OpenCores
URL https://opencores.org/ocsvn/wf3d/wf3d/trunk

Subversion Repositories wf3d

[/] [wf3d/] [trunk/] [implement/] [rtl/] [axi_cmn/] [fm_ififo.v] - Rev 5

Go to most recent revision | Compare with Previous | Blame | View Log

//=======================================================================
// Project Monophony
//   Wire-Frame 3D Graphics Accelerator IP Core
//
// File:
//   fm_ififo.v
//
// Abstract:
//   FIFO for Memory Interconnect
//
// Author:
//   Kenji Ishimaru (info.wf3d@gmail.com)
//
//======================================================================
//
// Copyright (c) 2016, Kenji Ishimaru
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
//  -Redistributions of source code must retain the above copyright notice,
//   this list of conditions and the following disclaimer.
//  -Redistributions in binary form must reproduce the above copyright notice,
//   this list of conditions and the following disclaimer in the documentation
//   and/or other materials provided with the distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Revision History
 
module fm_ififo (
  clk_core,
  rst_x,
  i_wstrobe,
  i_dt,
  o_full,
  i_renable,
  o_dt,
  o_empty
);
 
// set default parameters
parameter WIDTH = 32;
////////////////////////////
// I/O definitions
////////////////////////////
input         i_wstrobe;      // write strobe
input  [WIDTH-1:0] i_dt;      // write data
output        o_full;         // write data full
input         i_renable;      // read enable
output [WIDTH-1:0] o_dt;      // read data
output        o_empty;        // read data empty
input         clk_core;        // system clock
input         rst_x;          // system reset
 
/////////////////////////
//  Register definitions
/////////////////////////
reg [2:0] rs_write_counter;
reg [2:0] rs_read_counter;
// data registers
reg [WIDTH-1:0] rs_data_buffer[0:4];  // only 5 data
reg [2:0] rs_status;
/////////////////////////
//  wire definitions
/////////////////////////
wire             o_full;
wire             o_empty;
wire [WIDTH-1:0] o_dt;
wire [1:0]       w_status;
wire             w_we;
wire             w_re;
reg [2:0] w_next_write_counter;
reg [2:0] w_next_read_counter;
/////////////////////////
//  assign statements
/////////////////////////
assign o_full  = (rs_status == 5);
assign o_empty = (rs_status == 0);
assign o_dt = rs_data_buffer[rs_read_counter];
assign w_we = !o_full & i_wstrobe;
assign w_re = i_renable & !o_empty;
assign w_status = {w_re,w_we};
 
always @(*) begin
  if (rs_write_counter == 3'd4) w_next_write_counter = 3'd0; 
  else w_next_write_counter = rs_write_counter +1'b1;
end
 
always @(*) begin
 if (rs_read_counter == 3'd4) w_next_read_counter = 3'd0; 
 else w_next_read_counter = rs_read_counter +1'b1;
end
 
////////////////////////
// Behaviour
///////////////////////
  // write side
  always @(posedge clk_core or negedge rst_x) begin
    if (~rst_x) begin
      rs_write_counter <= 'd0;
    end else begin
      if (w_we) begin
        rs_write_counter <= w_next_write_counter;
      end
    end
  end
  integer i;
 
  always @(posedge clk_core or negedge rst_x) begin
    if (~rst_x) begin
      for (i = 0; i < 5; i = i + 1) begin
        rs_data_buffer[i] <= 0;
      end
    end else begin
      if (w_we) begin
        rs_data_buffer[rs_write_counter] <= i_dt;
      end
    end
  end
 
  // read side
  always @(posedge clk_core or negedge rst_x) begin
    if (~rst_x) begin
      rs_read_counter <= 'd0;
    end else begin
      if (w_re) begin
        rs_read_counter <= w_next_read_counter;
      end
    end
  end
  // status counter
  always @(posedge clk_core or negedge rst_x) begin
    if (~rst_x) begin
      rs_status <= 'd0;
    end else begin
      case (w_status)
        2'b01:  rs_status <= rs_status + 1'b1; // write
        2'b10:  rs_status <= rs_status - 1'b1; // read
        default:  rs_status <= rs_status;      // nothing to do 
      endcase
    end
  end
 
endmodule
 
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.