OpenCores
URL https://opencores.org/ocsvn/uart_block/uart_block/trunk

Subversion Repositories uart_block

[/] - Rev 36

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
36 Working on the documentation leonardoaraujo.santos 4426d 06h /
35 Bug really fixed... Some testbench results saved... Now would be a nice Idea to start thinking about documentation... leonardoaraujo.santos 4429d 07h /
34 Seems that the issue is solved (working on Spartan3E board and confirmed with chipscope) leonardoaraujo.santos 4429d 10h /
33 Adding some images leonardoaraujo.santos 4430d 12h /
32 Change baud generator to create a overclock frequency of 8x the baud rate....
Change the serial receiver to sample the signal on the middle of the serial input, now it's using only the overclocked baud...
leonardoaraujo.santos 4430d 15h /
31 Working on documentation and on Chipscope leonardoaraujo.santos 4431d 03h /
30 Preparing to work with chipscope leonardoaraujo.santos 4431d 03h /
29 Preparing to work with chipscope leonardoaraujo.santos 4431d 04h /
28 Changing wrong datasheet of Spartan3A kit for newer one.... Detected some bug on the reception (When is fast it seems that the reception could be wrong...) leonardoaraujo.santos 4431d 05h /
27 First version seems working nice on the PC!!! leonardoaraujo.santos 4431d 05h /
26 Adding Spartan3A Starter kit leonardoaraujo.santos 4431d 12h /
25 Adding some sample code on the doc folder, also adding the wishbone public domain library file leonardoaraujo.santos 4431d 13h /
24 Working on testbench and refactoring... now we could start some tests on the board... leonardoaraujo.santos 4432d 10h /
23 Working on uart_control refactoring leonardoaraujo.santos 4432d 11h /
22 Refactoring the uart_control leonardoaraujo.santos 4432d 14h /
21 Preparing to rewrite uart_control, adding pin to indicate data available at the RX leonardoaraujo.santos 4432d 21h /
20 Finishing at least the tests on testbench.... Was good to verify that the uart_control should be redesigned to allow concurrent receive and to clean the code... leonardoaraujo.santos 4433d 05h /
19 Working on the top wishbone slave testbench.... still need some fixes (Both on the testbench and on the uart_control.vhd) leonardoaraujo.santos 4433d 05h /
18 sdsd leonardoaraujo.santos 4433d 12h /
17 Working on slave testbench and fixing some bugs leonardoaraujo.santos 4433d 13h /
16 Adding testbench for wishbone slave module leonardoaraujo.santos 4433d 14h /
15 Taking out some warnings and transparent latches from the design leonardoaraujo.santos 4433d 15h /
14 Fixing some warnings... Adding wishbone slave leonardoaraujo.santos 4434d 10h /
13 Working on uart_control testbench... also applying some fixes... leonardoaraujo.santos 4434d 11h /
12 Working on the communication blocks leonardoaraujo.santos 4434d 12h /
11 Adding uart_communication_block leonardoaraujo.santos 4434d 15h /
10 Working on the control unit part leonardoaraujo.santos 4434d 19h /
9 Adding Control unit for uart block leonardoaraujo.santos 4435d 06h /
8 Solving some bugs in baud_generator.vhd leonardoaraujo.santos 4435d 17h /
7 Remember to clean project files leonardoaraujo.santos 4436d 14h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.