Rev |
Log message |
Author |
Age |
Path |
113 |
minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error
spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated
prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files |
rfajardo |
4714d 04h |
/minsoc/tags/release-1.0 |
112 |
Updating installation & configuration scripts. |
rfajardo |
4714d 19h |
/minsoc/tags/release-1.0 |
111 |
minsoc-install.sh: DIR_TO_INSTALL is required before using beautify.sh |
rfajardo |
4714d 20h |
/minsoc/tags/release-1.0 |
110 |
Fixing several minor issues with the system:
-minsoc-install splitted into installation and configuration
-minsoc-configure.sh can be used to configure a fresh checked out system
-configure script used by both minsoc-configure.sh and minsoc-install.sh to configure
-rtl/verilog: svn externals fixed
-or1200 rolled back to release-1.0
-prj/scripts:
-Makefile has been used by simulation to differentiate project definition of vhdl and verilog files
-Altera was differentiating it in script
-now there are two scripts, one for vhdl and another for verilog. The differentiation occurs in Makefile as for simulation.
-altera_3c25_board/configure scripts had to be updated, vprj and vhdprj file extensions used to differentiate Verilog and VHDL project files.
-prj/src: or1200_top.prj downdated to definition of or1200_v1 |
rfajardo |
4714d 20h |
/minsoc/tags/release-1.0 |
109 |
Creating a branche for release candidate 1.0. |
rfajardo |
4714d 22h |
/minsoc/tags/release-1.0 |
108 |
Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.
Icarus Verilog and Altera synthesis are working as well. Job done! |
rfajardo |
4715d 01h |
/minsoc/tags/release-1.0 |
107 |
Adding setup batch script for Altera synthesis on Windows.
prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.
Maybe the other scripts have to be updated too. This will be checked soon. |
rfajardo |
4715d 04h |
/minsoc/tags/release-1.0 |
106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4715d 07h |
/minsoc/tags/release-1.0 |
105 |
Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. |
rfajardo |
4715d 09h |
/minsoc/tags/release-1.0 |
104 |
Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools) |
rfajardo |
4722d 07h |
/minsoc/tags/release-1.0 |
103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4724d 22h |
/minsoc/tags/release-1.0 |
102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4724d 22h |
/minsoc/tags/release-1.0 |
101 |
Documentation, wiki's address updated. |
rfajardo |
4750d 10h |
/minsoc/tags/release-1.0 |
100 |
syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. |
rfajardo |
4759d 08h |
/minsoc/tags/release-1.0 |
99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4759d 08h |
/minsoc/tags/release-1.0 |
98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4759d 09h |
/minsoc/tags/release-1.0 |
97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4759d 09h |
/minsoc/tags/release-1.0 |
96 |
Some files needed for Altera synthesis |
javieralso |
4759d 20h |
/minsoc/tags/release-1.0 |
95 |
Makefile for Altera FPGAs fixed |
javieralso |
4760d 23h |
/minsoc/tags/release-1.0 |
94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4763d 07h |
/minsoc/tags/release-1.0 |
93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4763d 10h |
/minsoc/tags/release-1.0 |
92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4764d 08h |
/minsoc/tags/release-1.0 |
91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4764d 09h |
/minsoc/tags/release-1.0 |
90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4765d 00h |
/minsoc/tags/release-1.0 |
89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4765d 01h |
/minsoc/tags/release-1.0 |
88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4765d 01h |
/minsoc/tags/release-1.0 |
87 |
Synchronizing scripts to behave exactly the same. |
rfajardo |
4765d 02h |
/minsoc/tags/release-1.0 |
86 |
Updating configure script messages. |
rfajardo |
4765d 02h |
/minsoc/tags/release-1.0 |
85 |
Central project definition under prj. Synthesis and simulation take their project files from here. |
rfajardo |
4765d 02h |
/minsoc/tags/release-1.0 |
84 |
syn/blackboxes/eth_top.v:
-module is now called ethmac instead of eth_top
-eth_defines.v is now called ethmac_defines.v |
rfajardo |
4766d 03h |
/minsoc/tags/release-1.0 |