Rev |
Log message |
Author |
Age |
Path |
1390 |
* Change scheduler to count down to 0 instead of reaching a certain cycle
count.
* Change the SCHED_ADD interface to take a time out as the parameter instead of the number of cycles. |
nogj |
7057d 02h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1367 |
Cleanup uart peripheral useing the new callback mechanism |
nogj |
7097d 20h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1366 |
Pass a caller given pointer to the vapi_read callback |
nogj |
7097d 20h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1359 |
Pass private data in readfunc/writefunc callbacks |
nogj |
7097d 21h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1358 |
Modularise config file parseing. Paving the way for further modularisation. |
nogj |
7097d 21h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1350 |
Mark a simulated cpu address as such, by introducing the new oraddr_t type |
nogj |
7107d 00h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1308 |
Gyorgy Jeney: extensive cleanup |
phoenix |
7311d 18h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1244 |
Added "cm" command to copy data inside memory.
Make or1ksim work on little endian platforms.
Port to Mac OS X.
Some bugfixes.
Allow JTAG write access to read-only memory regions. |
hpanther |
7479d 03h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1165 |
timeout bug fixed; contribution by Carlos |
markom |
7718d 02h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1153 |
When multiple interrupts were pending, e.g. TX buffer empty and RX
available, reading the UART's IIR register could potentially clear a
TX interrupt before it had been sent to the processor, thus dropping
the interrupt permanently.
Fix tested w/ both eCos and uclinux. |
sfurman |
7775d 21h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1145 |
1) Fix trivial bug w/ transmitter empty interrupts that I introduced in the
last check-in.
2) Improve printed output from debugging-only uart_status() routine. |
sfurman |
7776d 15h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1143 |
Make UART transmitter-empty interrupts match both 16450 and 16550 behavior. |
sfurman |
7779d 11h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1116 |
There was a bug in the simulator's UART implementation that caused the
UART's LSR register to become corrupted. This was due to an
assumption that 'char' is an unsigned type, but that is not true on
all platforms.
When the char type is signed and a character is read in the range
0x80-0xff, the high bit is sign-extended into the upper bits of an
entry in the receive FIFO. When the character reaches the head of the
FIFO, the upper bits of the FIFO entry are OR'ed into the LSR, causing
the LSR to be set to 0xFF.
A simple cast fixes the problem. |
sfurman |
7819d 19h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
1073 |
channels support |
rprescott |
7944d 23h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
997 |
PRINTF should be used instead of printf; command redirection repaired |
markom |
8008d 09h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
970 |
Testbench is now running on ORP architecture platform. |
simons |
8015d 20h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
884 |
code cleaning - a lot of global variables moved to runtime struct |
markom |
8052d 07h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
821 |
ugly bug with duplicate redefined i removed |
markom |
8138d 04h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
806 |
uart now partially uses scheduler |
markom |
8143d 10h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
805 |
kbd, fb, vga devices now uses scheduler |
markom |
8143d 10h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
713 |
lot of small minor improvements: code documented, cleaned; runs at about same speed when not actually logging, but exe_log is enabled; raw_stats now run only with simple execution - enable RAW_USAGE_STATS macro |
markom |
8180d 08h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
549 |
enabled parameters removed from devices, which also have number of devices; command line --output-cfg parameter added |
markom |
8234d 04h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
530 |
THRI interrupt fixed. |
simons |
8236d 21h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
529 |
Bug in receiver fixed. |
simons |
8237d 00h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
492 |
uart THRE interrupt immedialty after write to IER |
markom |
8253d 07h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
490 |
clkcycle parsing problem fixed |
markom |
8254d 03h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
424 |
memory configuration file joined into .cfg file; *mem.cfg are obsolete; read-only and write-only memory is supported; memory logging is not yet supported; update of testbench - only cache test fails, since it writes to RO memory |
markom |
8263d 07h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
423 |
changed break behaviour and interrupt pending; interrupt line chabnged to 15; sync bug in mode switch |
markom |
8264d 02h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
411 |
acv uart testsuite now works (without modem test) |
markom |
8267d 08h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |
409 |
some minor changes to or1ksim; Testbench except.s modified. Interrupt test almost finished for uart ACV. |
markom |
8268d 08h |
/or1k/tags/nog_patch_66/or1ksim/peripheral/16450.c |