OpenCores
URL https://opencores.org/ocsvn/can/can/trunk

Subversion Repositories can

[/] [can/] [tags/] [rel_20/] [bench/] - Rev 130

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
130 mbist signals updated according to newest convention markom 7575d 09h /can/tags/rel_20/bench/
127 Fixing the core to be Bosch VHDL Reference compatible. mohor 7591d 19h /can/tags/rel_20/bench/
119 Artisan RAMs added. mohor 7633d 05h /can/tags/rel_20/bench/
83 cs_can_i is used only when WISHBONE interface is not used. mohor 7697d 00h /can/tags/rel_20/bench/
68 CAN inturrupt is active low. mohor 7780d 04h /can/tags/rel_20/bench/
63 ALE changes on negedge of clk. mohor 7791d 20h /can/tags/rel_20/bench/
61 Bidirectional port_0_i changed to port_0_io.
input cs_can changed to cs_can_i.		 mohor 7794d 09h /can/tags/rel_20/bench/
60 rd_i and wr_i are active high signals. If 8051 is connected, these two signals
need to be negated one level higher.		 mohor 7794d 11h /can/tags/rel_20/bench/
59 8051 interface added (besides WISHBONE interface). Selection is made in
can_defines.v file.		 mohor 7794d 11h /can/tags/rel_20/bench/
52 tx_o is now tristated signal. tx_oen and tx_o combined together. mohor 7801d 00h /can/tags/rel_20/bench/
50 Top level signal names changed. mohor 7801d 00h /can/tags/rel_20/bench/
48 Actel APA ram supported. mohor 7804d 16h /can/tags/rel_20/bench/
39 CAN core finished. Host interface added. Registers finished.
Synchronization to the wishbone finished.		 mohor 7815d 01h /can/tags/rel_20/bench/
38 Temporary backup version (still fully operable). mohor 7816d 15h /can/tags/rel_20/bench/
37 Define CAN_CLOCK_DIVIDER_MODE not used any more. Deleted. mohor 7816d 15h /can/tags/rel_20/bench/
35 Several registers added. Not finished, yet. mohor 7819d 19h /can/tags/rel_20/bench/
34 Errors monitoring improved. arbitration_lost improved. mohor 7822d 01h /can/tags/rel_20/bench/
31 Wishbone interface added. mohor 7823d 14h /can/tags/rel_20/bench/
29 Overload fixed. Hard synchronization also enabled at the last bit of
interframe.		 mohor 7824d 21h /can/tags/rel_20/bench/
28 Bosch license warning added. Error counters finished. Overload frames
still need to be fixed.		 mohor 7825d 13h /can/tags/rel_20/bench/
26 Backup. mohor 7829d 22h /can/tags/rel_20/bench/
25 *** empty log message *** mohor 7830d 01h /can/tags/rel_20/bench/
24 backup. mohor 7834d 14h /can/tags/rel_20/bench/
22 Form error supported. When receiving messages, last bit of the end-of-frame
does not generate form error. Receiver goes to the idle mode one bit sooner.
(CAN specification ver 2.0, part B, page 57).		 mohor 7849d 02h /can/tags/rel_20/bench/
20 CRC checking fixed (when bitstuff occurs at the end of a CRC sequence). mohor 7849d 18h /can/tags/rel_20/bench/
19 RX state machine fixed to receive "remote request" frames correctly. No data bytes are written to fifo when such frames are received. mohor 7850d 01h /can/tags/rel_20/bench/
18 When a frame with "remote request" is received, no data is stored to fifo, just the frame information (identifier, ...). Data length that is stored is the received data length and not the actual data length that is stored to fifo. mohor 7850d 02h /can/tags/rel_20/bench/
17 Addresses corrected to decimal values (previously hex). mohor 7850d 22h /can/tags/rel_20/bench/
16 rx_fifo is now working. mohor 7851d 03h /can/tags/rel_20/bench/
15 Temporary version (backup). mohor 7854d 22h /can/tags/rel_20/bench/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.