| Rev |
Log message |
Author |
Age |
Path |
| 1765 |
|
root |
5618d 08h |
/or1k/trunk/gdb-5.0/gdb/config |
| 1152 |
*** empty log message *** |
phoenix |
7777d 14h |
/or1k/trunk/gdb-5.0/gdb/config |
| 1149 |
*** empty log message *** |
phoenix |
7778d 04h |
/or1k/trunk/gdb-5.0/gdb/config |
| 1142 |
Speed up gdb when running with serial targets:
When generating backtraces, the prologue of each function is scanned
at least three times by architecture-independent code, e.g. to
determine offsets of saved registers, identify frameless functions,
etc. This new code adds straightforward caching of the information
gleaned by or1k_scan_prologue() on a per-frame basis rather than
storing it in global static variables. (This benefits both JTAG and
serial gdb targets, though the JTAG target runs fast enough that it is
not particularly needed.)
When the register set is dumped by the serial target, e.g. at any
breakpoint or interrupt, the 32 vector/FP registers were included in
the dump (each 8 bytes long), though they aren't implemented. The new
code tells gdb that unimplemented registers have zero length in the
dump. |
sfurman |
7781d 01h |
/or1k/trunk/gdb-5.0/gdb/config |
| 593 |
ctrl-c handling fixed |
markom |
8226d 18h |
/or1k/trunk/gdb-5.0/gdb/config |
| 403 |
Prompt changed because ddd requires (gdb). |
simons |
8271d 21h |
/or1k/trunk/gdb-5.0/gdb/config |
| 372 |
steps toward joining or32.c and opcode/or32.h of or1ksim and gdb; added opcodes/or32.c; more detailed gdb l.trap handling |
markom |
8279d 21h |
/or1k/trunk/gdb-5.0/gdb/config |
| 364 |
info spr bug fixed |
markom |
8284d 16h |
/or1k/trunk/gdb-5.0/gdb/config |
| 363 |
program can be stepped and continued before running it, supporting low level debugging |
markom |
8284d 17h |
/or1k/trunk/gdb-5.0/gdb/config |
| 362 |
some changes based on current modifications to or1k; cleaner register naming; ctrl-c causes stepi; write&read pc work on next instruction |
markom |
8284d 22h |
/or1k/trunk/gdb-5.0/gdb/config |
| 207 |
Several major changes to allow gdb to work with an Or1k implementation
that does not need a writeable PC. This version will use the breakpoint
vector and install a new vector into the EPC register, and then single
step out of the breakpoint exception. The breakpoint exception vector
must include only 2 commands: l.rfe and l.nop. Anything else and this
gdb version will fail w/ or1ksim. |
chris |
8339d 23h |
/or1k/trunk/gdb-5.0/gdb/config |
| 146 |
Mofications to work with or1ksim JTAG based simulation |
chris |
8433d 19h |
/or1k/trunk/gdb-5.0/gdb/config |
| 136 |
Fixed the DSR/DRR debug register definitions which were stored backwards |
chris |
8437d 21h |
/or1k/trunk/gdb-5.0/gdb/config |
| 126 |
Added JTAG proxy protocol definitions |
chris |
8440d 19h |
/or1k/trunk/gdb-5.0/gdb/config |
| 122 |
or1k target init call fixed.
long long type converted to LONGEST. |
markom |
8448d 00h |
/or1k/trunk/gdb-5.0/gdb/config |
| 119 |
Synchronized with or1k arch changes. |
markom |
8457d 18h |
/or1k/trunk/gdb-5.0/gdb/config |
| 118 |
Added heavy duty commands hwatch and htrace, to enable full HW debugging
support.
Repaired jtag_set_chain. |
markom |
8457d 18h |
/or1k/trunk/gdb-5.0/gdb/config |
| 116 |
small bug fixed |
markom |
8463d 18h |
/or1k/trunk/gdb-5.0/gdb/config |
| 115 |
sync to current or1k arch. |
markom |
8464d 19h |
/or1k/trunk/gdb-5.0/gdb/config |
| 113 |
Modified:
interface for or1k target - should be final
reset, stall, initialization functions
HW assisted watchpoints as far gdb supports them.
info matchpoints command added
draft hwatch command |
markom |
8465d 17h |
/or1k/trunk/gdb-5.0/gdb/config |
| 107 |
This commit was generated by cvs2svn to compensate for changes in r106,
which included commits to RCS files with non-trunk default branches. |
markom |
8471d 20h |
/or1k/trunk/gdb-5.0/gdb/config |
