OpenCores
URL https://opencores.org/ocsvn/bustap-jtag/bustap-jtag/trunk

Subversion Repositories bustap-jtag

[/] [bustap-jtag] - Rev 25

Rev

Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
25 Added AXI Passthrough Monitor IP for Vivado IP Integrator.
Can be synthesized by Vivado, but cannot be detected in the Vivado GUI.
Tk GUI can run with ISE/PLanahead 14.3 or 14.7.		 ash_riple 3553d 21h /bustap-jtag
24 Added support for Qsys based avalon transaction monitoring. ash_riple 3573d 21h /bustap-jtag
23 Updated Altera Tcl script to 32bit address bus. ash_riple 3780d 20h /bustap-jtag
22 ash_riple 3781d 01h /bustap-jtag
21 ash_riple 3781d 02h /bustap-jtag
20 Added support for 32bit Address bus. ash_riple 3781d 02h /bustap-jtag
19 Minor changes. ash_riple 4194d 21h /bustap-jtag
18 Added support for Xilinx Chips.
Added support for AXI4-Lite bus. Can be used as an XPS IP.		 ash_riple 4194d 22h /bustap-jtag
17 Added unreachable trigger condition "@WR & @RD" checking. ash_riple 4441d 00h /bustap-jtag
16 Released version 2.2. ash_riple 4463d 01h /bustap-jtag
15 Released version 2.2. ash_riple 4463d 01h /bustap-jtag
14 Changed dec to hex value of triggerPnum. ash_riple 4463d 16h /bustap-jtag
13 Added minor syntax changes and Linux environment simulation script. ash_riple 4463d 21h /bustap-jtag
12 Added timing information to the capture content. ash_riple 4464d 05h /bustap-jtag
11 Added pre-trigger capture. ash_riple 4464d 20h /bustap-jtag
10 Changed the location/reference/generation of compiler directive file: jtag_sim_define.h, to have better code structure. ash_riple 4470d 01h /bustap-jtag
9 Added testbench with interactive GUI. Start it from "sim.bat" or "do sim.do".
Virtual JTAG stimulus can only be entered statically before simulation starts.
FIFO operation can be simulated dynamically while simulation is run.		 ash_riple 4470d 20h /bustap-jtag
8 Added fault handling of wrong input length in the GUI. ash_riple 4474d 20h /bustap-jtag
7 Added references related to "Bus Monitor". ash_riple 4475d 00h /bustap-jtag
6 Updated to 2.1. New features added as in doc/Revision History.txt. ash_riple 4475d 20h /bustap-jtag
5 Created code base for 2.x development.
Now supporting pipelined read/write access. Provided wrapper can be used as an example to connect up_monitor to any bus.		 ash_riple 4478d 21h /bustap-jtag
4 Created tag for original source code. Version 1.0. ash_riple 4479d 00h /bustap-jtag
3 Added original article. ash_riple 4479d 00h /bustap-jtag
2 Checked in working code base. ash_riple 4482d 20h /bustap-jtag
1 The project and the structure was created root 4483d 10h /bustap-jtag

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.