OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk] - Rev 38

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
38 support 128-bit wishbone now used for a25 core csantifort 4799d 18h /amber/trunk
37 128-bit wide boot memory module csantifort 4800d 17h /amber/trunk
36 Changed boot_mem for the a25 system to be 128 bits wide to match the 128-bit wide wishbone bus csantifort 4800d 17h /amber/trunk
35 Amber25 improvements:
Use 128-bit wishbone bus, instead of 32-bit to reduce cache miss fetch times
Use a fast barrel shifter for shifts between 0 and 4 to improve timing
Use a 2 cycle full barrel shifter for complex shifts
csantifort 4802d 01h /amber/trunk
34 Tweaked strcpy function to speed it up slightly csantifort 4802d 22h /amber/trunk
33 Fixed bug in div assembly function. Handles negative numbers correctly.
Fixed bug in printf function, negative numbers now print correctly.
csantifort 4803d 18h /amber/trunk
32 Added clock cycle counting register to test_module to support dhrystone performance measurement csantifort 4804d 18h /amber/trunk
31 Added dhrystone benchmark test csantifort 4804d 18h /amber/trunk
30 Bug fix - a write access was sometimes dropped when it was in a sequence of writes with variable wb_ack delays csantifort 4818d 01h /amber/trunk
29 Use lgo command for saving waveforms in modelsim csantifort 4819d 18h /amber/trunk
28 Moved function prototypes to .h file csantifort 4819d 19h /amber/trunk
27 Got working with cadence nc simulator csantifort 4853d 02h /amber/trunk
26 Added wish list csantifort 4858d 02h /amber/trunk
25 Bug fix: boot-loader.mem became larger that the allowed 8k byte boot mem size.
Removed a struct in elfsplitter.c thats only used for debug - this reduced boot-loader.mem enough so that it fits again.
Tidy up: Removed a debug message from hw/tools/run.sh
csantifort 4859d 23h /amber/trunk
24 Added instructions how to build Linux kernel from source files csantifort 4861d 23h /amber/trunk
23 Split the source files list into a Vertex-6 only list and a Spartan-6 only list.
That way users don;t need to delete files from the list manually if they only have
a setup for one of the FPGA types.
csantifort 4862d 00h /amber/trunk
22 Added files and instructions to enable the building of the vmlinux image from the kernel source files. csantifort 4866d 00h /amber/trunk
21 Fixed bug in the conditions to create the FPGA configuration log file. I added the creation of the log file in the last release, but the way it was implemented was causing the Makefile to always rebuild from the start. csantifort 4866d 00h /amber/trunk
20 Added feature to A25 core to directly use a read value from the write back stage
to reduce the stall to 1 cycle when there is a register conflict with the
following instruction. This increases performance by about 3%.
csantifort 4887d 00h /amber/trunk
19 Create a configuration log file as part of the synthesis flow. This file is a useful reference to
tell the different bitfiles apart.
csantifort 4887d 01h /amber/trunk
18 Added list of source files and diagram for Amber25 core. csantifort 4889d 23h /amber/trunk
17 amber25 core bug fix. The return address for irq interrupts was off by 4 bytes
when the interrupt occurred during a stm instruction with the following instruction
having some register conflicts. Added test irq_stm to catch the bug.
Cleaned up some header descriptions
csantifort 4890d 22h /amber/trunk
16 Deleted the old version of the 3-state amber core. Its replaced with amber23.
Added the 5-state Amber core.
csantifort 4893d 13h /amber/trunk
15 Copied amber to amber23, Many system changes to support new amber25 core. csantifort 4893d 13h /amber/trunk
14 Re-wrote the behavioral clock generation code to more accurately
calculate the sys_clk frequency. The previous version was not
producing the correct frequency at higher frequenies due to
rounding errors.
csantifort 4895d 01h /amber/trunk
13 Bug fix - added an extra state to the rx state machine to properly align
reading the uart input to the middle of each bit.
csantifort 4895d 01h /amber/trunk
12 Added INITIALIZE_TO_ZERO parameter to keep instantiation
idendical to generic sram models. The parameter is not used
in the Xilinx models (they always init to zero) but it used
in the generic models.
csantifort 4895d 01h /amber/trunk
11 Added vmlinux test. csantifort 4910d 01h /amber/trunk
10 Removed parameters for unused peruipheral modules csantifort 4911d 05h /amber/trunk
9 Change the format of mcr and mrc listings so they exactly match the dissasembly produced by the gnu tools.
Write ip instead of r12 in listings.
csantifort 4911d 05h /amber/trunk

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.