2'b10,8'h06,2'b00},8'h6);   // Row: 3 Bank : 2
  burst_write({12'h003,2'b11,8'h07,2'b00},8'h7);   // Row: 3 Bank : 3

  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  
  burst_read();  

  $display("---------------------------------------------------");
  $display(" Case: 6 Random 2 write and 2 read random");
  $display("---------------------------------------------------");
  for(k=0; k < 20; k++) begin
     StartAddr = $random & 32'h003FFFFF;
     burst_write(StartAddr,($random & 8'h0f)+1);  
 #100;

     StartAddr = $random & 32'h003FFFFF;
     burst_write(StartAddr,($random & 8'h0f)+1);  
 #100;
     burst_read();  
 #100;
     burst_read();  
 #100;
  end


  #10000;

        $display("###############################");
    if(ErrCnt == 0)
        $display("STATUS: SDRAM Write/Read TEST PASSED");
    else
        $display("ERROR:  SDRAM Write/Read TEST FAILED");
        $display("###############################");

    $finish;
end


task burst_write;
input [31:0] Address;
input [7:0]  bl;
int i;
begin
  afifo.push_back(Address);
  bfifo.push_back(bl);

   @ (negedge sdram_clk);
   app_req        = 1;
   app_wr_en_n    = 0;
   app_req_wr_n   = 1'b0;
   app_req_addr   = Address[31:2];
   app_req_len    = bl;
   $display("Write Address: %x, Burst Size: %d",Address,bl);

   // wait for app_req_ack == 1
   do begin
       @ (posedge sdram_clk);
   end while(app_req_ack == 1'b0);
   @ (negedge sdram_clk);
   app_req           = 0;

   for(i=0; i < bl; i++) begin
      app_wr_data        = $random & 32'hFFFFFFFF;
      dfifo.push_back(app_wr_data);

      do begin
          @ (posedge sdram_clk);
      end while(app_wr_next_req == 1'b0);
          @ (negedge sdram_clk);
   
       $display("Status: Burst-No: %d  Write Address: %x  WriteData: %x ",i,Address,app_wr_data);
   end
   app_req        = 0;
   app_wr_en_n    = 'hx;
   app_req_wr_n   = 'hx;
   app_req_addr   = 'hx;
   app_req_len    = 'hx;


end
endtask

task burst_read;
reg [31:0] Address;
reg [7:0]  bl;

int i,j;
reg [31:0]   exp_data;
begin
  
   Address = afifo.pop_front(); 
   bl      = bfifo.pop_front(); 

   @ (negedge sdram_clk);
   app_req        = 1;
   app_wr_en_n    = 0;
   app_req_wr_n   = 1;
   app_req_addr   = Address[29:2];
   app_req_len    = bl;

      // wait for app_req_ack == 1
      do begin
          @ (posedge sdram_clk);
      end while(app_req_ack == 1'b0);
      @ (negedge sdram_clk);
      app_req        = 0;
      app_wr_en_n    = 'hx;
      app_req_wr_n   = 'hx;
      app_req_addr   = 'hx;
      app_req_len    = 'hx;

      for(j=0; j < bl; j++) begin
         wait(app_rd_valid == 1);
         exp_data        = dfifo.pop_front(); // Exptected Read Data
         if(app_rd_data !== exp_data) begin
             $display("READ ERROR: Burst-No: %d Addr: %x Rxp: %x Exd: %x",j,Address+(j*2),app_rd_data,exp_data);
             ErrCnt = ErrCnt+1;
         end else begin
             $display("READ STATUS: Burst-No: %d Addr: %x Rxd: %x",j,Address+(j*2),app_rd_data);
         end 
         @ (posedge sdram_clk);
         @ (negedge sdram_clk);
      end
end
endtask


endmodule

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.