Rev |
Log message |
Author |
Age |
Path |
335 |
Switched o8_version.vhd to integer generics to make assignment from higher-level tools simpler,
Uploaded new version of TaskMan.zip, which uses the newer components |
jshamlet |
235d 15h |
/open8_urisc/trunk/ |
334 |
Updated version register to match task switcher example and rom core for the romtape entity |
jshamlet |
236d 17h |
/open8_urisc/trunk/ |
333 |
Fixed missing semicolons in o8_sys_timer_ii.vhd,
Added faulting address capture in the RAM models,
Modified o8_ram_1k.vhd to use 32-bit WPR |
jshamlet |
237d 04h |
/open8_urisc/trunk/ |
332 |
Added initial version of task manager project |
jshamlet |
237d 07h |
/open8_urisc/trunk/ |
331 |
Added custom SPI LCD interface (pending receive side) and watchdog timer. Also modified system timer II to use aliases |
jshamlet |
237d 07h |
/open8_urisc/trunk/ |
330 |
Updated to route RAM write fault signal and force CPU interrupts to task manager requirements. |
jshamlet |
243d 14h |
/open8_urisc/trunk/ |
329 |
Added a core that specifically supports the task switcher software. It merges o8_int_mgr16 with a wide register, allowing full control of I/O peripherals by the task switcher software. This also allows the task switcher to be enabled for the full 16 I/O write qualification lines, which had previously only been supported in the task data setup. |
jshamlet |
243d 15h |
/open8_urisc/trunk/ |
328 |
Documentation cleanup. Also added operand definitions. |
jshamlet |
244d 12h |
/open8_urisc/trunk/ |
327 |
More bug fixes:
Added write qual line to LTC2355 interface, fixed bug where output data was duplicating the lower byte in the averager, added an initial romtape.hex file |
jshamlet |
244d 17h |
/open8_urisc/trunk/ |
326 |
Minor comment correction |
jshamlet |
250d 14h |
/open8_urisc/trunk/ |
325 |
Added the rest of the initializers to the signal assignments |
jshamlet |
250d 15h |
/open8_urisc/trunk/ |
324 |
Modified the Open8 version of the multi-channel roll average code to have separate interrupt enables for average and flush operations. Note that the flush status bit should be checked by software prior to use if the Autoflush_On_Reset generic is set TRUE.
Also adding the ROMTAPE entity, which acts as a serial-access ROM for storing strings, arrays, etc. in order to alleviate pressure on the primary program ROM. It is intended for use with loops that load fixed content from ROM. |
jshamlet |
250d 15h |
/open8_urisc/trunk/ |
323 |
Forgot to add files |
jshamlet |
251d 14h |
/open8_urisc/trunk/ |
322 |
Performance fixes for the LCD interface,
Fixed incorrect entity name for the dual LTC2355 IF,
Added a CPU-accessible 8-channel averager core and FIFO-style ROM |
jshamlet |
251d 14h |
/open8_urisc/trunk/ |
321 |
Fixed issue with parity flag in receiver sticking |
jshamlet |
355d 07h |
/open8_urisc/trunk/ |
320 |
Inverted flow control signals to match EIA-232 specification |
jshamlet |
357d 10h |
/open8_urisc/trunk/ |
319 |
Fixed off-by-one error in channel count |
jshamlet |
358d 13h |
/open8_urisc/trunk/ |
318 |
Added o8_scale_conv.vhd and intdiv.vhd |
jshamlet |
362d 15h |
/open8_urisc/trunk/ |
317 |
Altered the reinit signal on teh adc128s022.vhd driver to be optional, and removed the "dead" signal from the upper level o8_de0_nano_adc_if.vhd code. |
jshamlet |
376d 12h |
/open8_urisc/trunk/ |
316 |
More code cleanup and comments,
Removed INT_VECTOR_n constants, as they are superfluous. There are no reasonable situations in which the constants would be altered. |
jshamlet |
376d 12h |
/open8_urisc/trunk/ |
315 |
Added Terasic DE0 Nano ADC interface and rolling averager. |
jshamlet |
376d 13h |
/open8_urisc/trunk/ |
314 |
Code cleanup and added comments |
jshamlet |
376d 14h |
/open8_urisc/trunk/ |
313 |
Added all generics to package component |
jshamlet |
376d 15h |
/open8_urisc/trunk/ |
312 |
Added o8_timer24.vhd as a more flexible alternative to o8_sys_timer_ii.vhd.
Also cleaned up some comments in the HTML documentation |
jshamlet |
376d 16h |
/open8_urisc/trunk/ |
311 |
Updated documentation to reflect generic switch controlling ROR/ROL behavior and the carry bit |
jshamlet |
420d 12h |
/open8_urisc/trunk/ |
310 |
Added optional DACadv signal to advance the PWM engine using an external signal. This is used to synchronize the DAC with other DACs or for streaming multiple streams across a high-speed serial link. |
jshamlet |
447d 17h |
/open8_urisc/trunk/ |
309 |
Comment cleanup |
jshamlet |
458d 01h |
/open8_urisc/trunk/ |
308 |
|
jshamlet |
469d 07h |
/open8_urisc/trunk/ |
307 |
Fixed comments on o8_version.vhd |
jshamlet |
676d 17h |
/open8_urisc/trunk/ |
306 |
Moved REINIT_TASK_TABLE_PTR call to INITIALIZE_TASK_STACK |
jshamlet |
680d 19h |
/open8_urisc/trunk/ |