Rev |
Log message |
Author |
Age |
Path |
60 |
Removed obsolete README file, this information is now in BUILDING.classic. |
nyawn |
4612d 05h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
59 |
Autotools support. High-speed DLC9 support. Non-priviledged parallel
port access. Altera ByteBlasterII support. Bugfixes and minor speed
improvements. |
nyawn |
4612d 05h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
58 |
Added command line options for USB cables, allowing the user to specify VID
and PID of the cable, to make it easier to use clones. Set the ADBUS4 line
of FT2232-based cables to output / low, as some cables use this as an
active-low output enable (this line is NC on the ORSoC cable). |
nyawn |
4719d 05h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
57 |
Fixed multiple off-by-one allocation size errors which could have caused crashes under the wrong circumstances. |
nyawn |
4863d 03h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
56 |
Added support for GDB hardware watchpoints, which can co-exist with hardware watchpoints set by AdvancedWatchpointControl. Added support for two new packets in adv_jtag_bridge for compatibility with GDB 7.x. Improved full-system testbench for adv_dbg_if, now includes the same OR1K self-test used by adv_jtag_bridge. |
nyawn |
4931d 02h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
55 |
Promoted alternate USB-Blaster driver to full driver status as ft245. Added high-speed support to ft245 driver. Added schemes to limit the clock rate for parallel cables. Re-factored cable driver initialization. |
nyawn |
5033d 03h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
54 |
Added build instructions and Makefile to AdvancedWatchpointControl. Added
copyright headers to AWC source files. Fixed copy/paste error in
adv_jtag_bridge. |
nyawn |
5059d 04h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
53 |
Added includes for FreeBSD support. |
nyawn |
5096d 05h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
52 |
Fixed an error with BSD support I introduced. |
nyawn |
5096d 05h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
51 |
Added support for hardware watchpoints, including a hardware patch for the OR1200v1, changes to adv_jtag_bridge, and a GUI client program. Added a new top-level Patches directory for patches for third-party code. Added FreeBSD support to adv_jtag_bridge (contributed by Wojciech Koszek). |
nyawn |
5097d 02h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
50 |
Switched to explicitly-sized variables, in an attempt to support 64-bit architectures. |
nyawn |
5202d 09h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
45 |
Fixes for compilation under Ubuntu 9.04. |
nyawn |
5250d 06h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
44 |
Added forgotten header file. |
nyawn |
5250d 12h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
43 |
Added forgotten file. |
nyawn |
5250d 12h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
42 |
Added (experimental) Actel UJTAG TAP core. Added JTAG serial port feature to debug hardware core and JTAG bridge program. Added more speedups for USB JTAG cables to bridge program - USB-Blaster users should now see ~30k/sec upload speeds. Updated documentation. |
nyawn |
5250d 12h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
35 |
Updated to include new build options. |
nyawn |
5322d 05h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
32 |
Added a hi-speed mode via a change in protocol in the adv_dbg_if core. This should provide an order-of-magnitude speed improvement for some USB JTAG cables. Updated adv_jtag_bridge to match. Updated adv_dbg_if testbenches. Updated documents to reflect the new hi-speed mode. Added alternate USB-Blaster driver based on libftdi, donated by Xianfeng Zeng. Various bugfixes. |
nyawn |
5323d 04h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
31 |
Multiple users have reported poor performance with parallel ecables. Raul Fajardo determined that the usleep() call was blocking for much longer than microseconds, and that the system still functions perfectly without any added delay at all. Removed this delay. If strange run-time data errors occur, consider adding this sleep back in, a nanosleep, or a busy-wait loop. |
nyawn |
5420d 06h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
29 |
Fixed some mutex deadlocks. Thanks to Raul Fajardo and Jose Villar for reporting these. |
nyawn |
5489d 04h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
22 |
Fixed a bug in the XESS cable's inout function. This is the same bug that was recently fixed in the XPC3 cable. Thanks to Raul Fajardo for pointing this out. |
nyawn |
5505d 08h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
21 |
Fixed bug in Xilinx parallel cable driver (thanks to Raul Fajardo for the patch). Added ft2232 driver (thanks to Jose Villar). Added flush command to cable common driver, to support ft2232. |
nyawn |
5509d 04h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
14 |
Added support for the legacy hardware debug unit (debug_if) to adv_jtag_bridge. Re-factored adv_jtag_bridge, removed many compilation warnings. Renamed some signals in the TAP cores for clarity. Updated documents. |
nyawn |
5538d 05h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
13 |
Modified to build under Unbuntu 9.04: added stdint.h where necessary,
adjusted makefile for default install locations of libusb, removed windows-
specific usb.h file. |
nyawn |
5555d 10h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
8 |
Moved sub-modules to the correct subdirectories. |
nyawn |
5567d 04h |
/adv_debug_sys/trunk/Software/adv_jtag_bridge/ |
4 |
Software utilities for use with the Advanced Debug System. |
nyawn |
5567d 05h |
/adv_debug_sys/trunk/adv_jtag_bridge/ |