OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] - Rev 31

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
31 Newest available schematic nuubik 6065d 14h /
30 Fixed some typos in document nuubik 6065d 14h /
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 6065d 14h /
28 Quartus project files for HW code 5 project files nuubik 6066d 15h /
27 Initial commit of post code logger block and fifo used in the logger nuubik 6066d 15h /
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 6066d 15h /
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 6066d 15h /
24 Added changes for new dongle HW code 5 features nuubik 6066d 15h /
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 6066d 15h /
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 6066d 15h /
21 This commit was manufactured by cvs2svn to create tag 'version_1_4'. 6079d 18h /
20 Fix'ed TAR cycle second part this is not critical update nuubik 6079d 18h /
19 Fix'ed cycle type init code copy/pase mistake nuubik 6079d 19h /
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 6080d 19h /
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 6080d 19h /
16 Synchronisation with OpenCores release nuubik 6213d 16h /
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6330d 19h /
14 added comment on POR time influence when booting from LPC dongle nuubik 6342d 18h /
13 This commit was manufactured by cvs2svn to create tag 'SoftVersion_1_1'. 6444d 12h /
12 Added windows py bindings check with nice info print with link to installer nuubik 6444d 12h /
11 one ; in line end possible runtime error nuubik 6444d 12h /
10 fixed a typo nuubik 6448d 09h /
9 Made failing on port open retry nuubik 6448d 09h /
8 Added PCB level test options nuubik 6448d 17h /
7 Fixed pin modes and resyntesized nuubik 6448d 17h /
6 Fixed Cyclon part no in datasheets and drawings nuubik 6485d 15h /
5 This commit was manufactured by cvs2svn to create tag 'HWVersion_1_0'. 6511d 10h /
4 Changed LED SM front to falling to avoid large current switches at the same time as data nuubik 6511d 10h /
3 Changed outputs to LVCMOS and lowered drive current to 2mA to avoid noise on longer tracs and fast switching speeds nuubik 6511d 10h /
2 Initial global code commit nuubik 6525d 18h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.