| Rev |
Log message |
Author |
Age |
Path |
| 255 |
Modified code to make ModelSim happy (It didn't like the generate blocks for some reason). Also added a block describing the new generic. |
jshamlet |
1481d 01h |
/open8_urisc/trunk |
| 254 |
Simplified the ISR address logic so that the upper 12 bits are constant (set by generic) and only the lower 4 bits are registered/computed. |
jshamlet |
1481d 16h |
/open8_urisc/trunk |
| 253 |
Fixed spelling error in comment |
jshamlet |
1481d 16h |
/open8_urisc/trunk |
| 252 |
(This time the CPU model was included...)
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1481d 16h |
/open8_urisc/trunk |
| 251 |
Added RAM write fault detection, which can be used to indicate a memory write violation by the CPU. This allows a clean shutdown in the event of a memory problem/program crash.
Fixed a bug in the status_led.vhd entity that kept the flashing light function from working. The new code uses a maximal length 24-bit LFSR to create long delays. This is more efficient than a binary counter, but results in non-exact frequencies as a function of SYSTEM_FREQUENCY / (2^24-1).
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1481d 16h |
/open8_urisc/trunk |
| 250 |
Removed monitor RAM from SDLC model, as it is now proven to work. |
jshamlet |
1486d 00h |
/open8_urisc/trunk |
| 249 |
Added a 32-bit wide register and split the status_led core from o8_status_led.vhd, allowing it to be used as a subcomponent elsewhere. |
jshamlet |
1497d 16h |
/open8_urisc/trunk |
| 248 |
Removed Default_Int_Flag generic from CPU, as it is duplicated by Supervisor_Mode. |
jshamlet |
1498d 00h |
/open8_urisc/trunk |
| 247 |
Fixed problem where parallel interface was always forcing the data registers due to bad alias. |
jshamlet |
1498d 17h |
/open8_urisc/trunk |
| 246 |
The system timer module now allows for an optional millisecond resolution (settable through a generic). This prescalar enable permits the timer to operate from 1 to 256 mS, which is useful for a variety of tasks, such as serial timeouts and watchdog timers. The enable is not software settable, as this would complicate the register interface and isn't generally useful in an HDL based SOC design.
The vector interface now has a parallel interface that runs beside the serial interface, and is useful for connecting to DIO cards or other parallel interfaces. |
jshamlet |
1498d 22h |
/open8_urisc/trunk |
| 245 |
Modified the CPU's Supervisor_Mode to also protect SMSK and RSP instructions,
Added an external interrupt manager, o8_int_mgr.vhd. |
jshamlet |
1500d 21h |
/open8_urisc/trunk |
| 244 |
Added two new generics to the CPU model. The first is a supervisory mode that disables the STP PSR_I instruction. This prevents errant code execution from setting the I bit, and disabling any subsequent memory protection logic. The second allows the default state of the I bit to be set at startup. If set true, initialization code will run with the I bit set, allowing it to bypass memory protection.
Also modified the RAM models to include write mask logic, where the mask register is write-protected by the I bit in the CPU. When enabled, the models will prevent code from writing to memory regions which do not have their mask bits set. The upshot is that code can effectively "write protect" the RAM - which is useful for multitasking applications.
Also, most modules have been updated with write qualification inputs, allowing a similar scheme to be used for I/O, though not as elegantly. I use a register module, whose own write qual line is attached to the external copy of the I bit as an I/O write protect register.
Lastly, added a new externally triggered timer, which can generate pulses with programmable delays and widths, and which can interrupt on either the input trigger, the output rising edge, or output falling edge. The time base can be either the internal microsecond tick signal, or an external clock. |
jshamlet |
1501d 18h |
/open8_urisc/trunk |
| 243 |
Optimized code to prefer RAM vs register. |
jshamlet |
1508d 21h |
/open8_urisc/trunk |
| 242 |
Added write protect logic to the RAM cores and system timer as part of scheme to keep tasks from messing up the scheduler or other task's memory. The RAM is now divided into regions with a separate write mask register. The write mask register itself is only writeable with the I bit is set (during an interrupt or by setting it using STP PSR_I). The 1K memory is divided into 16, 64 byte regions while the 4K memory is divided into 32, 128 byte regions. The system timer simply checks for the I bit being set when the write protect generic is set.
Note that setting the write_protect generic false, or leaving it unset, will keep the previous behavior. |
jshamlet |
1508d 22h |
/open8_urisc/trunk |
| 241 |
Added an Open8 compatible 7-segment display/decoder and uploaded local/private documentation. |
jshamlet |
1513d 17h |
/open8_urisc/trunk |
| 240 |
Simplified the vector tx/rx system to a single line. An idle detector replaces the attn_req signal. |
jshamlet |
1515d 20h |
/open8_urisc/trunk |
| 239 |
More cleanup and notation of board to board I/O |
jshamlet |
1516d 01h |
/open8_urisc/trunk |
| 238 |
Removed extraneous reference to Ints.VEC_Flag from task.s, since it is supposed to be in the init function in test_fn.s. |
jshamlet |
1516d 21h |
/open8_urisc/trunk |
| 237 |
Found some errors in the comments and cleaned up unnecessary library references. |
jshamlet |
1516d 23h |
/open8_urisc/trunk |
| 236 |
More software cleanup for the Open8_II project |
jshamlet |
1517d 00h |
/open8_urisc/trunk |
| 235 |
Ok, this time with feeling. |
jshamlet |
1521d 18h |
/open8_urisc/trunk |
| 234 |
Forgot to add documentation |
jshamlet |
1521d 21h |
/open8_urisc/trunk |
| 233 |
Updated the Sample Projects.zip |
jshamlet |
1521d 21h |
/open8_urisc/trunk |
| 232 |
More code cleanup on sample projects. SDLC2LCD should now match the Open8_II project model. |
jshamlet |
1531d 00h |
/open8_urisc/trunk |
| 231 |
Updated sample projects and added elapsed time capture (chronometer) module |
jshamlet |
1531d 01h |
/open8_urisc/trunk |
| 230 |
Added two sample projects that show how to connect and program an Open8 system |
jshamlet |
1534d 11h |
/open8_urisc/trunk |
| 229 |
Created a new version of the system timer with 24-bit, 1-uS resolution. The new timer has a much different register interface, so it is now o8_sys_timer_ii. |
jshamlet |
1534d 22h |
/open8_urisc/trunk |
| 228 |
Added an initialization constant for the OPEN8_BUS_TYPE record. |
jshamlet |
1535d 12h |
/open8_urisc/trunk |
| 227 |
Added a demonstration Open8_cfg.vhd file, which is used to configure the system constants. It also provides a function that makes it easy to merge read buses. |
jshamlet |
1535d 19h |
/open8_urisc/trunk |
| 226 |
Forgot the updated package file... |
jshamlet |
1535d 23h |
/open8_urisc/trunk |
