OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [bench/] [asm/] [helloworld.S] - Rev 159

Go to most recent revision | Compare with Previous | Blame | View Log

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Filename:     helloworld.S
;
; Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
;
; Purpose:      A test of whether or not we can scroll a message on a
;               seven segment display.  This depends upon the seven segment
;               display driver (not included) being installed at position
;               0x15 in memory.  If so, this scrolls the message:
;               "HELLO UJorld." across the 4 seven segment display digits.
;
;               This test discovered that right shifting by 31 or more did
;               not result in zero as desired.  It also discovered that the
;               .DAT assembly instruction did not function as desired.  Both
;               bugs were fixed to get this to work.
;
; Creator:      Dan Gisselquist, Ph.D.
;               Gisselquist Technology, LLC
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Copyright (C) 2015, Gisselquist Technology, LLC
;
; This program is free software (firmware): you can redistribute it and/or
; modify it under the terms of  the GNU General Public License as published
; by the Free Software Foundation, either version 3 of the License, or (at
; your option) any later version.
;
; This program is distributed in the hope that it will be useful, but WITHOUT
; ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
; for more details.
;
; License:      GPL, v3, as defined and found on www.gnu.org,
;               http://www.gnu.org/licenses/gpl.html
;
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Register map
;       R12 peripherals
;       R11  timer length
;       R10  value to clear/reset the PIC
;       uR12 = memory
;       uR11 = rawsseg
;       uR9  = state
;       R8   = new value for SSEG
        .file "helloworld.S"
        .text
        .globl  entry
        .org 0x2000
        .type   entry, @function
entry:
build_supervisor_state:
        .set peripheral_base, 0xc0000000<<2
        LDI     build_supervisor_state,R0
        LDI     peripheral_base,R12
        LDI     0xc0000000,R12  ; Load a pointer to our peripherals
        LDI     $0x5f5e1,R11    ; An amount to reset the timer to: 1/4 sec
        LSL     $6,R11
        LDI     0x8010ffff,R0   ; A value to clear/reset the PIC for timerA inst
        MOV     user_data(PC),uR12      ; User memory (so this isn't supervisor state..)
        ; BRA   $4
        BRA     build_user_state
user_data:
        .INT    0x6e9e1c1c      ; Raw SSEG for 'HELL'
        .INT    0xfc007c70      ; Raw SSEG for 'O UJ'
        .INT    0x3a0a607b      ; Raw SSEG for 'orld.'
        .INT    0x00000000      ; Raw SSEG for '    '
        .text
build_user_state:
        LDI     $0x15,R0
        MOV     R0,uR11
        MOV     user_task(PC),uPC
        CLR     R0
        MOV     R0,uR9
repeat:
        STO     R11,$4(R12)     ; Reset the timer
        STO     R10,(R12)       ; Reset the PIC
        RTU
        ; BRA   $-4
        BRA     repeat
user_task:
        MOV     R9,R0
        LSR     $2,R0
        ADD     R12,R0
        LOD     (R0),R8         ; Read the left word
        MOV     R9,R1           ; Rotate it into place
        AND     $3,R1
        LSL     $3,R1           ; Multiply by eight
        LSL     R1,R8           ; Shift words to left by 0,8,16,24 bits

        ADD     $1,R0           ; Calculate address of next word
        CMP     $4+R12,R0
        SUB.GE  $4,R0
        LOD     (R0),R2         ; Load the next word into a building location
        LDI     $32,R3
        SUB     R1,R3
        LSR     R3,R2
        OR      R2,R8           ; Put the two together

        STO     R8,(R11)        ; Store the result

        ADD     $1,R9           ; Increment our state
        AND     $15,R9

        WAIT                    ; Wait for the next interrupt
        ; BRA   $-21            ; Back up to the top to start over
        BRA     user_task

        BREAK
        BREAK
        BREAK



Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.