OpenCores
URL https://opencores.org/ocsvn/tcp_socket/tcp_socket/trunk

Subversion Repositories tcp_socket

[/] [tcp_socket/] [trunk/] [README.rst] - Rev 3

Go to most recent revision | Compare with Previous | Blame | View Log

Chips-2.0 Demo for ATLYS Development Card
=========================================

:Author: Jonathan P Dawson
:Date: 2013-10-15
:email: chips@jondawson.org.uk


This project is intended to demonstrate the capabilities of the `Chips-2.0 <https://github.com/dawsonjon/Chips-2.0>`_  development environment. The project is targets the Xilinx Spartan 6 device, and more specifically, the Digilent ATLYS development platform. The demo implements a TCP/IP socket interface, and a simple web application. So far the demonstration has been tested on a Ubuntu Linux only.

Dependencies
============

You will need:

+ Xilinx ISE 12.0 or later (webpack edition is free)
+ Python 2.7 or later (but not Python 3)
+ Chips-2.0 (Included)
+ Digilent `ATLYS <http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,836&Prod=ATLYS&CFID=3188339&CFTOKEN=15014968>`_  Spartan 6 Development Kit.
+ Digilent ADEPT2 `utility <http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,66,828&Prod=ADEPT2>`_ 
+ git

Install
=======

Clone the git the repository with git::

    $ git clone git@github.com:dawsonjon/Chips-Demo.git
    $ cd Chips-Demo
    $ git submodule init
    $ git submodule update

Chips Compile
=============

To compile the c code in chips, issue the following command in the project folder::

    $ ./atlys.py compile

Build in ISE 
============

Edit the Xilinx variable in the scripts/user_settings to point to the Xilinx ISE install directory. Then build the design using the following command::

    $ ./atlys.py build

Download to ATLYS 
=================

Power up the ATLYS, and connect the JTAG USB cable to your PC. Run the download command::

    $ ./atlys.py download

You can complete all three steps in one go using the *all* option::

    $ ./atlys.py all

Setup and Test
==============

::
        
        +----------------+                 +----------------+
        | PC             |                 | Digilent ATLYS |
        |                |   POWER =======>o                |
        |                |                 |                |
        |          USB   o<===============>o JTAG USB       |
        |                |                 |                |
        |          ETH0  o<===============>o ETHERNET       |
        |                |                 |                |
        | 192.168.1.0    |                 | 192.168.1.1    |
        +----------------+                 +----------------+

..

Connect the Ethernet port to ATLYS, using a crossed over Ethernet cable (which comes with the development kit).

Using the script, configure Ethernet port with IP address 192.168.1.0 and subnet mask 255.255.255.0. Turn off TCP Window Scaling and TCP time stamps::

    $ ./configure_network

Verify connection using ping command::

    $ ping 192.168.1.1
    PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
    64 bytes from 192.168.1.1: icmp_req=1 ttl=255 time=0.253 ms
    64 bytes from 192.168.1.1: icmp_req=2 ttl=255 time=0.371 ms
    64 bytes from 192.168.1.1: icmp_req=3 ttl=255 time=0.382 ms
    64 bytes from 192.168.1.1: icmp_req=4 ttl=255 time=0.250 ms
    ^C
    --- 192.168.1.1 ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 3000ms
    rtt min/avg/max/mdev = 0.250/0.314/0.382/0.062 ms

Connect to 192.168.1.1 using your favourite browser.

.. image:: https://raw.github.com/dawsonjon/Chips-Demo/master/images/screenshot.png
        :width: 75%

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.