| Rev |
Log message |
Author |
Age |
Path |
| 205 |
Thanks again to Johan W. good feedback, the following updates are implemented:
- Change code to fix delta cycle issues on some simulators in mixed VHDL/Verilog environment.
- Update oscillators enable generation to relax a critical timing paths in the ASIC version.
- Add option to scan fix inverted clocks in the ASIC version (disabled by default as this is supported by most tools). |
olivier.girard |
3268d 16h |
/openmsp430/trunk/core/bench |
| 202 |
Add DMA interface support + LINT cleanup |
olivier.girard |
3282d 15h |
/openmsp430/trunk/core/bench |
| 200 |
Major verificaiton and benchmark update to support both MSPGCC and RedHat/TI GCC toolchains. |
olivier.girard |
3443d 15h |
/openmsp430/trunk/core/bench |
| 192 |
Number of supported IRQs is now configurable to 14 (default), 30 or 62. |
olivier.girard |
3843d 16h |
/openmsp430/trunk/core/bench |
| 154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4271d 16h |
/openmsp430/trunk/core/bench |
| 151 |
Add possibility to configure custom Program, Data and Peripheral memory sizes. |
olivier.girard |
4356d 14h |
/openmsp430/trunk/core/bench |
| 145 |
Add Dhrystone and CoreMark benchmarks to the simulation environment. |
olivier.girard |
4409d 16h |
/openmsp430/trunk/core/bench |
| 134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4478d 16h |
/openmsp430/trunk/core/bench |
| 111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4785d 16h |
/openmsp430/trunk/core/bench |
| 106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4841d 15h |
/openmsp430/trunk/core/bench |
| 103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
4861d 22h |
/openmsp430/trunk/core/bench |
| 99 |
Small fix for CVER simulator support. |
olivier.girard |
4866d 16h |
/openmsp430/trunk/core/bench |
| 98 |
Added support for VCS verilog simulator.
VPD and TRN waveforms can now be generated. |
olivier.girard |
4866d 16h |
/openmsp430/trunk/core/bench |
| 94 |
Thanks to Mihai-Costin Manolescu's contribution, the simulation scripts now support the following simulators:
- Icarus Verilog
- Cver
- Verilog-XL
- NCVerilog
- Modelsim |
olivier.girard |
4870d 16h |
/openmsp430/trunk/core/bench |
| 84 |
Update SRAM model in the core testbench to prevent the IEEE warning when running simulations.
Update watchdog to fix NMI synchronisation problem.
Add synchronizers for the PUC signal in the debug interface. |
olivier.girard |
4902d 17h |
/openmsp430/trunk/core/bench |
| 76 |
Add possibility to simulate C code within the "core" environment. |
olivier.girard |
4968d 16h |
/openmsp430/trunk/core/bench |
| 72 |
Expand configurability options of the program and data memory sizes. |
olivier.girard |
5077d 18h |
/openmsp430/trunk/core/bench |
| 67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5225d 01h |
/openmsp430/trunk/core/bench |
| 65 |
Add possibility to disable waveform dumping by setting the OMSP_NODUMP environment variable to 1. |
olivier.girard |
5235d 15h |
/openmsp430/trunk/core/bench |
| 54 |
Update FPGA projects with the combinatorial loop fixed. |
olivier.girard |
5263d 18h |
/openmsp430/trunk/core/bench |
| 34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5292d 18h |
/openmsp430/trunk/core/bench |
| 33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5292d 18h |
/openmsp430/trunk/core/bench |
| 23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5413d 20h |
/openmsp430/trunk/core/bench |
| 17 |
Updated header with SVN info |
olivier.girard |
5439d 15h |
/openmsp430/trunk/core/bench |
| 2 |
Upload complete openMSP430 project to the SVN repository |
olivier.girard |
5474d 15h |
/openmsp430/trunk/core/bench |
