Rev |
Log message |
Author |
Age |
Path |
28 |
Fixed a small lint bug associated with the scope vs the compressed scope. |
dgisselq |
2952d 19h |
/s6soc/trunk |
27 |
Added a bootloader capability so that pieces of the program may be immediately
loaded into RAM. Further, the custom linker script, cmodram.ld, has been
added to dispatch object files to either FLASH or RAM. Finally, for those
items that were headed to RAM, their support files have been split between
RAM and FLASH code: kernel.c/ksetup.c, syspipe.c/pipesetup.c, etc. |
dgisselq |
2952d 20h |
/s6soc/trunk |
26 |
Modified to be able to handle different load from virtual addresses. This
enables the bootloader capability. |
dgisselq |
2952d 20h |
/s6soc/trunk |
25 |
Converted timer B to be a non-reloadable watchdog timer. |
dgisselq |
2952d 20h |
/s6soc/trunk |
24 |
Made the ziptimer autoreload feature a parameter (dis)abled option. |
dgisselq |
2952d 20h |
/s6soc/trunk |
23 |
Fixed a bug which caused every instruction to be loaded/prefetched twice. |
dgisselq |
2952d 20h |
/s6soc/trunk |
22 |
Initial version of the ZipOS operating system construct(s). |
dgisselq |
2956d 18h |
/s6soc/trunk |
21 |
Adds two device drivers: one for the SPI display, and another for the pseudo
device that simulates the Real-Time Clock. |
dgisselq |
2956d 19h |
/s6soc/trunk |
20 |
This linker description file acknowledges a .fixdata section which can be
used for debug data upon startup. This allows a startup function to write
all registers out, without destroying them or modifying them on the way. |
dgisselq |
2956d 19h |
/s6soc/trunk |
19 |
Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block. |
dgisselq |
2956d 19h |
/s6soc/trunk |
18 |
Added a picture of the device pinouts to the specification. |
dgisselq |
2956d 19h |
/s6soc/trunk |
17 |
Modifications necessary to find some bugs, and to load the flash with an ELF
file. |
dgisselq |
2956d 19h |
/s6soc/trunk |
16 |
Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well. |
dgisselq |
2956d 19h |
/s6soc/trunk |
15 |
Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board. |
dgisselq |
2962d 12h |
/s6soc/trunk |
14 |
Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.) |
dgisselq |
2962d 12h |
/s6soc/trunk |
13 |
Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release. |
dgisselq |
2962d 12h |
/s6soc/trunk |
12 |
The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs. |
dgisselq |
2963d 10h |
/s6soc/trunk |
11 |
Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work. |
dgisselq |
2964d 08h |
/s6soc/trunk |
10 |
Added the capability to run ELF files natively, fully processing the ELF format. |
dgisselq |
2964d 08h |
/s6soc/trunk |
9 |
Added pinout diagrams, based upon a (hopefully) final UCF file. |
dgisselq |
2964d 08h |
/s6soc/trunk |
8 |
First pseudo-running version. The alternate configuration (not the main one)
has been initially tested. wbregs works for reading/writing registers,
so it is now possible to test the peripherals. |
dgisselq |
2969d 09h |
/s6soc/trunk |
7 |
Created/added an initial specification. Updated/corrected several copywrite
notices. |
dgisselq |
2969d 23h |
/s6soc/trunk |
6 |
Initial UCF modifications. Pin layout still isn't complete, but I'm starting
to work it. |
dgisselq |
2990d 18h |
/s6soc/trunk |
5 |
These two are my first attempt(s) at a secondary project file, one that can
run as an alternate to the main file but that gives more access to the hardware,
such as programming access to the flash. |
dgisselq |
2990d 18h |
/s6soc/trunk |
4 |
Lots of updates, as part of actually making this work on hardware. Not there
yet, so this is still pre-alpha. |
dgisselq |
2990d 18h |
/s6soc/trunk |
3 |
Updated date. |
dgisselq |
2990d 18h |
/s6soc/trunk |
2 |
The initial check in--all the files that will make this SoC work. |
dgisselq |
3001d 13h |
/s6soc/trunk |
1 |
The project and the structure was created |
root |
3001d 15h |
/s6soc/trunk |