Rev |
Log message |
Author |
Age |
Path |
98 |
Updated copyright notices for the new year, to reflect that changes have been
made in 2016. |
dgisselq |
2911d 13h |
/xulalx25soc/trunk |
97 |
Latest working bit file, with all changes attached as of this date. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
96 |
Now accepts an SD-Card backing file, so that SD-Card reads *and* writes can be
tested. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
95 |
Added write capability to the SD-SPI simulator. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
94 |
Fixes a bug which had caused the device to die artificially and early, just
simply because the program connecting to the simulator shut its pipe down before
getting our last message. We now ignore this signal and continue. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
93 |
Oops -- missed adjusting the copyright. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
92 |
Fixes the problem whereby the master counters show when the user counters should
be showing and vice versa. Now the master counters show by default, together
with their correct labels. User counters are still available by pressing
'u' in the debugger, and the master counter display may be returned to by
pressing 'm' in the debugger. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
91 |
Fixes bugs associated with an overflow of write acknowledgements in the
receiver. This helps keep our accesses aligned. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
90 |
Reads and writes to the SD over SPI port now work. The card appears, as of now,
to be fully functional. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
89 |
Bug fixes, following the adf_ce logic combining ALU/DIVIDE/FPU pipeline logic
into one register, this fixes that logic so that instructions without their
condition fulfilled are still "executed" and marked as done. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
88 |
Adjusted copyright date. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
87 |
Placed the interrupt into the carry chain for less logic area. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
86 |
Fine tuning the `defines, so that you can build pipelined without pipelined
bus access and so forth. |
dgisselq |
2934d 17h |
/xulalx25soc/trunk |
85 |
First version of the SD-SPI interface, with partial functionality. (No the
empty link that was here before.) |
dgisselq |
2938d 15h |
/xulalx25soc/trunk |
84 |
First part of switching to proper sdspi.v, and not just the link. |
dgisselq |
2938d 15h |
/xulalx25soc/trunk |
83 |
Fixes a bug in the LX9 build whereby the flash was never ever granted permission
to use the SPI port. |
dgisselq |
2939d 18h |
/xulalx25soc/trunk |
82 |
|
dgisselq |
2940d 13h |
/xulalx25soc/trunk |
81 |
Adds register values for the SD-Card registers. |
dgisselq |
2940d 13h |
/xulalx25soc/trunk |
80 |
Currently working version: contains both a working DMA controller as well as
a working (as far as I can tell) SD-Card controller (writes not yet tested). |
dgisselq |
2940d 13h |
/xulalx25soc/trunk |
79 |
Adds 'bench' and 'sw' targets, and automatically builds them (now). |
dgisselq |
2940d 13h |
/xulalx25soc/trunk |
78 |
Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result. |
dgisselq |
2940d 13h |
/xulalx25soc/trunk |
77 |
Adds register names and values for the SD card interface. |
dgisselq |
2940d 13h |
/xulalx25soc/trunk |
76 |
Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device. |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |
75 |
Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.) |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |
74 |
Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged. |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |
73 |
Simplified logic. |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |
72 |
Sets XULA25 as the default. |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |
71 |
Needed to play with subtle timing to get this to build. Expect me to play
with these two clock numbers more. |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |
70 |
Cosmetic (minor) update. |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |
69 |
Massive logic simplification. This is also the first (verified) working
version. |
dgisselq |
2940d 14h |
/xulalx25soc/trunk |