OpenCores
URL https://opencores.org/ocsvn/sdr_ctrl/sdr_ctrl/trunk

Subversion Repositories sdr_ctrl

[/] [sdr_ctrl/] [trunk/] [verif/] [tb/] [tb_top.sv] - Rev 41

Go to most recent revision | Compare with Previous | Blame | View Log

//////////////////////////////////////////////////////////////////////
////                                                              ////
////                                                              ////
////  This file is part of the SDRAM Controller project           ////
////  http://www.opencores.org/cores/sdr_ctrl/                    ////
////                                                              ////
////  Description                                                 ////
////  SDRAM CTRL definitions.                                     ////
////                                                              ////
////  To Do:                                                      ////
////    nothing                                                   ////
////                                                              ////
////  Author(s):                                                  ////
////      - Dinesh Annayya, dinesha@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////


`timescale 1ns/1ps

// This testbench verify with SDRAM TOP

module tb_top;

parameter P_SYS  = 10;     //    200MHz
parameter P_SDR  = 20;     //    100MHz

// General
reg            RESETN;
reg            sdram_clk;
reg            sys_clk;

initial sys_clk = 0;
initial sdram_clk = 0;

always #(P_SYS/2) sys_clk = !sys_clk;
always #(P_SDR/2) sdram_clk = !sdram_clk;

parameter      dw              = 32;  // data width
parameter      tw              = 8;   // tag id width
parameter      bl              = 5;   // burst_lenght_width 

//-------------------------------------------
// WISH BONE Interface
//-------------------------------------------
//--------------------------------------
// Wish Bone Interface
// -------------------------------------      
reg             wb_stb_i           ;
wire            wb_ack_o           ;
reg  [29:0]     wb_addr_i          ;
reg             wb_we_i            ; // 1 - Write, 0 - Read
reg  [dw-1:0]   wb_dat_i           ;
reg  [dw/8-1:0] wb_sel_i           ; // Byte enable
wire  [dw-1:0]  wb_dat_o           ;
reg             wb_cyc_i           ;
reg   [2:0]     wb_cti_i           ;



//--------------------------------------------
// SDRAM I/F 
//--------------------------------------------

`ifdef SDR_32BIT
   wire [31:0]           Dq                 ; // SDRAM Read/Write Data Bus
   wire [3:0]            sdr_dqm            ; // SDRAM DATA Mask
`elsif SDR_16BIT 
   wire [15:0]           Dq                 ; // SDRAM Read/Write Data Bus
   wire [1:0]            sdr_dqm            ; // SDRAM DATA Mask
`else 
   wire [7:0]           Dq                 ; // SDRAM Read/Write Data Bus
   wire [0:0]           sdr_dqm            ; // SDRAM DATA Mask
`endif

wire [1:0]            sdr_ba             ; // SDRAM Bank Select
wire [11:0]           sdr_addr           ; // SDRAM ADRESS
wire                  sdr_init_done      ; // SDRAM Init Done 

// to fix the sdram interface timing issue
wire #(2.0) sdram_clk_d   = sdram_clk;

`ifdef SDR_32BIT

   sdrc_top #(.SDR_DW(32),.SDR_BW(4)) u_dut(
`elsif SDR_16BIT 
   sdrc_top #(.SDR_DW(16),.SDR_BW(2)) u_dut(
`else  // 8 BIT SDRAM
   sdrc_top #(.SDR_DW(8),.SDR_BW(1)) u_dut(
`endif
      // System 
`ifdef SDR_32BIT
          .cfg_sdr_width      (2'b00              ), // 32 BIT SDRAM
`elsif SDR_16BIT
          .cfg_sdr_width      (2'b01              ), // 16 BIT SDRAM
`else 
          .cfg_sdr_width      (2'b10              ), // 8 BIT SDRAM
`endif
          .cfg_colbits        (2'b00              ), // 8 Bit Column Address

/* WISH BONE */
          .wb_rst_i           (!RESETN            ),
          .wb_clk_i           (sys_clk            ),

          .wb_stb_i           (wb_stb_i           ),
          .wb_ack_o           (wb_ack_o           ),
          .wb_addr_i          (wb_addr_i          ),
          .wb_we_i            (wb_we_i            ),
          .wb_dat_i           (wb_dat_i           ),
          .wb_sel_i           (wb_sel_i           ),
          .wb_dat_o           (wb_dat_o           ),
          .wb_cyc_i           (wb_cyc_i           ),
          .wb_cti_i           (wb_cti_i           ), 

/* Interface to SDRAMs */
          .sdram_clk          (sdram_clk          ),
          .sdram_resetn       (RESETN             ),
          .sdr_cs_n           (sdr_cs_n           ),
          .sdr_cke            (sdr_cke            ),
          .sdr_ras_n          (sdr_ras_n          ),
          .sdr_cas_n          (sdr_cas_n          ),
          .sdr_we_n           (sdr_we_n           ),
          .sdr_dqm            (sdr_dqm            ),
          .sdr_ba             (sdr_ba             ),
          .sdr_addr           (sdr_addr           ), 
          .sdr_dq             (Dq                 ),

    /* Parameters */
          .sdr_init_done      (sdr_init_done      ),
          .cfg_req_depth      (2'h2               ),            //how many req. buffer should hold
          .cfg_sdr_en         (1'b1               ),
          .cfg_sdr_mode_reg   (12'h033            ),
          .cfg_sdr_tras_d     (4'h4               ),
          .cfg_sdr_trp_d      (4'h2               ),
          .cfg_sdr_trcd_d     (4'h2               ),
          .cfg_sdr_cas        (3'h3               ),
          .cfg_sdr_trcar_d    (4'h7               ),
          .cfg_sdr_twr_d      (4'h1               ),
          .cfg_sdr_rfsh       (12'hC35            ),
          .cfg_sdr_rfmax      (3'h6               )

);


`ifdef SDR_32BIT
mt48lc2m32b2 #(.data_bits(32)) u_sdram32 (
          .Dq                 (Dq                 ) , 
          .Addr               (sdr_addr           ), 
          .Ba                 (sdr_ba             ), 
          .Clk                (sdram_clk_d        ), 
          .Cke                (sdr_cke            ), 
          .Cs_n               (sdr_cs_n           ), 
          .Ras_n              (sdr_ras_n          ), 
          .Cas_n              (sdr_cas_n          ), 
          .We_n               (sdr_we_n           ), 
          .Dqm                (sdr_dqm            )
     );

`elsif SDR_16BIT

   IS42VM16400K u_sdram16 (
          .dq                 (Dq                 ), 
          .addr               (sdr_addr           ), 
          .ba                 (sdr_ba             ), 
          .clk                (sdram_clk_d        ), 
          .cke                (sdr_cke            ), 
          .csb                (sdr_cs_n           ), 
          .rasb               (sdr_ras_n          ), 
          .casb               (sdr_cas_n          ), 
          .web                (sdr_we_n           ), 
          .dqm                (sdr_dqm            )
    );
`else 


mt48lc8m8a2 #(.data_bits(8)) u_sdram8 (
          .Dq                 (Dq                 ) , 
          .Addr               (sdr_addr           ), 
          .Ba                 (sdr_ba             ), 
          .Clk                (sdram_clk_d        ), 
          .Cke                (sdr_cke            ), 
          .Cs_n               (sdr_cs_n           ), 
          .Ras_n              (sdr_ras_n          ), 
          .Cas_n              (sdr_cas_n          ), 
          .We_n               (sdr_we_n           ), 
          .Dqm                (sdr_dqm            )
     );
`endif

//--------------------
// Write/Read Burst FIFO
//--------------------
int wrdfifo[$]; // write data fifo
int rddfifo[$]; // read data fifo

reg [31:0] read_data;
reg [31:0] ErrCnt;
int k;
reg [31:0] StartAddr;
/////////////////////////////////////////////////////////////////////////
// Test Case
/////////////////////////////////////////////////////////////////////////

initial begin //{
  ErrCnt          = 0;
   wb_addr_i      = 0;
   wb_dat_i      = 0;
   wb_sel_i       = 4'h0;
   wb_we_i        = 0;
   wb_stb_i       = 0;
   wb_cyc_i       = 0;

  RESETN    = 1'h1;

 #100
  // Applying reset
  RESETN    = 1'h0;
  #10000;
  // Releasing reset
  RESETN    = 1'h1;
  #1000;
  wait(u_dut.sdr_init_done == 1);

  #1000;
  
  wrdfifo.push_back(32'h00112233);
  wrdfifo.push_back(32'h11223344);
  wrdfifo.push_back(32'h22334455);
  wrdfifo.push_back(32'h33445566);
  wrdfifo.push_back(32'h44556677);
  wrdfifo.push_back(32'h55667788);
  wrdfifo.push_back(32'h66778899);
  wrdfifo.push_back(32'h77889900);
  wrdfifo.push_back(32'h88990011);
  wrdfifo.push_back(32'h99001122);

  burst_write(32'h40000);  
 #1000;
  burst_read(32'h40000);  

 #1000;
  burst_write(32'h7000_0000);  
 #1000;
  burst_read(32'h7000_0000);  

  for(k=0; k < 20; k++) begin
     StartAddr = $random & 32'h07FFFFFF;
     burst_write(StartAddr);  
    #1000;
     burst_read(StartAddr);  
  end


  #10000;

        $display("###############################");
    if(ErrCnt == 0)
        $display("STATUS: SDRAM Write/Read TEST PASSED");
    else
        $display("ERROR:  SDRAM Write/Read TEST FAILED");
        $display("###############################");

    $finish;
end

task burst_write;
input [31:0] Address;
int i;
begin
   @ (negedge sys_clk);
   $display("Write Address: %x, Burst Size: %d",Address,wrdfifo.size);

   for(i=0; i < wrdfifo.size; i++) begin
      wb_stb_i        = 1;
      wb_cyc_i        = 1;
      wb_we_i         = 1;
      wb_sel_i        = 4'b1111;
      wb_addr_i       = Address[31:2]+i;
      wb_dat_i        = wrdfifo[i];

      do begin
          @ (posedge sys_clk);
      end while(wb_ack_o == 1'b0);
          @ (negedge sys_clk);
   
       $display("Status: Burst-No: %d  Write Address: %x  WriteData: %x ",i,wb_addr_i,wb_dat_i);
   end
   wb_stb_i           = 0;
   wb_cyc_i           = 0;
end
endtask

task burst_read;
input [31:0] Address;

int i,j;
reg [31:0]   rd_data;
begin
   @ (negedge sys_clk);

      for(j=0; j < wrdfifo.size; j++) begin
         wb_stb_i        = 1;
         wb_cyc_i        = 1;
         wb_we_i         = 0;
         wb_addr_i       = Address[31:2]+j;

         do begin
             @ (posedge sys_clk);
         end while(wb_ack_o == 1'b0);
         if(wb_dat_o !== wrdfifo[j]) begin
             $display("READ ERROR: Burst-No: %d Addr: %x Rxp: %x Exd: %x",j,wb_addr_i,wb_dat_o,wrdfifo[j]);
             ErrCnt = ErrCnt+1;
         end else begin
             $display("READ STATUS: Burst-No: %d Addr: %x Rxd: %x",j,wb_addr_i,wb_dat_o);
         end 
         @ (negedge sdram_clk);
      end
   wb_stb_i           = 0;
   wb_cyc_i           = 0;
end
endtask


endmodule

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.