OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] [trunk/] [hw/] - Rev 67

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
67 renamed boot-loader.c to boot-loader-serial.c csantifort 4078d 09h /amber/trunk/hw/
64 Support latest Xilinx ISE 14.5 software. csantifort 4078d 10h /amber/trunk/hw/
63 Add support for Xilinx ISim Verilog simulator.
Remove Virtex-6 files.
csantifort 4078d 15h /amber/trunk/hw/
61 Add new netowkr based boot loader.
Remove support for Virtex. Spartan 6 only now.
csantifort 4365d 09h /amber/trunk/hw/
60 Bug fix; removed a combinational loop from the a25_decode logic. csantifort 4583d 05h /amber/trunk/hw/
59 Added modelsim script for reloading a wlf file after a simulation has been rerun. csantifort 4653d 03h /amber/trunk/hw/
58 Use TB.clk_count for the decompiler messages and removed the local counter csantifort 4653d 06h /amber/trunk/hw/
57 Add some debug messages csantifort 4653d 06h /amber/trunk/hw/
56 Remove the timeouts file from svn. Its an output file and gets now just gets created automatically
when sims are run for the first time.
csantifort 4653d 06h /amber/trunk/hw/
54 Bug fix for bug reported by Botao Lee. The mode bits in the decode stage did not change immediately
after a mode switch from a teqp instruction, but 1 cycle later. This meant the wrong set of registers
was selected for writing to for 1 clock cycle.
csantifort 4670d 06h /amber/trunk/hw/
53 Cleaned up Amber Verilog, removing unused signals. csantifort 4685d 04h /amber/trunk/hw/
52 Fixed typo in notes on creating DDR memory interfaces using coregen csantifort 4685d 04h /amber/trunk/hw/
50 Revert to previous version csantifort 4726d 04h /amber/trunk/hw/
49 Added a note n how to change timeouts csantifort 4726d 04h /amber/trunk/hw/
48 Fixed a bug in linux that caused the os to not return to the running application after an interrupt.
Hello-world now runs stand-alone again.
Added initrd-200k-dhry, a disk image that uses the dhry program for init.
csantifort 4730d 10h /amber/trunk/hw/
47 Changed V6 VCo from 1000Mhz to 1200 MHz csantifort 4750d 07h /amber/trunk/hw/
45 Store vmlinux.mem and vmlinux.dis in compressed form csantifort 4758d 05h /amber/trunk/hw/
43 Added support for the flat executable file format to vmlinux, so that the hello-world program is correctly relocated when it is loaded at the end of the vmlinux test.
Changed the Virtex-5 clock configuration to use a 1200MHz VCO frequency and 80MHz system clock frequency.
csantifort 4758d 06h /amber/trunk/hw/
42 Added write buffer - fixes bug if wishbone writes takes multiple cycles to complete csantifort 4776d 02h /amber/trunk/hw/
41 Added instructions on how to use Coregen to create the Spartan-6 DDR3 memory interface. csantifort 4777d 11h /amber/trunk/hw/
40 Added wishbone bus jitter testing option.
Cleaned up waveform log .do files, now seperate files for a23 and a25 cores.
Added vmlinux executable elf file for running on hardware.
csantifort 4782d 03h /amber/trunk/hw/
39 Added a second level of buffering to a25_wishbone_buf to fix a lockup
bug when write acks to not return immediately, and also to improve performance slightly
csantifort 4783d 04h /amber/trunk/hw/
38 support 128-bit wishbone now used for a25 core csantifort 4784d 04h /amber/trunk/hw/
37 128-bit wide boot memory module csantifort 4785d 02h /amber/trunk/hw/
36 Changed boot_mem for the a25 system to be 128 bits wide to match the 128-bit wide wishbone bus csantifort 4785d 03h /amber/trunk/hw/
35 Amber25 improvements:
Use 128-bit wishbone bus, instead of 32-bit to reduce cache miss fetch times
Use a fast barrel shifter for shifts between 0 and 4 to improve timing
Use a 2 cycle full barrel shifter for complex shifts
csantifort 4786d 10h /amber/trunk/hw/
32 Added clock cycle counting register to test_module to support dhrystone performance measurement csantifort 4789d 04h /amber/trunk/hw/
30 Bug fix - a write access was sometimes dropped when it was in a sequence of writes with variable wb_ack delays csantifort 4802d 10h /amber/trunk/hw/
29 Use lgo command for saving waveforms in modelsim csantifort 4804d 04h /amber/trunk/hw/
27 Got working with cadence nc simulator csantifort 4837d 11h /amber/trunk/hw/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.