OpenCores
URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] - Rev 38

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
38 bug fix on postcode displaying nuubik 5951d 03h /
37 Initial commit of EPCS1 (FPGA configuration memory) programmer to update dongle firmware nuubik 5951d 03h /
36 Initial commit of EPCS1 (FPGA configuration memory) programmet to update dongle firmware nuubik 5951d 03h /
35 Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88
(enable/disable memory reads)		 nuubik 5951d 03h /
34 For download of v5 dongle tool and manual nuubik 5953d 04h /
33 For download of v5 web release nuubik 5953d 05h /
32 For download of v5 datasheet nuubik 5953d 05h /
31 Newest available schematic nuubik 5953d 21h /
30 Fixed some typos in document nuubik 5953d 21h /
29 Added link to cheap ($40) ByteBlaster clone cable to update notice and fix'ed help typo nuubik 5953d 22h /
28 Quartus project files for HW code 5 project files nuubik 5954d 22h /
27 Initial commit of post code logger block and fifo used in the logger nuubik 5954d 22h /
26 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added post code logger block and LPC IO write flow control and flash lock when flash is programmed		 nuubik 5954d 22h /
25 Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output).
Added 64K byte block read when read length is 0		 nuubik 5954d 22h /
24 Added changes for new dongle HW code 5 features nuubik 5954d 22h /
23 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed.
Forced serial port to hw flow control mode.
Added support for new dongle HW code 5 to support fast read and fast write modes		 nuubik 5954d 22h /
22 Inlined dongle spesific Uspp code to dongle.py script separate Uspp is no longer needed nuubik 5954d 22h /
21 This commit was manufactured by cvs2svn to create tag 'version_1_4'. 5968d 01h /
20 Fix'ed TAR cycle second part this is not critical update nuubik 5968d 01h /
19 Fix'ed cycle type init code copy/pase mistake nuubik 5968d 03h /
18 Fixed in reset init of some trigers (this should not have generated extra hardware in FPGA but just to be on the safe side) nuubik 5969d 02h /
17 changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation) nuubik 5969d 03h /
16 Synchronisation with OpenCores release nuubik 6102d 00h /
15 changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed) nuubik 6219d 02h /
14 added comment on POR time influence when booting from LPC dongle nuubik 6231d 01h /
13 This commit was manufactured by cvs2svn to create tag 'SoftVersion_1_1'. 6332d 19h /
12 Added windows py bindings check with nice info print with link to installer nuubik 6332d 19h /
11 one ; in line end possible runtime error nuubik 6332d 19h /
10 fixed a typo nuubik 6336d 17h /
9 Made failing on port open retry nuubik 6336d 17h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.