| Rev |
Log message |
Author |
Age |
Path |
| 1765 |
|
root |
5580d 04h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 1333 |
gcc 3.4 compile fix |
phoenix |
7114d 12h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 1144 |
Speed up gdb when running with serial targets:
When generating backtraces, the prologue of each function is scanned
at least three times by architecture-independent code, e.g. to
determine offsets of saved registers, identify frameless functions,
etc. This new code adds straightforward caching of the information
gleaned by or1k_scan_prologue() on a per-frame basis rather than
storing it in global static variables. (This benefits both JTAG and
serial gdb targets, though the JTAG target runs fast enough that it is
not particularly needed.)
When the register set is dumped by the serial target, e.g. at any
breakpoint or interrupt, the 32 vector/FP registers were included in
the dump (each 8 bytes long), though they aren't implemented. The new
code tells gdb that unimplemented registers have zero length in the
dump. |
sfurman |
7742d 06h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 1123 |
Renumber/rename SPRs to match latest architecture doc |
sfurman |
7777d 05h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 1115 |
Fix stack-walking code in or1k_frame_chain() and or1k_skip_prologue()
to expect the function prologue that or32 gcc currently emits, rather
than a previous incarnation of the or1k ABI. |
sfurman |
7799d 03h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 874 |
Command for displaying trace buffer added. |
simons |
8031d 10h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 603 |
fixed bfd |
markom |
8185d 17h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 593 |
ctrl-c handling fixed |
markom |
8188d 14h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 577 |
info spr fixed |
markom |
8191d 12h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 404 |
is_delayed() is used outside this file. |
simons |
8233d 17h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 372 |
steps toward joining or32.c and opcode/or32.h of or1ksim and gdb; added opcodes/or32.c; more detailed gdb l.trap handling |
markom |
8241d 17h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 364 |
info spr bug fixed |
markom |
8246d 12h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 363 |
program can be stepped and continued before running it, supporting low level debugging |
markom |
8246d 13h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 362 |
some changes based on current modifications to or1k; cleaner register naming; ctrl-c causes stepi; write&read pc work on next instruction |
markom |
8246d 18h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 207 |
Several major changes to allow gdb to work with an Or1k implementation
that does not need a writeable PC. This version will use the breakpoint
vector and install a new vector into the EPC register, and then single
step out of the breakpoint exception. The breakpoint exception vector
must include only 2 commands: l.rfe and l.nop. Anything else and this
gdb version will fail w/ or1ksim. |
chris |
8301d 18h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 149 |
Fixed bug where disassemble command caused a segmentation fault |
chris |
8394d 22h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 120 |
Few typos in comments and text fixed. |
markom |
8413d 20h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 119 |
Synchronized with or1k arch changes. |
markom |
8419d 13h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 118 |
Added heavy duty commands hwatch and htrace, to enable full HW debugging
support.
Repaired jtag_set_chain. |
markom |
8419d 14h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 116 |
small bug fixed |
markom |
8425d 14h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 115 |
sync to current or1k arch. |
markom |
8426d 15h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 113 |
Modified:
interface for or1k target - should be final
reset, stall, initialization functions
HW assisted watchpoints as far gdb supports them.
info matchpoints command added
draft hwatch command |
markom |
8427d 13h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 105 |
This commit was generated by cvs2svn to compensate for changes in r104,
which included commits to RCS files with non-trunk default branches. |
markom |
8433d 16h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
| 104 |
First version. Still unstable.
Basic functionallity should work. Use only dummy target. |
markom |
8433d 16h |
/or1k/trunk/gdb-5.0/gdb/or1k-tdep.c |
