Rev |
Log message |
Author |
Age |
Path |
117 |
spartan3e_starter_kit designs require DUALPORT from or1200_defines.v to be active instead of GENERIC. |
rfajardo |
4607d 10h |
/minsoc/tags/release-1.0/ |
116 |
Configure scripts were trying to copy/patch projects files before creating them. Ordering is correct now. |
rfajardo |
4607d 11h |
/minsoc/tags/release-1.0/ |
115 |
configure.sh script dir aware.
minsoc-install.sh logging to script dir. |
rfajardo |
4607d 11h |
/minsoc/tags/release-1.0/ |
114 |
Installation and Configuration scripts can be run out of any directory.
They assume they are going to process the files and directories found in the directory they are run from. |
rfajardo |
4607d 12h |
/minsoc/tags/release-1.0/ |
113 |
minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error
spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated
prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files |
rfajardo |
4607d 12h |
/minsoc/tags/release-1.0/ |
112 |
Updating installation & configuration scripts. |
rfajardo |
4608d 03h |
/minsoc/tags/release-1.0/ |
111 |
minsoc-install.sh: DIR_TO_INSTALL is required before using beautify.sh |
rfajardo |
4608d 04h |
/minsoc/tags/release-1.0/ |
110 |
Fixing several minor issues with the system:
-minsoc-install splitted into installation and configuration
-minsoc-configure.sh can be used to configure a fresh checked out system
-configure script used by both minsoc-configure.sh and minsoc-install.sh to configure
-rtl/verilog: svn externals fixed
-or1200 rolled back to release-1.0
-prj/scripts:
-Makefile has been used by simulation to differentiate project definition of vhdl and verilog files
-Altera was differentiating it in script
-now there are two scripts, one for vhdl and another for verilog. The differentiation occurs in Makefile as for simulation.
-altera_3c25_board/configure scripts had to be updated, vprj and vhdprj file extensions used to differentiate Verilog and VHDL project files.
-prj/src: or1200_top.prj downdated to definition of or1200_v1 |
rfajardo |
4608d 04h |
/minsoc/tags/release-1.0/ |
109 |
Creating a branche for release candidate 1.0. |
rfajardo |
4608d 06h |
/minsoc/tags/release-1.0/ |
108 |
Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.
Icarus Verilog and Altera synthesis are working as well. Job done! |
rfajardo |
4608d 09h |
/minsoc/tags/release-1.0/ |
107 |
Adding setup batch script for Altera synthesis on Windows.
prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.
Maybe the other scripts have to be updated too. This will be checked soon. |
rfajardo |
4608d 12h |
/minsoc/tags/release-1.0/ |
106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4608d 15h |
/minsoc/tags/release-1.0/ |
105 |
Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. |
rfajardo |
4608d 16h |
/minsoc/tags/release-1.0/ |
104 |
Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools) |
rfajardo |
4615d 15h |
/minsoc/tags/release-1.0/ |
103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4618d 06h |
/minsoc/tags/release-1.0/ |
102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4618d 06h |
/minsoc/tags/release-1.0/ |
101 |
Documentation, wiki's address updated. |
rfajardo |
4643d 18h |
/minsoc/tags/release-1.0/ |
100 |
syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. |
rfajardo |
4652d 16h |
/minsoc/tags/release-1.0/ |
99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4652d 16h |
/minsoc/tags/release-1.0/ |
98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4652d 17h |
/minsoc/tags/release-1.0/ |
97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4652d 17h |
/minsoc/tags/release-1.0/ |
96 |
Some files needed for Altera synthesis |
javieralso |
4653d 03h |
/minsoc/tags/release-1.0/ |
95 |
Makefile for Altera FPGAs fixed |
javieralso |
4654d 07h |
/minsoc/tags/release-1.0/ |
94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4656d 15h |
/minsoc/tags/release-1.0/ |
93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4656d 18h |
/minsoc/tags/release-1.0/ |
92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4657d 16h |
/minsoc/tags/release-1.0/ |
91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4657d 17h |
/minsoc/tags/release-1.0/ |
90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4658d 08h |
/minsoc/tags/release-1.0/ |
89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4658d 08h |
/minsoc/tags/release-1.0/ |
88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4658d 09h |
/minsoc/tags/release-1.0/ |