OpenCores
URL https://opencores.org/ocsvn/udp_ip_stack/udp_ip_stack/trunk

Subversion Repositories udp_ip_stack

[/] [udp_ip_stack/] [trunk/] [bench/] [vhdl/] [UDP_complete_nomac_tb.vhd] - Rev 18

Compare with Previous | Blame | View Log

--------------------------------------------------------------------------------
-- Company: 
-- Engineer:
--
-- Create Date:   09:57:01 06/13/2011
-- Design Name:   
-- Module Name:   C:/Users/pjf/Documents/projects/fpga/xilinx/Network/udp1/UDP_complete_nomac_tb.vhd
-- Project Name:  udp1
-- Target Device:  
-- Tool versions:  
-- Description:   
-- 
-- VHDL Test Bench Created by ISE for module: UDP_Complete_nomac
-- 
-- Dependencies:
-- 
-- Revision:
-- Revision 0.01 - File Created
-- Revision 0.02 - Added test for IP broadcast tx
-- Revision 0.03 - Added tests for ARP timeout
-- Additional Comments:
--
-- Notes: 
-- This testbench has been automatically generated using types std_logic and
-- std_logic_vector for the ports of the unit under test.  Xilinx recommends
-- that these types always be used for the top-level I/O of a design in order
-- to guarantee that the testbench will bind correctly to the post-implementation 
-- simulation model.
--------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
use work.axi.all;
use work.ipv4_types.all;
use work.arp_types.all;
 
ENTITY UDP_complete_nomac_tb IS
END UDP_complete_nomac_tb;
 
ARCHITECTURE behavior OF UDP_complete_nomac_tb IS 
 
    -- Component Declaration for the Unit Under Test (UUT)
 
    COMPONENT UDP_Complete_nomac
	 generic (
			CLOCK_FREQ			: integer := 125000000;							-- freq of data_in_clk -- needed to timout cntr
			ARP_TIMEOUT			: integer := 60									-- ARP response timeout (s)
			);
    Port (
			-- UDP TX signals
			udp_tx_start			: in std_logic;							-- indicates req to tx UDP
			udp_txi					: in udp_tx_type;							-- UDP tx cxns
			udp_tx_result			: out std_logic_vector (1 downto 0);-- tx status (changes during transmission)
			udp_tx_data_out_ready: out std_logic;							-- indicates udp_tx is ready to take data
			-- UDP RX signals
			udp_rx_start			: out std_logic;							-- indicates receipt of udp header
			udp_rxo					: out udp_rx_type;
			-- IP RX signals
			ip_rx_hdr				: out ipv4_rx_header_type;
			-- system signals
			rx_clk					: in  STD_LOGIC;
			tx_clk					: in  STD_LOGIC;
			reset 					: in  STD_LOGIC;
			our_ip_address 		: in STD_LOGIC_VECTOR (31 downto 0);
			our_mac_address 		: in std_logic_vector (47 downto 0);
			control					: in udp_control_type;
			-- status signals
			arp_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- count of arp pkts received
			ip_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- number of IP pkts received for us
			-- MAC Transmitter
			mac_tx_tdata         : out  std_logic_vector(7 downto 0);	-- data byte to tx
			mac_tx_tvalid        : out  std_logic;							-- tdata is valid
			mac_tx_tready        : in std_logic;							-- mac is ready to accept data
			mac_tx_tfirst        : out  std_logic;							-- indicates first byte of frame
			mac_tx_tlast         : out  std_logic;							-- indicates last byte of frame
			-- MAC Receiver
			mac_rx_tdata         : in std_logic_vector(7 downto 0);	-- data byte received
			mac_rx_tvalid        : in std_logic;							-- indicates tdata is valid
			mac_rx_tready        : out  std_logic;							-- tells mac that we are ready to take data
			mac_rx_tlast         : in std_logic								-- indicates last byte of the trame
			);
    END COMPONENT;
 
 
 
	type state_type is (IDLE, WAIT_RX_DONE, DATA_OUT);
	type count_mode_type is (RST, INCR, HOLD);
	type set_clr_type is (SET, CLR, HOLD);
 
 
   --Inputs
   signal udp_tx_start_int : std_logic := '0';
   signal udp_tx_int : udp_tx_type;
   signal clk_int : std_logic := '0';
   signal reset : std_logic := '0';
   signal our_ip_address : std_logic_vector(31 downto 0) := (others => '0');
   signal our_mac_address : std_logic_vector(47 downto 0) := (others => '0');
   signal mac_tx_tready : std_logic := '0';
   signal mac_rx_tdata : std_logic_vector(7 downto 0) := (others => '0');
   signal mac_rx_tvalid : std_logic := '0';
   signal mac_rx_tlast : std_logic := '0';
	signal control			: udp_control_type;
 
 	--Outputs
   signal udp_rx_start_int : std_logic;
   signal udp_rx_int : udp_rx_type;
   signal ip_rx_hdr : ipv4_rx_header_type;
	signal udp_tx_result	: std_logic_vector (1 downto 0);
	signal udp_tx_data_out_ready_int: std_logic;
 
   signal arp_pkt_count : std_logic_vector(7 downto 0);
   signal ip_pkt_count : std_logic_vector(7 downto 0);
   signal mac_tx_tdata : std_logic_vector(7 downto 0);
   signal mac_tx_tvalid : std_logic;
   signal mac_tx_tfirst : std_logic;
   signal mac_tx_tlast : std_logic;
   signal mac_rx_tready : std_logic;
 
	signal pbtx_led : std_logic;
	signal pbtx : std_logic := '0';
 
	-- state signals
	signal state			: state_type;
	signal count			: unsigned (7 downto 0);
	signal tx_hdr			: udp_tx_header_type;
	signal tx_start_reg	: std_logic;
	signal tx_started_reg : std_logic;
	signal tx_fin_reg		: std_logic;
 
 
	-- control signals
	signal next_state		: state_type;
	signal set_state		: std_logic;
	signal set_count		: count_mode_type;
	signal set_hdr			: std_logic;
	signal set_tx_start	: set_clr_type;
	signal set_last		: std_logic;
	signal set_tx_started : set_clr_type;
	signal set_tx_fin 	: set_clr_type;
	signal first_byte_rx	: STD_LOGIC_VECTOR(7 downto 0);
 
 
 
   -- Clock period definitions
   constant clk_period : time := 8 ns;
 
BEGIN
 
	-- Instantiate the Unit Under Test (UUT)
   uut: UDP_Complete_nomac 
			generic map (
			 CLOCK_FREQ			=> 10,						-- artificially low count to enable pragmatic testing
			 ARP_TIMEOUT		=> 20
			 )
			 PORT MAP (
          udp_tx_start => udp_tx_start_int,
          udp_txi => udp_tx_int,
          udp_tx_result => udp_tx_result,
          udp_tx_data_out_ready => udp_tx_data_out_ready_int,
          udp_rx_start => udp_rx_start_int,
          udp_rxo => udp_rx_int,
          ip_rx_hdr => ip_rx_hdr,
          rx_clk => clk_int,
			 tx_clk => clk_int,
          reset => reset,
          our_ip_address => our_ip_address,
          our_mac_address => our_mac_address,
			 control => control,
          arp_pkt_count => arp_pkt_count,
          ip_pkt_count => ip_pkt_count,
          mac_tx_tdata => mac_tx_tdata,
          mac_tx_tvalid => mac_tx_tvalid,
          mac_tx_tready => mac_tx_tready,
          mac_tx_tfirst => mac_tx_tfirst,
          mac_tx_tlast => mac_tx_tlast,
          mac_rx_tdata => mac_rx_tdata,
          mac_rx_tvalid => mac_rx_tvalid,
          mac_rx_tready => mac_rx_tready,
          mac_rx_tlast => mac_rx_tlast
        );
 
   -- Clock process definitions
   clk_process :process
   begin
		clk_int <= '0';
		wait for clk_period/2;
		clk_int <= '1';
		wait for clk_period/2;
   end process;
 
 
   -- Stimulus process
   stim_proc: process
   begin		
      -- hold reset state for 100 ns.
      wait for 100 ns;	
 
		our_ip_address <= x"c0a80509";		-- 192.168.5.9
		our_mac_address <= x"002320212223";
		control.ip_controls.arp_controls.clear_cache <= '0';
      mac_tx_tready <= '0';
 
		reset <= '1';
      wait for clk_period*10;
		reset <= '0';
      wait for clk_period*5;
 
		-- check reset conditions
		assert udp_tx_result = UDPTX_RESULT_NONE		report "udp_tx_result not initialised correctly on reset";
		assert udp_tx_data_out_ready_int = '0' 		report "ip_udp_txitx.data.data_out_ready not initialised correctly on reset";
		assert mac_tx_tvalid = '0' 						report "mac_tx_tvalid not initialised correctly on reset";
		assert mac_tx_tlast = '0' 							report "mac_tx_tlast not initialised correctly on reset";
		assert arp_pkt_count = x"00"						report "arp_pkt_count not initialised correctly on reset";
		assert ip_pkt_count = x"00"						report "ip_pkt_count not initialised correctly on reset";
		assert udp_rx_start_int = '0' 							report "udp_rx_start not initialised correctly on reset";
		assert udp_rx_int.hdr.is_valid = '0'				report "udp_rx_int.hdr.is_valid not initialised correctly on reset";
		assert udp_rx_int.hdr.data_length = x"0000"		report "udp_rx_int.hdr.data_length not initialised correctly on reset";
		assert udp_rx_int.hdr.src_ip_addr = x"00000000"	report "udp_rx_int.hdr.src_ip_addr not initialised correctly on reset";
		assert udp_rx_int.hdr.src_port = x"0000"			report "udp_rx_int.hdr.src_port not initialised correctly on reset";
		assert udp_rx_int.hdr.dst_port = x"0000"			report "udp_rx_int.hdr.dst_port not initialised correctly on reset";
		assert udp_rx_int.data.data_in = x"00"				report "udp_rx_start.data.data_in not initialised correctly on reset";
		assert udp_rx_int.data.data_in_valid = '0'		report "udp_rx_start.data.data_in_valid not initialised correctly on reset";
		assert udp_rx_int.data.data_in_last = '0'			report "udp_rx_start.data.data_in_last not initialised correctly on reset";
		assert ip_rx_hdr.is_valid = '0'					report "ip_rx_hdr.is_valid not initialised correctly on reset";
		assert ip_rx_hdr.protocol = x"00"				report "ip_rx_hdr.protocol not initialised correctly on reset";
		assert ip_rx_hdr.data_length = x"0000"			report "ip_rx_hdr.data_length not initialised correctly on reset";
		assert ip_rx_hdr.src_ip_addr = x"00000000"	report "ip_rx_hdr.src_ip_addr not initialised correctly on reset";
		assert ip_rx_hdr.num_frame_errors = x"00"		report "ip_rx_hdr.num_frame_errors not initialised correctly on reset";
 
 
      -- insert stimulus here 
 
		------------
		-- TEST 1 -- send ARP request
		------------
 
		report "T1: Send an ARP request: who has 192.168.5.9? Tell 192.168.5.1";
 
      mac_tx_tready <= '1';
 
		mac_rx_tvalid <= '1';
		-- dst MAC (bc)
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		-- src MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- type
		mac_rx_tdata <= x"08"; wait for clk_period;
		mac_rx_tdata <= x"06"; wait for clk_period;
		-- HW type
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- Protocol type
		mac_rx_tdata <= x"08"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- HW size
		mac_rx_tdata <= x"06"; wait for clk_period;
		-- protocol size
		mac_rx_tdata <= x"04"; wait for clk_period;
		-- Opcode
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- Sender MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- Sender IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- Target MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- Target IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"09"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tlast <= '1';
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tlast <= '0';
		mac_rx_tvalid <= '0';
 
		-- check we got the ARP pkt
		assert arp_pkt_count = x"01"						report "T1: arp_pkt_count wrong value";
		assert ip_pkt_count = x"00"						report "T1: ip_pkt_count wrong value";
		assert udp_tx_result = UDPTX_RESULT_NONE		report "T1: udp_tx_result wrong value";
		assert udp_tx_data_out_ready_int = '0' 		report "T1: ip_udp_txitx.data.data_out_ready wrong value";
		assert udp_rx_start_int = '0' 							report "T1: udp_rx_start wrong value";
		assert udp_rx_int.hdr.is_valid = '0'				report "T1: udp_rx_int.hdr.is_valid wrong value";
		assert ip_rx_hdr.is_valid = '0'					report "T1: ip_rx_hdr.is_valid wrong value";
 
		-- check we tx a response
 
		wait for clk_period*25;
		assert mac_tx_tvalid = '1'							report "T1: not transmitting a response";
		wait for clk_period*25;
		assert mac_tx_tvalid = '0'							report "T1: tx held on for too long";
 
		------------
		-- TEST 2 -- send UDP pkt (same as sample from Java program)
		------------
 
		report "T2: Send UDP IP pkt dst ip_address c0a80509, from port f49a to port 2694";
 
		mac_rx_tvalid <= '1';
		-- dst MAC (bc)
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"20"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		mac_rx_tdata <= x"22"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		-- src MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- type
		mac_rx_tdata <= x"08"; wait for clk_period;		-- IP pkt
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- ver & HL / service type
		mac_rx_tdata <= x"45"; wait for clk_period;	
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- total len
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		-- ID
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"7a"; wait for clk_period;
		-- flags & frag
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- TTL
		mac_rx_tdata <= x"80"; wait for clk_period;
		-- Protocol
		mac_rx_tdata <= x"11"; wait for clk_period;
		-- Header CKS
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- SRC IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- DST IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"09"; wait for clk_period;
		-- SRC port
		mac_rx_tdata <= x"f4"; wait for clk_period;
		mac_rx_tdata <= x"9a"; wait for clk_period;
		-- DST port
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"94"; wait for clk_period;
		-- length
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"0d"; wait for clk_period;
		-- cks
		mac_rx_tdata <= x"8b"; wait for clk_period;
		mac_rx_tdata <= x"79"; wait for clk_period;
		-- user data
		mac_rx_tdata <= x"68"; wait for clk_period;
 
		-- since we are up to the user data stage, the header should be valid and the data_in_valid should be set
		assert udp_rx_int.hdr.is_valid = '1'				report "T2: udp_rx_int.hdr.is_valid not set";
		assert udp_rx_int.hdr.data_length = x"0005"		report "T2: udp_rx_int.hdr.data_length not set correctly";
		assert udp_rx_int.hdr.src_ip_addr = x"c0a80501"	report "T2: udp_rx_int.hdr.src_ip_addr not set correctly";
		assert udp_rx_int.hdr.src_port = x"f49a"			report "T2: udp_rx_int.hdr.src_port not set correctly";
		assert udp_rx_int.hdr.dst_port = x"2694"			report "T2: udp_rx_int.hdr.dst_port not set correctly";
 
		assert udp_rx_start_int = '1'							report "T2: udp_rx_start not set";
		assert udp_rx_int.data.data_in_valid = '1'		report "T2: udp_rx_int.data.data_in_valid not set";
 
		assert ip_rx_hdr.is_valid = '1'					report "T2: ip_rx_hdr.is_valid not set";
		assert ip_rx_hdr.protocol = x"11"				report "T2: ip_rx_hdr.protocol not set correctly";
		assert ip_rx_hdr.src_ip_addr = x"c0a80501"	report "T2: ip_rx.hdr.src_ip_addr not set correctly";
		assert ip_rx_hdr.num_frame_errors = x"00"   	report "T2: ip_rx.hdr.num_frame_errors not set correctly";
		assert ip_rx_hdr.last_error_code = x"0"		report "T2: ip_rx.hdr.last_error_code not set correctly";
 
		-- put the rest of the user data
		mac_rx_tdata <= x"65"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6f"; mac_rx_tlast <= '1'; wait for clk_period;
 
		assert udp_rx_int.data.data_in_last = '1'			report "T2: udp_rx_int.data.data_in_last not set";		
 
		mac_rx_tdata <= x"00";
		mac_rx_tlast <= '0';
		mac_rx_tvalid <= '0';
		wait for clk_period;
 
		assert udp_rx_int.data.data_in_valid = '0'		report "T2: udp_rx_int.data.data_in_valid not cleared";
		assert udp_rx_int.data.data_in_last = '0'			report "T2: udp_rx_int.data.data_in_last not cleared";
		assert udp_rx_start_int = '0'							report "T2: udp_rx_start not cleared";
		assert ip_rx_hdr.num_frame_errors = x"00"		report "T2: ip_rx_hdr.num_frame_errors non zero at end of test";
		assert ip_rx_hdr.last_error_code = x"0"		report "T2: ip_rx_hdr.last_error_code indicates error at end of test";
		assert ip_pkt_count = x"01"						report "T2: ip pkt cnt incorrect";
 
		wait for clk_period*20;
 
		------------
		-- TEST 3 -- send UDP pkt again (same as sample from Java program)
		------------
 
		report "T3: Send UDP IP pkt dst ip_address c0a80509, from port f49a to port 2694";
 
		mac_rx_tvalid <= '1';
		-- dst MAC (bc)
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"20"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		mac_rx_tdata <= x"22"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		-- src MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- type
		mac_rx_tdata <= x"08"; wait for clk_period;		-- IP pkt
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- ver & HL / service type
		mac_rx_tdata <= x"45"; wait for clk_period;	
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- total len
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		-- ID
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"7a"; wait for clk_period;
		-- flags & frag
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- TTL
		mac_rx_tdata <= x"80"; wait for clk_period;
		-- Protocol
		mac_rx_tdata <= x"11"; wait for clk_period;
		-- Header CKS
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- SRC IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- DST IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"09"; wait for clk_period;
		-- SRC port
		mac_rx_tdata <= x"f4"; wait for clk_period;
		mac_rx_tdata <= x"9a"; wait for clk_period;
		-- DST port
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"94"; wait for clk_period;
		-- length
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"0d"; wait for clk_period;
		-- cks
		mac_rx_tdata <= x"8b"; wait for clk_period;
		mac_rx_tdata <= x"79"; wait for clk_period;
		-- user data
		mac_rx_tdata <= x"68"; wait for clk_period;
 
		-- since we are up to the user data stage, the header should be valid and the data_in_valid should be set
		assert udp_rx_int.hdr.is_valid = '1'				report "T3: udp_rx_int.hdr.is_valid not set";
		assert udp_rx_int.hdr.data_length = x"0005"		report "T3: udp_rx_int.hdr.data_length not set correctly";
		assert udp_rx_int.hdr.src_ip_addr = x"c0a80501"	report "T3: udp_rx_int.hdr.src_ip_addr not set correctly";
		assert udp_rx_int.hdr.src_port = x"f49a"			report "T3: udp_rx_int.hdr.src_port not set correctly";
		assert udp_rx_int.hdr.dst_port = x"2694"			report "T3: udp_rx_int.hdr.dst_port not set correctly";
 
		assert udp_rx_start_int = '1'							report "T3: udp_rx_start not set";
		assert udp_rx_int.data.data_in_valid = '1'		report "T3: udp_rx_int.data.data_in_valid not set";
 
		assert ip_rx_hdr.is_valid = '1'					report "T3: ip_rx_hdr.is_valid not set";
		assert ip_rx_hdr.protocol = x"11"				report "T3: ip_rx_hdr.protocol not set correctly";
		assert ip_rx_hdr.src_ip_addr = x"c0a80501"	report "T3: ip_rx.hdr.src_ip_addr not set correctly";
		assert ip_rx_hdr.num_frame_errors = x"00"   	report "T3: ip_rx.hdr.num_frame_errors not set correctly";
		assert ip_rx_hdr.last_error_code = x"0"		report "T3: ip_rx.hdr.last_error_code not set correctly";
 
		-- put the rest of the user data
		mac_rx_tdata <= x"65"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6f"; mac_rx_tlast <= '1'; wait for clk_period;
 
		assert udp_rx_int.data.data_in_last = '1'			report "T3: udp_rx_int.data.data_in_last not set";		
 
		mac_rx_tdata <= x"00";
		mac_rx_tlast <= '0';
		mac_rx_tvalid <= '0';
		wait for clk_period;
 
		assert udp_rx_int.data.data_in_valid = '0'		report "T3: udp_rx_int.data.data_in_valid not cleared";
		assert udp_rx_int.data.data_in_last = '0'			report "T3: udp_rx_int.data.data_in_last not cleared";
		assert udp_rx_start_int = '0'							report "T3: udp_rx_start not cleared";
		assert ip_rx_hdr.num_frame_errors = x"00"		report "T3: ip_rx_hdr.num_frame_errors non zero at end of test";
		assert ip_rx_hdr.last_error_code = x"0"		report "T3: ip_rx_hdr.last_error_code indicates error at end of test";
		assert ip_pkt_count = x"02"						report "T3: ip pkt cnt incorrect";
 
		wait for clk_period*50;
 
		------------
		-- TEST 4 -- send UDP pkt with specific UDP data to force a broadcast tx in reply
		------------
 
		report "T4: Send UDP IP pkt dst ip_address c0a80509, from port f49a to port 2694";
 
		mac_rx_tvalid <= '1';
		-- dst MAC (bc)
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"20"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		mac_rx_tdata <= x"22"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		-- src MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- type
		mac_rx_tdata <= x"08"; wait for clk_period;		-- IP pkt
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- ver & HL / service type
		mac_rx_tdata <= x"45"; wait for clk_period;	
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- total len
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		-- ID
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"7a"; wait for clk_period;
		-- flags & frag
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- TTL
		mac_rx_tdata <= x"80"; wait for clk_period;
		-- Protocol
		mac_rx_tdata <= x"11"; wait for clk_period;
		-- Header CKS
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- SRC IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- DST IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"09"; wait for clk_period;
		-- SRC port
		mac_rx_tdata <= x"f4"; wait for clk_period;
		mac_rx_tdata <= x"9a"; wait for clk_period;
		-- DST port
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"94"; wait for clk_period;
		-- length
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"0d"; wait for clk_period;
		-- cks
		mac_rx_tdata <= x"8b"; wait for clk_period;
		mac_rx_tdata <= x"79"; wait for clk_period;
		-- user data
		mac_rx_tdata <= x"42"; wait for clk_period;		-- First byte 'B' triggers a reply to broadcast addr
 
		-- since we are up to the user data stage, the header should be valid and the data_in_valid should be set
		assert udp_rx_int.hdr.is_valid = '1'				report "T4: udp_rx_int.hdr.is_valid not set";
		assert udp_rx_int.hdr.data_length = x"0005"		report "T4: udp_rx_int.hdr.data_length not set correctly";
		assert udp_rx_int.hdr.src_ip_addr = x"c0a80501"	report "T4: udp_rx_int.hdr.src_ip_addr not set correctly";
		assert udp_rx_int.hdr.src_port = x"f49a"			report "T4: udp_rx_int.hdr.src_port not set correctly";
		assert udp_rx_int.hdr.dst_port = x"2694"			report "T4: udp_rx_int.hdr.dst_port not set correctly";
 
		assert udp_rx_start_int = '1'							report "T4: udp_rx_start not set";
		assert udp_rx_int.data.data_in_valid = '1'		report "T4: udp_rx_int.data.data_in_valid not set";
 
		assert ip_rx_hdr.is_valid = '1'					report "T4: ip_rx_hdr.is_valid not set";
		assert ip_rx_hdr.protocol = x"11"				report "T4: ip_rx_hdr.protocol not set correctly";
		assert ip_rx_hdr.src_ip_addr = x"c0a80501"	report "T4: ip_rx.hdr.src_ip_addr not set correctly";
		assert ip_rx_hdr.num_frame_errors = x"00"   	report "T4: ip_rx.hdr.num_frame_errors not set correctly";
		assert ip_rx_hdr.last_error_code = x"0"		report "T4: ip_rx.hdr.last_error_code not set correctly";
 
		-- put the rest of the user data
		mac_rx_tdata <= x"65"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6f"; mac_rx_tlast <= '1'; wait for clk_period;
 
		assert udp_rx_int.data.data_in_last = '1'			report "T4: udp_rx_int.data.data_in_last not set";		
 
		mac_rx_tdata <= x"00";
		mac_rx_tlast <= '0';
		mac_rx_tvalid <= '0';
		wait for clk_period;
 
		report "T4: waiting for mac data tx";
		wait until mac_tx_tvalid = '1';
		report "T4: starting mac data tx";
		wait for clk_period;
 
		-- check the mac data being transmitted
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T4: incorrect src mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T4: incorrect src mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T4: incorrect src mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"21"							report "T4: incorrect src mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"22"							report "T4: incorrect src mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T4: incorrect src mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"08"							report "T4: incorrect pkt_type 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect pkt type 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"45"							report "T4: incorrect ver.hlen";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect srv type";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect len 0";			wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T4: incorrect len 1";			wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T4: incorrect ident 0";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect ident 1";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect flag&frag 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect flag&frag 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"80"							report "T4: incorrect TTL";			wait for clk_period;
		assert mac_tx_tdata = x"11"							report "T4: incorrect protocol";		wait for clk_period;
		assert mac_tx_tdata = x"75"							report "T4: incorrect hdr.cks 0";	wait for clk_period;
		assert mac_tx_tdata = x"1c"							report "T4: incorrect hdr.cks 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"c0"							report "T4: incorrect src ip 0";		wait for clk_period;
		assert mac_tx_tdata = x"a8"							report "T4: incorrect src ip 1";		wait for clk_period;
		assert mac_tx_tdata = x"05"							report "T4: incorrect src ip 2";		wait for clk_period;
		assert mac_tx_tdata = x"09"							report "T4: incorrect src ip 3";		wait for clk_period;
 
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst ip 0";		wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst ip 1";		wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst ip 2";		wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T4: incorrect dst ip 3";		wait for clk_period;
 
		assert mac_tx_tdata = x"26"							report "T4: incorrect src port 0";	wait for clk_period;
		assert mac_tx_tdata = x"94"							report "T4: incorrect src port 1";	wait for clk_period;
		assert mac_tx_tdata = x"f4"							report "T4: incorrect dst port 0";	wait for clk_period;
		assert mac_tx_tdata = x"9a"							report "T4: incorrect dst port 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T4: incorrect udp len 0";	wait for clk_period;
		assert mac_tx_tdata = x"0c"							report "T4: incorrect udp len 1";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect udp cks 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T4: incorrect udp cks 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"40"							report "T4: incorrect udp data 0";	wait for clk_period;
		assert mac_tx_tdata = x"41"							report "T4: incorrect udp data 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"42"							report "T4: incorrect udp data 2";
		assert mac_tx_tlast = '0'								report "T4: tlast asserted too soon";	wait for clk_period;
		assert mac_tx_tdata = x"43"							report "T4: incorrect udp data 3";	
		assert mac_tx_tlast = '1'								report "T4: tlast not asserted";			wait for clk_period;
 
		assert udp_tx_result = IPTX_RESULT_SENT			report "T4: TX did not complete";
 
		assert udp_rx_int.data.data_in_valid = '0'		report "T4: udp_rx_int.data.data_in_valid not cleared";
		assert udp_rx_int.data.data_in_last = '0'			report "T4: udp_rx_int.data.data_in_last not cleared";
		assert udp_rx_start_int = '0'							report "T4: udp_rx_start not cleared";
		assert ip_rx_hdr.num_frame_errors = x"00"			report "T4: ip_rx_hdr.num_frame_errors non zero at end of test";
		assert ip_rx_hdr.last_error_code = x"0"			report "T4: ip_rx_hdr.last_error_code indicates error at end of test";
		assert ip_pkt_count = x"03"							report "T4: ip pkt cnt incorrect";
 
		------------
		-- TEST 5 -- send UDP pkt with dst=bc addr to ensure we can receive broadcast tx
		------------
 
		report "T5: Send UDP IP pkt dst ip_address bc, from port f49a to port 2694";
 
		mac_rx_tvalid <= '1';
		-- dst MAC (bc)
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		-- src MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- type
		mac_rx_tdata <= x"08"; wait for clk_period;		-- IP pkt
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- ver & HL / service type
		mac_rx_tdata <= x"45"; wait for clk_period;	
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- total len
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		-- ID
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"7a"; wait for clk_period;
		-- flags & frag
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- TTL
		mac_rx_tdata <= x"80"; wait for clk_period;
		-- Protocol
		mac_rx_tdata <= x"11"; wait for clk_period;
		-- Header CKS
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- SRC IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- DST IP
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		mac_rx_tdata <= x"ff"; wait for clk_period;
		-- SRC port
		mac_rx_tdata <= x"f4"; wait for clk_period;
		mac_rx_tdata <= x"9a"; wait for clk_period;
		-- DST port
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"94"; wait for clk_period;
		-- length
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"0d"; wait for clk_period;
		-- cks
		mac_rx_tdata <= x"8b"; wait for clk_period;
		mac_rx_tdata <= x"79"; wait for clk_period;
		-- user data
		mac_rx_tdata <= x"68"; wait for clk_period;
 
		-- since we are up to the user data stage, the header should be valid and the data_in_valid should be set
		assert udp_rx_int.hdr.is_valid = '1'				report "T5: udp_rx_int.hdr.is_valid not set";
		assert udp_rx_int.hdr.data_length = x"0005"		report "T5: udp_rx_int.hdr.data_length not set correctly";
		assert udp_rx_int.hdr.src_ip_addr = x"c0a80501"	report "T5: udp_rx_int.hdr.src_ip_addr not set correctly";
		assert udp_rx_int.hdr.src_port = x"f49a"			report "T5: udp_rx_int.hdr.src_port not set correctly";
		assert udp_rx_int.hdr.dst_port = x"2694"			report "T5: udp_rx_int.hdr.dst_port not set correctly";
 
		assert udp_rx_start_int = '1'							report "T5: udp_rx_start not set";
		assert udp_rx_int.data.data_in_valid = '1'		report "T5: udp_rx_int.data.data_in_valid not set";
 
		assert ip_rx_hdr.is_valid = '1'						report "T5: ip_rx_hdr.is_valid not set";
		assert ip_rx_hdr.protocol = x"11"					report "T5: ip_rx_hdr.protocol not set correctly";
		assert ip_rx_hdr.src_ip_addr = x"c0a80501"		report "T5: ip_rx.hdr.src_ip_addr not set correctly";
		assert ip_rx_hdr.num_frame_errors = x"00"   		report "T5: ip_rx.hdr.num_frame_errors not set correctly";
		assert ip_rx_hdr.last_error_code = x"0"			report "T5: ip_rx.hdr.last_error_code not set correctly";
 
		-- put the rest of the user data
		mac_rx_tdata <= x"65"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6f"; mac_rx_tlast <= '1'; wait for clk_period;
 
		assert udp_rx_int.data.data_in_last = '1'			report "T5: udp_rx_int.data.data_in_last not set";		
 
		mac_rx_tdata <= x"00";
		mac_rx_tlast <= '0';
		mac_rx_tvalid <= '0';
 
		report "T5: waiting for mac data tx";
		if mac_tx_tvalid = '0' then
			wait until mac_tx_tvalid = '1';
			wait for clk_period;
		end if;
		report "T5: starting mac data tx";
 
		-- check the mac data being transmitted
		assert mac_tx_tdata = x"00"							report "T5: incorrect dst mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T5: incorrect dst mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"18"							report "T5: incorrect dst mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"29"							report "T5: incorrect dst mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"26"							report "T5: incorrect dst mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"7c"							report "T5: incorrect dst mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T5: incorrect src mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T5: incorrect src mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T5: incorrect src mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"21"							report "T5: incorrect src mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"22"							report "T5: incorrect src mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T5: incorrect src mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"08"							report "T5: incorrect pkt_type 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect pkt type 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"45"							report "T5: incorrect ver.hlen";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect srv type";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect len 0";			wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T5: incorrect len 1";			wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T5: incorrect ident 0";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect ident 1";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect flag&frag 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect flag&frag 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"80"							report "T5: incorrect TTL";			wait for clk_period;
		assert mac_tx_tdata = x"11"							report "T5: incorrect protocol";		wait for clk_period;
		assert mac_tx_tdata = x"af"							report "T5: incorrect hdr.cks 0";	wait for clk_period;
		assert mac_tx_tdata = x"72"							report "T5: incorrect hdr.cks 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"c0"							report "T5: incorrect src ip 0";		wait for clk_period;
		assert mac_tx_tdata = x"a8"							report "T5: incorrect src ip 1";		wait for clk_period;
		assert mac_tx_tdata = x"05"							report "T5: incorrect src ip 2";		wait for clk_period;
		assert mac_tx_tdata = x"09"							report "T5: incorrect src ip 3";		wait for clk_period;
 
		assert mac_tx_tdata = x"c0"							report "T5: incorrect dst ip 0";		wait for clk_period;
		assert mac_tx_tdata = x"a8"							report "T5: incorrect dst ip 1";		wait for clk_period;
		assert mac_tx_tdata = x"05"							report "T5: incorrect dst ip 2";		wait for clk_period;
		assert mac_tx_tdata = x"01"							report "T5: incorrect dst ip 3";		wait for clk_period;
 
		assert mac_tx_tdata = x"26"							report "T5: incorrect src port 0";	wait for clk_period;
		assert mac_tx_tdata = x"94"							report "T5: incorrect src port 1";	wait for clk_period;
		assert mac_tx_tdata = x"f4"							report "T5: incorrect dst port 0";	wait for clk_period;
		assert mac_tx_tdata = x"9a"							report "T5: incorrect dst port 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T5: incorrect udp len 0";	wait for clk_period;
		assert mac_tx_tdata = x"0c"							report "T5: incorrect udp len 1";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect udp cks 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T5: incorrect udp cks 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"50"							report "T5: incorrect udp data 0";	wait for clk_period;
		assert mac_tx_tdata = x"51"							report "T5: incorrect udp data 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"52"							report "T5: incorrect udp data 2";
		assert mac_tx_tlast = '0'								report "T5: tlast asserted too soon";	wait for clk_period;
		assert mac_tx_tdata = x"53"							report "T5: incorrect udp data 3";	
		assert mac_tx_tlast = '1'								report "T5: tlast not asserted";			wait for clk_period;
 
		assert udp_tx_result = IPTX_RESULT_SENT			report "T5: TX did not complete";
 
		assert udp_rx_int.data.data_in_valid = '0'		report "T5: udp_rx_int.data.data_in_valid not cleared";
		assert udp_rx_int.data.data_in_last = '0'			report "T5: udp_rx_int.data.data_in_last not cleared";
		assert udp_rx_start_int = '0'							report "T5: udp_rx_start not cleared";
		assert ip_rx_hdr.num_frame_errors = x"00"			report "T5: ip_rx_hdr.num_frame_errors non zero at end of test";
		assert ip_rx_hdr.last_error_code = x"0"			report "T5: ip_rx_hdr.last_error_code indicates error at end of test";
		assert ip_pkt_count = x"04"							report "T5: ip pkt cnt incorrect";
 
 
		------------
		-- TEST 6 -- send UDP pkt with data to trigger the sending of a pkt to unknown IP addr to force an ARP timeout
		------------
 
		report "T6: Send UDP IP pkt dst ip_address c0a80509, from port f49a to port 2694 with data x43 to trig tx to unknown IP";
 
		mac_rx_tvalid <= '1';
		-- dst MAC (bc)
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"20"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		mac_rx_tdata <= x"22"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		-- src MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- type
		mac_rx_tdata <= x"08"; wait for clk_period;		-- IP pkt
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- ver & HL / service type
		mac_rx_tdata <= x"45"; wait for clk_period;	
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- total len
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		-- ID
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"7a"; wait for clk_period;
		-- flags & frag
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- TTL
		mac_rx_tdata <= x"80"; wait for clk_period;
		-- Protocol
		mac_rx_tdata <= x"11"; wait for clk_period;
		-- Header CKS
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- SRC IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- DST IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"09"; wait for clk_period;
		-- SRC port
		mac_rx_tdata <= x"f4"; wait for clk_period;
		mac_rx_tdata <= x"9a"; wait for clk_period;
		-- DST port
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"94"; wait for clk_period;
		-- length
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"0d"; wait for clk_period;
		-- cks
		mac_rx_tdata <= x"8b"; wait for clk_period;
		mac_rx_tdata <= x"79"; wait for clk_period;
		-- user data
		mac_rx_tdata <= x"43"; wait for clk_period;		-- First byte 'C' triggers a reply to unknown addr
 
		-- since we are up to the user data stage, the header should be valid and the data_in_valid should be set
		assert udp_rx_int.hdr.is_valid = '1'				report "T6: udp_rx_int.hdr.is_valid not set";
		assert udp_rx_int.hdr.data_length = x"0005"		report "T6: udp_rx_int.hdr.data_length not set correctly";
		assert udp_rx_int.hdr.src_ip_addr = x"c0a80501"	report "T6: udp_rx_int.hdr.src_ip_addr not set correctly";
		assert udp_rx_int.hdr.src_port = x"f49a"			report "T6: udp_rx_int.hdr.src_port not set correctly";
		assert udp_rx_int.hdr.dst_port = x"2694"			report "T6: udp_rx_int.hdr.dst_port not set correctly";
 
		assert udp_rx_start_int = '1'							report "T6: udp_rx_start not set";
		assert udp_rx_int.data.data_in_valid = '1'		report "T6: udp_rx_int.data.data_in_valid not set";
 
		assert ip_rx_hdr.is_valid = '1'						report "T6: ip_rx_hdr.is_valid not set";
		assert ip_rx_hdr.protocol = x"11"					report "T6: ip_rx_hdr.protocol not set correctly";
		assert ip_rx_hdr.src_ip_addr = x"c0a80501"		report "T6: ip_rx.hdr.src_ip_addr not set correctly";
		assert ip_rx_hdr.num_frame_errors = x"00"   		report "T6: ip_rx.hdr.num_frame_errors not set correctly";
		assert ip_rx_hdr.last_error_code = x"0"			report "T6: ip_rx.hdr.last_error_code not set correctly";
 
		-- put the rest of the user data
		mac_rx_tdata <= x"65"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6f"; mac_rx_tlast <= '1'; wait for clk_period;
 
		assert udp_rx_int.data.data_in_last = '1'			report "T6: udp_rx_int.data.data_in_last not set";		
 
		mac_rx_tdata <= x"00";
		mac_rx_tlast <= '0';
		mac_rx_tvalid <= '0';
		wait for clk_period;
 
		report "T6: waiting for mac data tx";
		wait until mac_tx_tvalid = '1';
		report "T6: starting mac data tx";
		wait for clk_period;
 
		-- check the mac data being transmitted is valid ARP request
		assert mac_tx_tdata = x"ff"							report "T6: incorrect dst mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect dst mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect dst mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect dst mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect dst mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect dst mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T6: incorrect src mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T6: incorrect src mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T6: incorrect src mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"21"							report "T6: incorrect src mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"22"							report "T6: incorrect src mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T6: incorrect src mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"08"							report "T6: incorrect pkt_type 0";	wait for clk_period;
		assert mac_tx_tdata = x"06"							report "T6: incorrect pkt type 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T6: incorrect HW type.0";	wait for clk_period;
		assert mac_tx_tdata = x"01"							report "T6: incorrect HW type.1";	wait for clk_period;
		assert mac_tx_tdata = x"08"							report "T6: incorrect prot.0";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T6: incorrect prot.1";		wait for clk_period;
		assert mac_tx_tdata = x"06"							report "T6: incorrect HW size";		wait for clk_period;
		assert mac_tx_tdata = x"04"							report "T6: incorrect prot size";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T6: incorrect opcode.0";		wait for clk_period;
		assert mac_tx_tdata = x"01"							report "T6: incorrect opcode.1";		wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T6: incorrect sndr mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T6: incorrect sndr mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T6: incorrect sndr mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"21"							report "T6: incorrect sndr mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"22"							report "T6: incorrect sndr mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T6: incorrect sndr mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"c0"							report "T6: incorrect sndr ip 0";	wait for clk_period;
		assert mac_tx_tdata = x"a8"							report "T6: incorrect sndr ip 1";	wait for clk_period;
		assert mac_tx_tdata = x"05"							report "T6: incorrect sndr ip 2";	wait for clk_period;
		assert mac_tx_tdata = x"09"							report "T6: incorrect sndr ip 3";	wait for clk_period;
 
		assert mac_tx_tdata = x"ff"							report "T6: incorrect trg mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect trg mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect trg mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect trg mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect trg mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"ff"							report "T6: incorrect trg mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"c0"							report "T6: incorrect trg ip 0";		wait for clk_period;
		assert mac_tx_tdata = x"bb"							report "T6: incorrect trg ip 1";		wait for clk_period;
		assert mac_tx_tdata = x"cc"							report "T6: incorrect trg ip 2";
		assert mac_tx_tlast = '0'								report "T6: tlast asserted too soon";	
		wait for clk_period;
 
		assert mac_tx_tdata = x"dd"							report "T6: incorrect trg ip 3";	
		assert mac_tx_tlast = '1'								report "T6: tlast should be set";
		wait for clk_period;
 
		assert udp_tx_result = IPTX_RESULT_SENDING		report "T6: TX should still be in sending phase";
 
		assert udp_rx_int.data.data_in_valid = '0'		report "T6: udp_rx_int.data.data_in_valid not cleared";
		assert udp_rx_int.data.data_in_last = '0'			report "T6: udp_rx_int.data.data_in_last not cleared";
		assert udp_rx_start_int = '0'							report "T6: udp_rx_start not cleared";
		assert ip_rx_hdr.num_frame_errors = x"00"			report "T6: ip_rx_hdr.num_frame_errors non zero at end of test";
		assert ip_rx_hdr.last_error_code = x"0"			report "T6: ip_rx_hdr.last_error_code indicates error at end of test";
		assert ip_pkt_count = x"05"							report "T6: ip pkt cnt incorrect";
 
		-- check for error on tx as a result of ARP timeout
 
		wait for clk_period*10*20;
		assert udp_tx_result = IPTX_RESULT_ERR				report "T6: TX should resulkt in error (arp timeout)";
 
		wait for clk_period*10;
 
		------------
		-- TEST 7 -- send UDP pkt again to ensure that we can rx a pkt and tx after a timeout
		------------
 
		report "T7: Send UDP IP pkt dst ip_address c0a80509, from port f49a to port 2694";
 
		mac_rx_tvalid <= '1';
		-- dst MAC (bc)
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"20"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		mac_rx_tdata <= x"22"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		-- src MAC
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"23"; wait for clk_period;
		mac_rx_tdata <= x"18"; wait for clk_period;
		mac_rx_tdata <= x"29"; wait for clk_period;
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"7c"; wait for clk_period;
		-- type
		mac_rx_tdata <= x"08"; wait for clk_period;		-- IP pkt
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- ver & HL / service type
		mac_rx_tdata <= x"45"; wait for clk_period;	
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- total len
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"21"; wait for clk_period;
		-- ID
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"7a"; wait for clk_period;
		-- flags & frag
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- TTL
		mac_rx_tdata <= x"80"; wait for clk_period;
		-- Protocol
		mac_rx_tdata <= x"11"; wait for clk_period;
		-- Header CKS
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"00"; wait for clk_period;
		-- SRC IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"01"; wait for clk_period;
		-- DST IP
		mac_rx_tdata <= x"c0"; wait for clk_period;
		mac_rx_tdata <= x"a8"; wait for clk_period;
		mac_rx_tdata <= x"05"; wait for clk_period;
		mac_rx_tdata <= x"09"; wait for clk_period;
		-- SRC port
		mac_rx_tdata <= x"f4"; wait for clk_period;
		mac_rx_tdata <= x"9a"; wait for clk_period;
		-- DST port
		mac_rx_tdata <= x"26"; wait for clk_period;
		mac_rx_tdata <= x"94"; wait for clk_period;
		-- length
		mac_rx_tdata <= x"00"; wait for clk_period;
		mac_rx_tdata <= x"0d"; wait for clk_period;
		-- cks
		mac_rx_tdata <= x"8b"; wait for clk_period;
		mac_rx_tdata <= x"79"; wait for clk_period;
		-- user data
		mac_rx_tdata <= x"68"; wait for clk_period;
 
		-- since we are up to the user data stage, the header should be valid and the data_in_valid should be set
		assert udp_rx_int.hdr.is_valid = '1'				report "T7: udp_rx_int.hdr.is_valid not set";
		assert udp_rx_int.hdr.data_length = x"0005"		report "T7: udp_rx_int.hdr.data_length not set correctly";
		assert udp_rx_int.hdr.src_ip_addr = x"c0a80501"	report "T7: udp_rx_int.hdr.src_ip_addr not set correctly";
		assert udp_rx_int.hdr.src_port = x"f49a"			report "T7: udp_rx_int.hdr.src_port not set correctly";
		assert udp_rx_int.hdr.dst_port = x"2694"			report "T7: udp_rx_int.hdr.dst_port not set correctly";
 
		assert udp_rx_start_int = '1'							report "T7: udp_rx_start not set";
		assert udp_rx_int.data.data_in_valid = '1'		report "T7: udp_rx_int.data.data_in_valid not set";
 
		assert ip_rx_hdr.is_valid = '1'						report "T7: ip_rx_hdr.is_valid not set";
		assert ip_rx_hdr.protocol = x"11"					report "T7: ip_rx_hdr.protocol not set correctly";
		assert ip_rx_hdr.src_ip_addr = x"c0a80501"		report "T7: ip_rx.hdr.src_ip_addr not set correctly";
		assert ip_rx_hdr.num_frame_errors = x"00"   		report "T7: ip_rx.hdr.num_frame_errors not set correctly";
		assert ip_rx_hdr.last_error_code = x"0"			report "T7: ip_rx.hdr.last_error_code not set correctly";
 
		-- put the rest of the user data
		mac_rx_tdata <= x"65"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6c"; wait for clk_period;
		mac_rx_tdata <= x"6f"; mac_rx_tlast <= '1'; wait for clk_period;
 
		assert udp_rx_int.data.data_in_last = '1'			report "T7: udp_rx_int.data.data_in_last not set";		
 
		mac_rx_tdata <= x"00";
		mac_rx_tlast <= '0';
		mac_rx_tvalid <= '0';
		wait for clk_period;
 
		-- there should be no ARP exchange as this entry should already be cached.
 
		report "T7: waiting for mac data tx";
		if mac_tx_tvalid = '0' then
			wait until mac_tx_tvalid = '1';
			wait for clk_period;
		end if;
		report "T7: starting mac data tx";
 
		-- check the mac data being transmitted
		assert mac_tx_tdata = x"00"							report "T7: incorrect dst mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T7: incorrect dst mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"18"							report "T7: incorrect dst mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"29"							report "T7: incorrect dst mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"26"							report "T7: incorrect dst mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"7c"							report "T7: incorrect dst mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T7: incorrect src mac 0";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T7: incorrect src mac 1";	wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T7: incorrect src mac 2";	wait for clk_period;
		assert mac_tx_tdata = x"21"							report "T7: incorrect src mac 3";	wait for clk_period;
		assert mac_tx_tdata = x"22"							report "T7: incorrect src mac 4";	wait for clk_period;
		assert mac_tx_tdata = x"23"							report "T7: incorrect src mac 5";	wait for clk_period;
 
		assert mac_tx_tdata = x"08"							report "T7: incorrect pkt_type 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect pkt type 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"45"							report "T7: incorrect ver.hlen";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect srv type";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect len 0";			wait for clk_period;
		assert mac_tx_tdata = x"20"							report "T7: incorrect len 1";			wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T7: incorrect ident 0";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect ident 1";		wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect flag&frag 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect flag&frag 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"80"							report "T7: incorrect TTL";			wait for clk_period;
		assert mac_tx_tdata = x"11"							report "T7: incorrect protocol";		wait for clk_period;
		assert mac_tx_tdata = x"af"							report "T7: incorrect hdr.cks 0";	wait for clk_period;
		assert mac_tx_tdata = x"72"							report "T7: incorrect hdr.cks 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"c0"							report "T7: incorrect src ip 0";		wait for clk_period;
		assert mac_tx_tdata = x"a8"							report "T7: incorrect src ip 1";		wait for clk_period;
		assert mac_tx_tdata = x"05"							report "T7: incorrect src ip 2";		wait for clk_period;
		assert mac_tx_tdata = x"09"							report "T7: incorrect src ip 3";		wait for clk_period;
 
		assert mac_tx_tdata = x"c0"							report "T7: incorrect dst ip 0";		wait for clk_period;
		assert mac_tx_tdata = x"a8"							report "T7: incorrect dst ip 1";		wait for clk_period;
		assert mac_tx_tdata = x"05"							report "T7: incorrect dst ip 2";		wait for clk_period;
		assert mac_tx_tdata = x"01"							report "T7: incorrect dst ip 3";		wait for clk_period;
 
		assert mac_tx_tdata = x"26"							report "T7: incorrect src port 0";	wait for clk_period;
		assert mac_tx_tdata = x"94"							report "T7: incorrect src port 1";	wait for clk_period;
		assert mac_tx_tdata = x"f4"							report "T7: incorrect dst port 0";	wait for clk_period;
		assert mac_tx_tdata = x"9a"							report "T7: incorrect dst port 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"00"							report "T7: incorrect udp len 0";	wait for clk_period;
		assert mac_tx_tdata = x"0c"							report "T7: incorrect udp len 1";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect udp cks 0";	wait for clk_period;
		assert mac_tx_tdata = x"00"							report "T7: incorrect udp cks 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"40"							report "T7: incorrect udp data 0";	wait for clk_period;
		assert mac_tx_tdata = x"41"							report "T7: incorrect udp data 1";	wait for clk_period;
 
		assert mac_tx_tdata = x"42"							report "T7: incorrect udp data 2";
		assert mac_tx_tlast = '0'								report "T7: tlast asserted too soon";	wait for clk_period;
		assert mac_tx_tdata = x"43"							report "T7: incorrect udp data 3";	
		assert mac_tx_tlast = '1'								report "T7: tlast not asserted";			wait for clk_period;
 
		assert udp_tx_result = IPTX_RESULT_SENT			report "T7: TX did not complete";
 
		assert udp_rx_int.data.data_in_valid = '0'		report "T7: udp_rx_int.data.data_in_valid not cleared";
		assert udp_rx_int.data.data_in_last = '0'			report "T7: udp_rx_int.data.data_in_last not cleared";
		assert udp_rx_start_int = '0'							report "T7: udp_rx_start not cleared";
		assert ip_rx_hdr.num_frame_errors = x"00"			report "T7: ip_rx_hdr.num_frame_errors non zero at end of test";
		assert ip_rx_hdr.last_error_code = x"0"			report "T7: ip_rx_hdr.last_error_code indicates error at end of test";
		assert ip_pkt_count = x"06"							report "T7: ip pkt cnt incorrect";
 
 
		report "--- end of tests ---";
      wait;
   end process;
 
	-- AUTO TX process - on receipt of any UDP pkt, send a response. data sent is modified if a broadcast was received.
 
		-- TX response process - COMB
   tx_proc_combinatorial: process(
		-- inputs
		udp_rx_start_int, udp_rx_int, udp_tx_data_out_ready_int, udp_tx_result, ip_rx_hdr,
		udp_tx_int.data.data_out_valid, PBTX,
		-- state
		state, count, tx_hdr, tx_start_reg, tx_started_reg, tx_fin_reg, 
		-- controls
		next_state, set_state, set_count, set_hdr, set_tx_start, set_last, 
		set_tx_started, set_tx_fin, first_byte_rx
		)
   begin
		-- set output_followers
		udp_tx_int.hdr <= tx_hdr;
		udp_tx_int.data.data_out_last <= set_last;
		udp_tx_start_int <= tx_start_reg;
 
		-- set control signal defaults
		next_state <= IDLE;
		set_state <= '0';
		set_count <= HOLD;
		set_hdr <= '0';
		set_tx_start <= HOLD;
		set_last <= '0';
		set_tx_started <= HOLD;
		set_tx_fin <= HOLD;
		first_byte_rx <= (others => '0');
 
		-- FSM
		case state is
 
			when IDLE =>
				udp_tx_int.data.data_out <= (others => '0');
				udp_tx_int.data.data_out_valid <= '0';
				if udp_rx_start_int = '1' or PBTX = '1' then
					if udp_rx_start_int = '1' then
						first_byte_rx <= udp_rx_int.data.data_in;
					else
						first_byte_rx <= x"00";
					end if;
					set_tx_fin <= CLR;
					set_count <= RST;
					set_hdr <= '1';
					if udp_rx_int.data.data_in_last = '1' then
						set_tx_started <= SET;
						set_tx_start <= SET;
						next_state <= DATA_OUT;
						set_state <= '1';
					else
						next_state <= WAIT_RX_DONE;
						set_state <= '1';
					end if;
				end if;
 
			when WAIT_RX_DONE =>
				-- wait until RX pkt fully received
				if udp_rx_int.data.data_in_last = '1' then
					set_tx_started <= SET;
					set_tx_start <= SET;
					next_state <= DATA_OUT;
					set_state <= '1';
				end if;
 
			when DATA_OUT =>
				if udp_tx_result = UDPTX_RESULT_ERR then
					-- have an error from the IP TX layer, clear down the TX
					set_tx_start <= CLR;
					set_tx_fin <= SET;
					set_tx_started <= CLR;
					next_state <= IDLE;
					set_state <= '1';
				else
					if udp_tx_result = UDPTX_RESULT_SENDING then
						set_tx_start <= CLR;		-- reset out start req as soon as we know we are sending
					end if;
					if ip_rx_hdr.is_broadcast = '1' then
						udp_tx_int.data.data_out <= std_logic_vector(count) or x"50";
					else
						udp_tx_int.data.data_out <= std_logic_vector(count) or x"40";
					end if;
					udp_tx_int.data.data_out_valid <= udp_tx_data_out_ready_int;
					if udp_tx_data_out_ready_int = '1' then
						if unsigned(count) = x"03" then						
							set_last <= '1';
							set_tx_fin <= SET;
							set_tx_started <= CLR;
							next_state <= IDLE;
							set_state <= '1';
						else
							set_count <= INCR;
						end if;
					end if;
				end if;
 
		end case;
	end process;
 
 
 
   -- TX response process - SEQ
   tx_proc_sequential: process(clk_int)
   begin		
		if rising_edge(clk_int) then
			if reset = '1' then
				-- reset state variables
				state <= IDLE;
				count <= x"00";
				tx_start_reg <= '0';
				tx_hdr.dst_ip_addr <= (others => '0');
				tx_hdr.dst_port <= (others => '0');
				tx_hdr.src_port <= (others => '0');
				tx_hdr.data_length <= (others => '0');
				tx_hdr.checksum <= (others => '0');
				tx_started_reg <= '0';
				tx_fin_reg <= '0';
				PBTX_LED <= '0';
			else
				PBTX_LED <= PBTX;
 
				-- Next rx_state processing
				if set_state = '1' then
					state <= next_state;
				else
					state <= state;
				end if;
 
				-- count processing
				case set_count is
					when RST =>  		count <= x"00";
					when INCR => 		count <= count + 1;
					when HOLD => 		count <= count;
				end case;
 
				-- set tx hdr
				if set_hdr = '1' then
					-- if the first byte of the rx pkt is 'B' then send to broadcast, otherwise send to reply IP
					if first_byte_rx = x"42" then
						tx_hdr.dst_ip_addr <= IP_BC_ADDR;	-- send to Broadcast addr
					elsif first_byte_rx = x"43" then
						tx_hdr.dst_ip_addr <= x"c0bbccdd";	-- set dst unknown so get ARP timeout
					else
						tx_hdr.dst_ip_addr <= udp_rx_int.hdr.src_ip_addr;	-- reply to sender
					end if;
					tx_hdr.dst_port <= udp_rx_int.hdr.src_port;
					tx_hdr.src_port <= udp_rx_int.hdr.dst_port;
					tx_hdr.data_length <= x"0004";
					tx_hdr.checksum <= x"0000";
				else
					tx_hdr <= tx_hdr;
				end if;
 
				-- set tx start signal
				case set_tx_start is
					when SET  => tx_start_reg <= '1';
					when CLR  => tx_start_reg <= '0';
					when HOLD => tx_start_reg <= tx_start_reg;
				end case;
 
				-- set tx started signal
				case set_tx_started is
					when SET  => tx_started_reg <= '1';
					when CLR  => tx_started_reg <= '0';
					when HOLD => tx_started_reg <= tx_started_reg;
				end case;
 
				-- set tx finished signal
				case set_tx_fin is
					when SET  => tx_fin_reg <= '1';
					when CLR  => tx_fin_reg <= '0';
					when HOLD => tx_fin_reg <= tx_fin_reg;
				end case;
 
 
			end if;
		end if;
 
	end process;
 
END;
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.