| Rev |
Log message |
Author |
Age |
Path |
| 282 |
Modified the SDLC core transmit states to have consistent naming. |
jshamlet |
1307d 17h |
/open8_urisc/trunk/VHDL |
| 281 |
Added pre-initialization to the dual-port RAM signals. |
jshamlet |
1307d 20h |
/open8_urisc/trunk/VHDL |
| 280 |
Got rid of silly aliases that connected the dual-port memory and the arbitration logic. |
jshamlet |
1307d 20h |
/open8_urisc/trunk/VHDL |
| 279 |
More comment cleanup |
jshamlet |
1308d 17h |
/open8_urisc/trunk/VHDL |
| 278 |
Flattened the SDLC interface to fewer files and eliminated the package file. |
jshamlet |
1309d 11h |
/open8_urisc/trunk/VHDL |
| 276 |
More comment fixes |
jshamlet |
1344d 14h |
/open8_urisc/trunk/VHDL |
| 275 |
Fixed a minor comment error. |
jshamlet |
1346d 08h |
/open8_urisc/trunk/VHDL |
| 274 |
Updated comments with more corrections |
jshamlet |
1346d 15h |
/open8_urisc/trunk/VHDL |
| 273 |
Updated comments with corrections |
jshamlet |
1346d 16h |
/open8_urisc/trunk/VHDL |
| 271 |
Removed deleted generic define. |
jshamlet |
1356d 16h |
/open8_urisc/trunk/VHDL |
| 270 |
Moved CPU internal constants to o8_cpu.vhd and replace the generic that set the RSP direction flag with a constant instead. This removes the need to expose internal architectural flags externally.
Also added a hard-coded version register that takes a major and minor value as bytes using generics. This is a read-only register to the CPU. |
jshamlet |
1356d 16h |
/open8_urisc/trunk/VHDL |
| 269 |
Modified the write data path to use separate enumerated states rather than reuse the .reg field to improve performance. |
jshamlet |
1359d 06h |
/open8_urisc/trunk/VHDL |
| 268 |
Added a 16-input external interrupt manager and dedicated SPI tx-only transmitter (for use with DACs, etc.). Also updated the soft-DACs with cleaned up HDL. |
jshamlet |
1359d 06h |
/open8_urisc/trunk/VHDL |
| 267 |
Corrected the file description to indicate this is an example package. |
jshamlet |
1359d 06h |
/open8_urisc/trunk/VHDL |
| 266 |
Accidentally uploaded incorrect example file for Open8_cfg.vhd |
jshamlet |
1359d 06h |
/open8_urisc/trunk/VHDL |
| 265 |
Fixed a bug where "reg" wasn't being initialized with Poly_Init at reset. |
jshamlet |
1451d 15h |
/open8_urisc/trunk/VHDL |
| 264 |
Updated comments |
jshamlet |
1461d 12h |
/open8_urisc/trunk/VHDL |
| 263 |
Fixed a very old bug in the CPU core where autoincrements weren't affecting the upper register in the pair, causing it to loop around the lower 256 bytes. This only affected LDX/LDO, as the proper ALU signals were being generated in STO/STX and UPP. Wow, that bug has been in there for AGES.
Also separated the SDLC TX and RX interrupts so that they could be handled separately. |
jshamlet |
1461d 12h |
/open8_urisc/trunk/VHDL |
| 262 |
Added comments to LCD controllers - specifically that reading either register 0 or 1 will return the ready status. This code was already present, but not mentioned in the register map. |
jshamlet |
1470d 16h |
/open8_urisc/trunk/VHDL |
| 261 |
Increased delay timer to 7 bits for button press detection. |
jshamlet |
1477d 16h |
/open8_urisc/trunk/VHDL |
| 260 |
Added missing comments for Sequential_Interrupts generic, as well as comments explaining portions of the CPU operations. |
jshamlet |
1490d 15h |
/open8_urisc/trunk/VHDL |
| 259 |
Fixed issue where Write_Fault wasn't defaulting to '0' when Write_Protect was set to FALSE,
Added a pulse interval measurement entity,
Fixed comments. |
jshamlet |
1490d 17h |
/open8_urisc/trunk/VHDL |
| 258 |
Fixed write bug in o8_ltc2355_2p.vhd, added a newer Open8_cfg.vhd, and the sys_tick.vhd utility entity. |
jshamlet |
1491d 14h |
/open8_urisc/trunk/VHDL |
| 257 |
Fixed misnamed signal in o8_7seg.vhd and added a replacement switch interface that handles both static and pushbutton switches. |
jshamlet |
1491d 15h |
/open8_urisc/trunk/VHDL |
| 256 |
Removed unused generic from the status_led.vhd and cleaned up comments on the CPU |
jshamlet |
1491d 16h |
/open8_urisc/trunk/VHDL |
| 255 |
Modified code to make ModelSim happy (It didn't like the generate blocks for some reason). Also added a block describing the new generic. |
jshamlet |
1491d 20h |
/open8_urisc/trunk/VHDL |
| 254 |
Simplified the ISR address logic so that the upper 12 bits are constant (set by generic) and only the lower 4 bits are registered/computed. |
jshamlet |
1492d 11h |
/open8_urisc/trunk/VHDL |
| 253 |
Fixed spelling error in comment |
jshamlet |
1492d 11h |
/open8_urisc/trunk/VHDL |
| 252 |
(This time the CPU model was included...)
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1492d 12h |
/open8_urisc/trunk/VHDL |
| 251 |
Added RAM write fault detection, which can be used to indicate a memory write violation by the CPU. This allows a clean shutdown in the event of a memory problem/program crash.
Fixed a bug in the status_led.vhd entity that kept the flashing light function from working. The new code uses a maximal length 24-bit LFSR to create long delays. This is more efficient than a binary counter, but results in non-exact frequencies as a function of SYSTEM_FREQUENCY / (2^24-1).
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1492d 12h |
/open8_urisc/trunk/VHDL |
