Rev |
Log message |
Author |
Age |
Path |
27 |
Added a few ALU opcodes and came across a weird propogation delay issue with my registerfile.
As a workaround, I'm trying to use falling_edge instead of rising_edge. We shall see if I regret this later |
earlz |
4500d 20h |
/tinycpu/trunk |
26 |
Added extra check to make sure fetcher works properly after memory write |
earlz |
4500d 21h |
/tinycpu/trunk |
25 |
Wait for memory state now works as expected, and opcode `mov [reg], immd` works now |
earlz |
4501d 02h |
/tinycpu/trunk |
24 |
Good news, mov to IP actually works as expected! |
earlz |
4501d 19h |
/tinycpu/trunk |
23 |
Added top module for testing how our memory and cpu will work together. (hint: success)
Messing around with a small timing issue in core |
earlz |
4501d 19h |
/tinycpu/trunk |
22 |
Added to process sensitivity list to avoid warning and added ELSE for IR so it doesn't generate a latch |
earlz |
4502d 11h |
/tinycpu/trunk |
21 |
The core_tb testbench finally passes. It probably doesn't synthesize, or even pass other testbenches, but it passes that one damn it. |
earlz |
4502d 11h |
/tinycpu/trunk |
20 |
fuck it. All sorts of broken, will try to fix it tomorrow |
earlz |
4503d 11h |
/tinycpu/trunk |
19 |
Got beginning of core/decoder for the CPU |
earlz |
4503d 13h |
/tinycpu/trunk |
18 |
Finished memory controller |
earlz |
4506d 22h |
/tinycpu/trunk |
17 |
Added fetch component for fetching from memory to instruction register
Added additional testing for carryover to make sure it's correct |
earlz |
4507d 12h |
/tinycpu/trunk |
16 |
Renamed incdec to carryover (see design for why).
carryover should be done, though may change the "straight through on disable" behavior to instead leaving it floating depending on how things go later with coding. |
earlz |
4510d 14h |
/tinycpu/trunk |
15 |
Added README, LICENSE, and the (so far not created) incdec component |
earlz |
4512d 12h |
/tinycpu/trunk |
14 |
Added ALU with all the operations we'll need. Synthesizes as well trivially |
earlz |
4512d 20h |
/tinycpu/trunk |
13 |
Forgot about the new library I added |
earlz |
4512d 22h |
/tinycpu/trunk |
12 |
registerfile has ports for every register now
makefile now uses GHW file format for gtkwave instead of VCD |
earlz |
4512d 23h |
/tinycpu/trunk |
11 |
Finally, it synthesizes to BRAM.. Possibly need to fix how the DataOut syncs with WriteEnable and Address though if I plan to both read and write on the same clock edge |
earlz |
4516d 13h |
/tinycpu/trunk |
10 |
Just committing so I can keep this original that passes simulation, but still synthesizes to LUTs |
earlz |
4516d 13h |
/tinycpu/trunk |
9 |
Trying to add a byte-enable to the RAM. Used Xilinx's template for it, but ghdl won't pass the testbench |
earlz |
4516d 21h |
/tinycpu/trunk |
8 |
Added blockram for inferring actual block RAM.
Now we need a memory controller, not a crappy memory emulation thing |
earlz |
4517d 20h |
/tinycpu/trunk |
7 |
Changed memory to fix bound check error
Decreased size of RAM since 4096 bytes of RAM would require an FPGA with more than 32K flip-flops (mine has ~4000) |
earlz |
4517d 21h |
/tinycpu/trunk |
6 |
Reworked memory code to hopefully synthesize better |
earlz |
4518d 02h |
/tinycpu/trunk |
5 |
Modified registerfile to be dual-port for both read and write |
earlz |
4518d 13h |
/tinycpu/trunk |
4 |
Added internal memory interface
Updated design |
earlz |
4518d 21h |
/tinycpu/trunk |
3 |
Updated registerfile to have 2 read ports
Added super rough design document mainly just for brainstorming |
earlz |
4519d 13h |
/tinycpu/trunk |
2 |
Initial commit |
earlz |
4519d 14h |
/tinycpu/trunk |
1 |
The project and the structure was created |
root |
4519d 17h |
/tinycpu/trunk |