Rev |
Log message |
Author |
Age |
Path |
108 |
Minor documentation updates. |
dgisselq |
2952d 10h |
/xulalx25soc |
107 |
Minor change. |
dgisselq |
2952d 10h |
/xulalx25soc |
106 |
Minor, inconsequential changes. |
dgisselq |
2952d 10h |
/xulalx25soc |
105 |
Mostly cosmetic changes. The Makefile now builds a couple more programs,
the documentation is better, etc. |
dgisselq |
2952d 10h |
/xulalx25soc |
104 |
Updates to the flash driver drawn from the S6SoC project. |
dgisselq |
2952d 10h |
/xulalx25soc |
103 |
Added a SDSPI scope, and defined which of the four scopes it points to.
(It uses the configuration scopes position, if the configuration scope isn't
defined.) |
dgisselq |
2952d 10h |
/xulalx25soc |
102 |
Updated documentation. The documentation for these now also reflects that
these were drawn from an FPGA Library project, that is shared among many
FPGA builds. |
dgisselq |
2952d 10h |
/xulalx25soc |
101 |
Fixed the `defines at the top so that this can be built without any CPU.
This was then used to measure the impact of the CPU on the entire build, as
you could now build with no CPU, and then with a CPU to compare. |
dgisselq |
2952d 10h |
/xulalx25soc |
100 |
Includes updates so this can run at higher clocks speeds within an FPGA. |
dgisselq |
2952d 10h |
/xulalx25soc |
99 |
Includes high-speed updates. rxuart and txuart will now run at 200MHz on
an Artix-7, so should not impact timing (any more) on the XuLA platform. |
dgisselq |
2952d 10h |
/xulalx25soc |
98 |
Updated copyright notices for the new year, to reflect that changes have been
made in 2016. |
dgisselq |
2952d 10h |
/xulalx25soc |
97 |
Latest working bit file, with all changes attached as of this date. |
dgisselq |
2975d 14h |
/xulalx25soc |
96 |
Now accepts an SD-Card backing file, so that SD-Card reads *and* writes can be
tested. |
dgisselq |
2975d 14h |
/xulalx25soc |
95 |
Added write capability to the SD-SPI simulator. |
dgisselq |
2975d 14h |
/xulalx25soc |
94 |
Fixes a bug which had caused the device to die artificially and early, just
simply because the program connecting to the simulator shut its pipe down before
getting our last message. We now ignore this signal and continue. |
dgisselq |
2975d 14h |
/xulalx25soc |
93 |
Oops -- missed adjusting the copyright. |
dgisselq |
2975d 14h |
/xulalx25soc |
92 |
Fixes the problem whereby the master counters show when the user counters should
be showing and vice versa. Now the master counters show by default, together
with their correct labels. User counters are still available by pressing
'u' in the debugger, and the master counter display may be returned to by
pressing 'm' in the debugger. |
dgisselq |
2975d 14h |
/xulalx25soc |
91 |
Fixes bugs associated with an overflow of write acknowledgements in the
receiver. This helps keep our accesses aligned. |
dgisselq |
2975d 14h |
/xulalx25soc |
90 |
Reads and writes to the SD over SPI port now work. The card appears, as of now,
to be fully functional. |
dgisselq |
2975d 14h |
/xulalx25soc |
89 |
Bug fixes, following the adf_ce logic combining ALU/DIVIDE/FPU pipeline logic
into one register, this fixes that logic so that instructions without their
condition fulfilled are still "executed" and marked as done. |
dgisselq |
2975d 14h |
/xulalx25soc |
88 |
Adjusted copyright date. |
dgisselq |
2975d 14h |
/xulalx25soc |
87 |
Placed the interrupt into the carry chain for less logic area. |
dgisselq |
2975d 14h |
/xulalx25soc |
86 |
Fine tuning the `defines, so that you can build pipelined without pipelined
bus access and so forth. |
dgisselq |
2975d 14h |
/xulalx25soc |
85 |
First version of the SD-SPI interface, with partial functionality. (No the
empty link that was here before.) |
dgisselq |
2979d 11h |
/xulalx25soc |
84 |
First part of switching to proper sdspi.v, and not just the link. |
dgisselq |
2979d 11h |
/xulalx25soc |
83 |
Fixes a bug in the LX9 build whereby the flash was never ever granted permission
to use the SPI port. |
dgisselq |
2980d 15h |
/xulalx25soc |
82 |
|
dgisselq |
2981d 10h |
/xulalx25soc |
81 |
Adds register values for the SD-Card registers. |
dgisselq |
2981d 10h |
/xulalx25soc |
80 |
Currently working version: contains both a working DMA controller as well as
a working (as far as I can tell) SD-Card controller (writes not yet tested). |
dgisselq |
2981d 10h |
/xulalx25soc |
79 |
Adds 'bench' and 'sw' targets, and automatically builds them (now). |
dgisselq |
2981d 10h |
/xulalx25soc |