OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sim/] [verilator/] [Makefile] - Rev 207

Go to most recent revision | Compare with Previous | Blame | View Log

################################################################################
#
# Filename:     Makefile
#
# Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
#
# Purpose:      This makefile builds the final verilator simulation of the
#               zipsystem.  Specifically, it builds the final C++ portion
#       of the simulator, and thus the final simulator executable.
#
#       This simulator depends upon the libelf and ncurses libraries.
#
#       Useful targets of this makefile include:
#
#       zippy_tb (default)
#               This is the test bench program / simulator that is built by
#               this directory.
#
#       test
#               Runs the simulator on a test program found in the trunk/sw/zasm
#               directory.  That program needs to be built via 'make test' in
#               that directory before this make test will work.  Changes to the
#               test itself will require a 'make test' in trunk/sw/zasm as well
#               as 'make test' in this directory.
#
#               The test itself consists of two tests.  The first, the "step"
#               test, tests whether the test works via "step"ing the CPU.
#               This would be the interface to the CPU were the CPU placed in
#               a device.
#
#               The second test is an internal test which works by just running
#               the CPU without step instructions.
#
#               In either case the test is over upon reaching either a HALT
#               or a BUSY instruction.  A HALT instruction indicates success,
#               BUSY a failure.
#
#       stest
#               Runs the test in "step" mode as described above.
#
#       itest
#               Runs the test file in interactive mode.  The CPU will not
#               execute any instructions without user interaction.  This is
#               useful for actually debugging the test.  The other two modes
#               are useful for quickly determining that the CPU does (or
#               doesn't) work.
#
#       dhrystone
#               Runs a hand-optimized version of the dhrystone benchmark.
#               Using the instructions at the top of the dhrystone assembly
#               file, you should be able to convert the result to DMIPS or even
#               DMIPS/MHz.
#
#       div_tb
#               A raw test bench to test the divide unit separate from the
#               rest of the CPU.  This test will fail with a failed assert()
#               if unsuccessful, or complete with no error (but lots of
#               debugging output) if successful.  To actually run this test,
#               you'll need to run ./div_tb (no arguments necessary).
#
#       mpy_tb
#               A raw test bench to test the multiply instructions within the
#               cpuops (ALU) unit separate from the rest of the CPU.  For more
#               details, look at the usage statement wtihin mpy_tb.
#
#       pfcache_tb
#
#       zipmmu_tb
#               Like div_tb, this is another raw component test bench.  In this
#               case, zipmmu_tb tests whether or not the MMU works when
#               separated from the rest of the CPU.
#
#       pdump
#               zippy_tb can be configured to produce a profile output that is
#               very useful when debugging the Dhrystone benchmark.  (It is
#               so configured by default.)  This file will be name pfile.bin.
#               pdump is a very simple program designed to read this file and
#               produce some (very raw) information from it.  To use this,
#               type pdump and the name of the executable file, such as
#               ../asm/zipdhry.z, and examine how many times each instruction
#               was executed, and how many stalls took place between each
#               instruction and the next.
#
#       clean
#               Removes all products of compilation--specifically zippy_tb,
#               pdump and div_tb.
#
#
# Creator:      Dan Gisselquist, Ph.D.
#               Gisselquist Technology, LLC
#
################################################################################
#
# Copyright (C) 2015-2017, Gisselquist Technology, LLC
#
# This program is free software (firmware): you can redistribute it and/or
# modify it under the terms of  the GNU General Public License as published
# by the Free Software Foundation, either version 3 of the License, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# License:      GPL, v3, as defined and found on www.gnu.org,
#               http://www.gnu.org/licenses/gpl.html
#
#
################################################################################
#
all: zippy_tb pdump div_tb mpy_tb pfcache_tb # zipmmu_tb

CXX     := g++
CFLAGS  := -Wall -Og -g
OBJDIR  := obj-pc
ZASM    := ../../sw/zasm
RTLD    := ../../rtl
RTLOBJD := $(RTLD)/obj_dir
BENCHOBJD:= ../../bench/rtl/obj_dir
VERILATOR_ROOT ?= $(shell bash -c 'verilator -V|grep VERILATOR_ROOT | head -1 | sed -e " s/^.*=\s*//"')
VROOT   := $(VERILATOR_ROOT)
VINCS   := -I$(VROOT)/include -I$(VROOT)/include/vltstd
INCS    := -I$(RTLOBJD) -I$(RTLD) -I$(ZASM) $(VINCS)
ZLIBSRCS:= zipelf.cpp twoc.cpp byteswap.cpp
SOURCES := $(ZLIBSRCS) pdump.cpp zippy_tb.cpp memsim.cpp
ZDSMSRCS:= zopcodes.cpp
ZOBJS   := $(addprefix $(OBJDIR)/,$(subst .cpp,.o,$(ZLIBSRCS) $(ZDSMSRCS)))
SIMSRCS := zippy_tb.cpp memsim.cpp $(ZLIBSRCS) $(ZDMSRCS)
SIMOBJS := $(addprefix $(OBJDIR)/,$(subst .cpp,.o,$(SIMSRCS) $(ZDSMSRCS)))
VLSRCS  := verilated.cpp verilated_vcd_c.cpp
VLOBJS := $(OBJDIR)/verilated.o $(OBJDIR)/verilated_vcd_c.o
VLIB    := $(addprefix $(VROOT)/include/,$(VLSRCS))
RAWLIB  := $(RTLOBJD)/Vzipsystem__ALL.a
LIBS    := $(RAWLIB) -lncurses -lelf
TESTF   := $(ZASM)/z.out
DHRYSTONEF := ../asm/zipdhry.z

$(OBJDIR)/%.o: %.cpp
        $(CXX) $(CFLAGS) $(INCS) -c $< -o $@

$(OBJDIR)/%.o: $(ZASM)/%.cpp
        $(CXX) $(CFLAGS) $(INCS) -c $< -o $@

$(OBJDIR)/%.o: $(VROOT)/include/%.cpp
        $(CXX) $(CFLAGS) $(INCS) -c $< -o $@

zippy_tb: $(SIMOBJS) $(VLOBJS) $(RAWLIB)
        $(CXX) $(CFLAGS) $(INCS) $(SIMOBJS) $(VLOBJS) $(RAWLIB) $(LIBS) -o $@

div_tb: div_tb.cpp twoc.cpp $(VLIB) $(RTLOBJD)/Vdiv__ALL.a testb.h
        $(CXX) $(CFLAGS) $(INCS) div_tb.cpp twoc.cpp $(VLIB) $(RTLOBJD)/Vdiv__ALL.a -o $@

mpy_tb: mpy_tb.cpp twoc.cpp $(VLIB) $(RTLOBJD)/Vcpuops__ALL.a testb.h
        $(CXX) $(CFLAGS) $(INCS) mpy_tb.cpp twoc.cpp $(VLIB) $(RTLOBJD)/Vcpuops__ALL.a -o $@

zipmmu_tb: zipmmu_tb.cpp $(VLIB) $(BENCHOBJD)/Vzipmmu_tb__ALL.a
        $(CXX) $(CFLAGS) $(INCS) -I$(BENCHOBJD) zipmmu_tb.cpp $(VLIB) $(BENCHOBJD)/Vzipmmu_tb__ALL.a -o $@

pfcache_tb: $(OBJDIR)/pfcache_tb.o $(OBJDIR)/memsim.o $(OBJDIR)/byteswap.o
pfcache_tb: $(VLIB) $(RTLOBJD)/Vpfcache__ALL.a
        $(CXX) $(CFLAGS) $(INCS) -I$(RTLOBJD) $(OBJDIR)/pfcache_tb.o $(OBJDIR)/memsim.o $(OBJDIR)/byteswap.o $(VLIB) $(RTLOBJD)/Vpfcache__ALL.a -o $@

pdump: pdump.cpp $(ZOBJS) $(OBJDIR)/zopcodes.o $(OBJDIR)/pdump.o
pdump: $(ZASM)/zopcodes.h testb.h byteswap.h zipelf.h
        $(CXX) $(CFLAGS) $(INCS) $(OBJDIR)/pdump.o $(ZOBJS) -lelf -o $@

.PHONY: stest
stest: zippy_tb
        ./zippy_tb -s $(TESTF)

.PHONY: itest
itest: zippy_tb
        ./zippy_tb $(TESTF)

.PHONY: test
test: zippy_tb stest
        ./zippy_tb -a $(TESTF)

.PHONY: dhrystone
dhrystone: zippy_tb
        ./zippy_tb -a $(DHRYSTONEF)

define  build-depends
        @echo "Building dependencies"
        @$(CXX) $(CPPFLAGS) $(INCS) -MM $(VLIB) $(SOURCES) > $(OBJDIR)/xdepends.txt
        @sed -e 's/^.*.o: /$(OBJDIR)\/&/' < $(OBJDIR)/xdepends.txt > $(OBJDIR)/depends.txt
        @rm $(OBJDIR)/xdepends.txt
endef

tags: $(VLIB) $(SOURCES)
        @ctags $(SOURCES) $(VLIB)

.PHONY: depends
depends: tags $(OBJDIR)/
        $(build-depends)

$(OBJDIR)/:
        @bash -c "if [ ! -e $(OBJDIR) ]; then mkdir -p $(OBJDIR)/; fi"

$(OBJDIR)/depends.txt: $(OBJDIR)/ depends

.PHONY: clean
clean:
        rm -rf $(OBJDIR)/
        rm -rf ./zippy_tb pdump div_tb mpy_tb

-include $(OBJDIR)/depends.txt

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.