Rev |
Log message |
Author |
Age |
Path |
195 |
Added dual-port RAM core for SDLC interface. |
jshamlet |
1547d 13h |
/open8_urisc/trunk/VHDL/ |
194 |
Cleaned up licensing sections |
jshamlet |
1547d 13h |
/open8_urisc/trunk/VHDL/ |
193 |
Fixed incorrect comment in o8_alu16.vhd. The value of the write to 0x1F doesn't matter, as the write itself triggers the calculation. |
jshamlet |
1547d 13h |
/open8_urisc/trunk/VHDL/ |
192 |
Added SDLC packet engine |
jshamlet |
1547d 14h |
/open8_urisc/trunk/VHDL/ |
191 |
Cleaned up comments, added back the OPEN8_NULLBUS constant, and added some new modules for ADCs and LCD displays.
Also made the button input module more configurable by moving the debounce code to a separate entity and using generics to instantiate it. |
jshamlet |
1547d 14h |
/open8_urisc/trunk/VHDL/ |
190 |
Fixed a bug in CPU where RTI/RTS wasn't idling the instruction cache, causing intermittent failures where RTI would execute as RTS, corrupting the stack;
Fixed a bug in the real-time clock where the uSec tick generator would stop if the PIT timer value was left/set to 0x00. |
jshamlet |
1559d 11h |
/open8_urisc/trunk/VHDL/ |
189 |
Merged changes from private repository,
added ceil_log2 function to Open8_pkg, since it is used to calculate RAM vectors,
cleaned up comments and removed local copies of the ceil_log2 function from peripherals. |
jshamlet |
1560d 12h |
/open8_urisc/trunk/VHDL/ |
188 |
Added a generic to alter the behavior of RTI so that it can optionally skip restoring the general purpose flags GP4 to GP7, allowing ISR's to make persistent changes to them. Also exported these flags to the top level for use outside the CPU. |
jshamlet |
1560d 15h |
/open8_urisc/trunk/VHDL/ |
187 |
Added the CPU_Halt input, only now as an input to the instruction decoder. The CPU_Halt line will assert the registered CPU_Halt_Req, which will cause the instruction decoder to abort the current instruction, reset the PC, then enter a hold state until the line is deasserted. Additionally, a very minor bug that could cause the SMSK instruction to effectively execute twice if interrupted was fixed. Lastly, cleaned up the comments even more. |
jshamlet |
1562d 11h |
/open8_urisc/trunk/VHDL/ |
186 |
Merged the interrupt override logic into the case structure, simplifying how interrupts are processed. |
jshamlet |
1565d 11h |
/open8_urisc/trunk/VHDL/ |
185 |
1) Fixed an apparently long-standing bug where the interrupt bit wasn't being cleared after an RTI
2) Modified the program counter logic to be simpler. It now always increments, and states control the increment using the offset field. A new set of constants was added to replace the old states.
3) Modified the ALU to always use Operand1 instead of ALU_Ctrl.Data (and removed the field in the record). A new ALU command, ALU_GMSK, was added, as it was the only instruction to set the .Data field to something other than Operand1 (Int_Mask)
4) Modified the package file so that flag names match what the assembler calls them. FL_Z is now PSR_Z, FL_GP1 is now PSR_GP4, etc.
5) Cleaned up the comments and code formatting |
jshamlet |
1565d 13h |
/open8_urisc/trunk/VHDL/ |
184 |
More file/entity renaming to match private versions. |
jshamlet |
1567d 13h |
/open8_urisc/trunk/VHDL/ |
183 |
Renamed core to o8_cpu to match new naming scheme |
jshamlet |
1567d 14h |
/open8_urisc/trunk/VHDL/ |
182 |
Simplified the address generation logic at the expense of making LDX take one additional clock cycle. This allowed the address logic to be split out of the main state machine and simplified (greatly). During this process, a bug in SDO was found and fixed that caused it to return through the wrong pipe fill state wnen auto increment was disabled. |
jshamlet |
1567d 14h |
/open8_urisc/trunk/VHDL/ |
181 |
Altered the RSP instruction to allow the stack pointed to either be restored from registers or stored to registers based on the status of a processor bit. Also modified LDX to simplify the address logic. |
jshamlet |
1568d 10h |
/open8_urisc/trunk/VHDL/ |
180 |
Added additional Open8 compatible modules |
jshamlet |
1572d 14h |
/open8_urisc/trunk/VHDL/ |
177 |
Fixed comments in RTC module |
jshamlet |
2892d 14h |
/open8_urisc/trunk/VHDL/ |
176 |
Fixed documentation errors,
Modified uSec_Tick such that it is always generated regardless of the interval. |
jshamlet |
2897d 12h |
/open8_urisc/trunk/VHDL/ |
175 |
Added 4 and 8-bit LCD interfaces with backlight and contrast DACs |
jshamlet |
2897d 17h |
/open8_urisc/trunk/VHDL/ |
174 |
Added ROM/RAM wrappers |
jshamlet |
3092d 11h |
/open8_urisc/trunk/VHDL/ |
173 |
Added a couple of useful interfaces for detecting button presses and clock changes. |
jshamlet |
3092d 11h |
/open8_urisc/trunk/VHDL/ |
172 |
General code cleanup |
jshamlet |
3092d 12h |
/open8_urisc/trunk/VHDL/ |
171 |
Fixed comments for offsets 0x0 - 0x3 to indicate the read value |
jshamlet |
3092d 12h |
/open8_urisc/trunk/VHDL/ |
170 |
Added 24-bit resolution epoch timer / alarm clock |
jshamlet |
3092d 12h |
/open8_urisc/trunk/VHDL/ |
169 |
Corrected issue with CMP and SBC generating an inverted carry flag and added new constants to the package file to simplify interfacing new modules. |
jshamlet |
3147d 12h |
/open8_urisc/trunk/VHDL/ |
168 |
Simplified write data path logic,
Converted RTC to packed BCD,
Corrected several bugs in real time clock component, |
jshamlet |
3926d 09h |
/open8_urisc/trunk/VHDL/ |
167 |
Updated CPU model; Pipelined ALU control signals to improve fMAX, corrected issue with interrupt controller priority not being obeyed, fixed bug in auto-indexing instructions where the upper register wasn't being properly incremented, cleaned up code to make the processor model easier to follow.
Added several useful modules that use the Open8 bus. |
jshamlet |
3934d 07h |
/open8_urisc/trunk/VHDL/ |
164 |
Modified the data path to allow the bus to go idle while waiting for an interrupt. This makes it easier to debug code that uses the WAI instruction, as both Wr_Enable and Rd_Enable go low. |
jshamlet |
4570d 03h |
/open8_urisc/trunk/VHDL/ |
162 |
Added optional generic to specify that the BRK instruction implements a WAit_for_Interrupt (WAI) instruction instead. Logically emulates INT, but without triggering a soft interrupt. Note that the NOP instruction maps to BRK, and will not function correctly if this option is set. |
jshamlet |
4660d 20h |
/open8_urisc/trunk/VHDL/ |
156 |
Optimized for timing,
Flattened block structure to single entity. |
jshamlet |
4717d 10h |
/open8_urisc/trunk/VHDL/ |