Rev |
Log message |
Author |
Age |
Path |
102 |
Updated documentation. The documentation for these now also reflects that
these were drawn from an FPGA Library project, that is shared among many
FPGA builds. |
dgisselq |
2895d 08h |
/ |
101 |
Fixed the `defines at the top so that this can be built without any CPU.
This was then used to measure the impact of the CPU on the entire build, as
you could now build with no CPU, and then with a CPU to compare. |
dgisselq |
2895d 08h |
/ |
100 |
Includes updates so this can run at higher clocks speeds within an FPGA. |
dgisselq |
2895d 08h |
/ |
99 |
Includes high-speed updates. rxuart and txuart will now run at 200MHz on
an Artix-7, so should not impact timing (any more) on the XuLA platform. |
dgisselq |
2895d 08h |
/ |
98 |
Updated copyright notices for the new year, to reflect that changes have been
made in 2016. |
dgisselq |
2895d 08h |
/ |
97 |
Latest working bit file, with all changes attached as of this date. |
dgisselq |
2918d 12h |
/ |
96 |
Now accepts an SD-Card backing file, so that SD-Card reads *and* writes can be
tested. |
dgisselq |
2918d 12h |
/ |
95 |
Added write capability to the SD-SPI simulator. |
dgisselq |
2918d 12h |
/ |
94 |
Fixes a bug which had caused the device to die artificially and early, just
simply because the program connecting to the simulator shut its pipe down before
getting our last message. We now ignore this signal and continue. |
dgisselq |
2918d 12h |
/ |
93 |
Oops -- missed adjusting the copyright. |
dgisselq |
2918d 12h |
/ |
92 |
Fixes the problem whereby the master counters show when the user counters should
be showing and vice versa. Now the master counters show by default, together
with their correct labels. User counters are still available by pressing
'u' in the debugger, and the master counter display may be returned to by
pressing 'm' in the debugger. |
dgisselq |
2918d 12h |
/ |
91 |
Fixes bugs associated with an overflow of write acknowledgements in the
receiver. This helps keep our accesses aligned. |
dgisselq |
2918d 12h |
/ |
90 |
Reads and writes to the SD over SPI port now work. The card appears, as of now,
to be fully functional. |
dgisselq |
2918d 12h |
/ |
89 |
Bug fixes, following the adf_ce logic combining ALU/DIVIDE/FPU pipeline logic
into one register, this fixes that logic so that instructions without their
condition fulfilled are still "executed" and marked as done. |
dgisselq |
2918d 12h |
/ |
88 |
Adjusted copyright date. |
dgisselq |
2918d 12h |
/ |
87 |
Placed the interrupt into the carry chain for less logic area. |
dgisselq |
2918d 12h |
/ |
86 |
Fine tuning the `defines, so that you can build pipelined without pipelined
bus access and so forth. |
dgisselq |
2918d 12h |
/ |
85 |
First version of the SD-SPI interface, with partial functionality. (No the
empty link that was here before.) |
dgisselq |
2922d 09h |
/ |
84 |
First part of switching to proper sdspi.v, and not just the link. |
dgisselq |
2922d 09h |
/ |
83 |
Fixes a bug in the LX9 build whereby the flash was never ever granted permission
to use the SPI port. |
dgisselq |
2923d 13h |
/ |
82 |
|
dgisselq |
2924d 08h |
/ |
81 |
Adds register values for the SD-Card registers. |
dgisselq |
2924d 08h |
/ |
80 |
Currently working version: contains both a working DMA controller as well as
a working (as far as I can tell) SD-Card controller (writes not yet tested). |
dgisselq |
2924d 08h |
/ |
79 |
Adds 'bench' and 'sw' targets, and automatically builds them (now). |
dgisselq |
2924d 08h |
/ |
78 |
Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result. |
dgisselq |
2924d 08h |
/ |
77 |
Adds register names and values for the SD card interface. |
dgisselq |
2924d 08h |
/ |
76 |
Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device. |
dgisselq |
2924d 08h |
/ |
75 |
Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.) |
dgisselq |
2924d 08h |
/ |
74 |
Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged. |
dgisselq |
2924d 08h |
/ |
73 |
Simplified logic. |
dgisselq |
2924d 08h |
/ |